will Infinity pedal work with Inscribe?
Posted By: Lee on 2006-06-02
In Reply to:
I'm switching companies and foot pedals and don't understand. I'll be using Emdat-Inscribe, and the pedal I have is an Infinity USB1. Are these compatible? I've done what it says to do on the site for other pedals and it still won't work. Does anyone know if this Inifinity foot pedal will work with Inscribe?
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
I had found an earlier post that said Infinity would work with InScribe, but sm
I don't think the poster knew about the most recent upgrade.
I had also read about the start/stop pedal being frustrating due to it not stopping immediately. I did find one at Dictran that said exclusively for InScribe, but there are two types there, so that was also confusing!
have never been able to get my Infinity pedal to work...
with Express Scribe. It's a pain, but I've just used the manual controls.
Does your Infinity pedal work with DocQscribe?
Just wondering if your Infinity foot pedal works in DocQscribe? Does it automatically recognise it?
My friend has a footpedal that a former employee of Medquist was using, and went to use it as a new employee with MedQuist and it won't work now. It works in Express Scribe perfectly. MedQuist says you have to rent one from them and they won't "troubleshoot" problems with the pedal since it wasn't purchased through them......(even though it was by this former employee).
Any suggestions?
A regular Infinity USB pedal should work with their system. Why not ask them for sure? nm
s
If the latest version, post below says regular Infinity pedal will not work and cannot use outside p
Express Scribe and pedal DO work with InScribe upgrade
That is not the case with me. I just upgraded to 4.91 and am still using Express Scribe and it's working fine. I do have an Infinity USB pedal. I do, however, have Windows XP or ME (I never remember which - XP I think) and not Vista. The tech guy at InScribe said some people have problems with the upgrade of 4.91 and Express Scribe with Vista. They have special directions on their download site for Vista users. Hope this helps someone. The new upgrade looks good, though I've not had a good run with it yet.
Bringing up ExpressScribe pedal question again. Does anyone have 9-pin Infinity pedal on a USB?
tia
Infinity wav pedal
The Infinity wav pedal comes in three configurations, IN-USB-1, IN-BMG (15 pin) & IN-DB9 (9pin).
What wav player program are you using, Express Scribe?
Have you upgraded your operating system?
Brad
cost-plus.com
800 561 8106
I use my USB Infinity pedal..nm
x
Infinity pedal
I use the same pedal I used with DQS with MQ. It's Infinity. If you want the specifics, I can look them up. In Emdat you will have to do a pedal wizard thing to get it going. I thought it wasn't "taking" because it was so simply. I was doing and then undoing what I'd did. When it says to press the pedal. You simply step on an off of it and not keeping holding it down, which is what I also did and others have done I believe. In other words, complicating an easy task which I do!
The pedal is Infinity IN-USB-1.
The headphone, and I have tried several, plugs into the little audio hole on the computer. The OS is XP. I hope that covers it.
Thanks
My foot pedal says Infinity on it. (sm)
A lot of people refer to a wave foot player as any basically any pedal, but there is an actual brand that is a WAVpedal. You can use Google and find a lot of answers that way.
Infinity or what kind of pedal??
How do you know what kind of pedal you have? I see no markings on mine to identify it. I see you all talking all the time about them, but don't know what I have except that it hooks into a USB port. ?? Can you tell me how to identify? Thanks.
Can anyone help with Infinity foot pedal??
Help! Just bought a used infinity foot pedal, works fine with Express Scribe but can't figure out how to get it to work with DSS. I don't have a serial port that it will fit into in my computer, but have it plugged in with an adapter/USB plug. I have Olympus DSS player 2002 software installed on my computer and tried to play an old file and it would not work. I need to be able to play wav files. Help!
Infinity USB pedal is a common one. See that and others
s
Infinity Foot Pedal
I have a brand new Infinity foot pedal I have never used if you are needing one. Please write me back. Thanks Mary
Infinity Foot Pedal
Can someone please help!! I can't seem to program my foot pedal for back space or fast forward. I can use the "F" keys but would like to use the pedal only. No matter where I press all I get is current dictation. Any help would be greatly appreciated.
Should have added below that my Infinity USB pedal works with it as well.
An Infinity 3-button pedal will do just about everything. Your headset
s
Food pedal, hee hee. Mine's an Infinity...
I've used a Dictaphone foot pedal, too, but it came with the Dictaphone. Try searching on E-bay for foot pedals or Infinity foot pedals.
Get an Infinity USB pedal from transcriptiongear.com or the Transcription warehouse. I think
s
Infinity USB pedal and Express Scribe software. sm
You may need to install an additional file to play .dss files.
This setup works for me.
I think your Infinity foot pedal has iNet software
set up so it will not play with Express Scribe (I had the same problem). I ended up buying a new Infinity foot pedal off ebay for $65 including shipping and it works fine on Express Scribe and WinScribe. Good luck!
Bought Infinity foot pedal 9 pin and works with Expresscribe.
Specifically what foot pedal did you buy and why can't Expresscribe help you if you bought it from them?
Inscribe foot pedal
If you go to Dictation on toolbar, there you can cut the playback time. It took me a while to get used to it, but once you have the playback to where it works for you, it's actually not bad at all. I used the F2 instead of the foot pedal for a while, and when the upgrade came, my foot pedal now works with the new version. I have my playback at 2 sec, and I cruise now. Good Luck. I think you will like it once you get used to it.
Inscribe foot pedal -
I think I found something that will help. Go to options and click on Set date/time values, there it had where you can pick the seconds on the recall. I believe the reason why those other options were in the gray is because you have to be in a report to make those changes. Try and let me know.
Emdat/Inscribe foot pedal?
Does anyone have any experience with what foot pedal to use for this? I went to the site and they suggest a DicTran pedal that is pre-programmed to work with your keyboard. Also, when you do use it, do you need to press the F1, F2, etc. keys on your keyboard or just use the pedal and that's it? It's also been suggested to use a Gearsplayer, but that's kind of expensive with getting the software, totalling $200. It would be $106 for the DicTran pedal. I have a Dictaphone pedal right now, but was told that would not work with Emdat. Please help!
Thanks!
Emdat foot pedal/Inscribe
I've read mostly negative comments about this. Does it work with Microsoft 4000 Keyboard? Is it decent to use as long as demos are pre-filled? Is it hard to learn? Thank you for suggestions.
An InScribe foot pedal question. sm
I've just installed a USB pedal in order to work with the built-in player in InScribe.
This pedal is not like any other I've ever used. The voice continues a few seconds after I release the pedal and when I push down again, it has backspaced several seconds, which slows me down like you wouldn't believe!
It's bad enough with not being used to the pedal, but with the built-in player, there doesn't seem to be any way to speed up the voice or adjust the backspacing.
Does anyone know of a way to do this?
I would really appreciate some advice as it takes a while for the Emdat folks to respond.
emdat/inscribe foot pedal
What type of pedal works with this and where did you get it?
Thanks.
need emdat/Inscribe foot pedal
thanks
What type of foot pedal do you need to use Emdat/Inscribe?
Is it USB? If you have a 9-pin, can you use a converter?
InScribe upgrade- can still use Express Scribe with my pedal
That is amazing! I did play with InScribe while ago to see what all happened with the different options and in case the upgrade would not let ExpressScribe work with my pedal, but surprising to me, after the upgrade, my pedal still works fine with ExpressScribe. I have an Infinity USB. The tech guy at Inscribe had said some people had problems with Express Scribe and Vista, so I guess if I get a new computer in the future and am forced to have Vista, at that point I'll learn to use the keys....anyway, thanks everyone for their input.
EMDAT/InScribe foot pedal issues
I have an Infinity foot pedal that I am using with EMDAT/InScribe. The pedal works, just not very well. There is a 2-3 second delay and sometimes it will not stop the audio. I cannot play the audio file at all if I am not in the InScribe program window. Sometimes I will lose the audio all together if I am on the web researching things. It is very frustrating! I have tried every suggestion on the support page. I have updated everything on my computer and ran every scan possible. I do not want to buy a new pedal as this one works. I hope there is some kind of "fix" for this. Any suggestions would be GREATLY APPRECIATED!!!
I am running Windows XP professional with Service Pack 3, DSL, Trend antivirus, and the latest versions of Windows Media Player, IE, InScribe, etc.
Thank you Thank You THANK YOU in advance!
Anyone work for Inscribe in Kentuckey?
I was just wondering how the process went when being hired? I was told to get my paper work back and then they would call me and set up for an installment appointment, but it has been several days and I haven't heart anything. Is that just how the process is or should I be worried? Thanks!
Anyone work for InScribe in Kentucky. nm
:
Is there ONE pedal I can buy that will work with ALL platforms? And where do I shop for a pedal?
.
Help getting wav pedal to work
I ordered a new Olympus RS25 pedal off of ebay, but am not sure how to get it to work with the express scribe program. Please help if you have any clue.
The pedal did not come with any software and the lady said it should automatically work with Express scribe, maybe I am not doing something right
TIA,
sunny!
Me too! Only wish I could work the pedal with my
Big fuzzy bunny slippers. 
I could never get the pedal to work!
I have a foot pedal that is plugged into a USB gameport adapter. How hard was that supposed to be? Yeah right.
I ended up downloading Transcription-Buddy, which is a free download and then downloaded NCH Swift Sound - sound Switch converter to change them over to wave files or whatever it was I could not open. This also was free. If you get it downloaded
Go under view and options and over on the right to foot control and I ended up using the Microsoft PC joystick selection.
http://www.download.com/Transcription-Buddy/3640-2064_4-10221580.html?sb=1
http://www.nch.com.au/switch/
foot pedal---any one will work I think, SM
I type on the Dictaphone Transnet platform and have two pedals and they both work. I am not sure the brand, but they are nothing particular. One is a USB and the other is a 9-pin. I am using the 9-pin right now.
Did your foor pedal work
with Real Player?
Getting foot pedal to work (sm)
Does anyone have advice for getting a foot pedal to work for downloaded internet files. I have plugged this into the USB port but my computer is not recognizing it. Does having an ipod and its components installed/downloaded affect the foot pedal. TIA
how do you work the foot pedal?
this looks cool! :P
how do you compare your lph with this versus a regular keyboard?
thanks
I got my foot pedal to work
THESE ARE THE STEPS YOU NEED TO FOLLOW TO GET YOUR PEDAL WORKING, I DID AND IT WORKS.
The only steps you must follow are 14-16 to get the Footpedal working with InScribe.
After jobs have downloaded, click on Options Menu and select "Separate Play and Pause".
14. |
|
15. |
On Options Menu, select "Set Actions". |
16. |
For the F9 key, you will see "Save". Drop down the list next to the F9 key and select "Pause". The actions are in alphabetical order so you should scroll up. Now select "Pause" and press OK or Close. |
Help! Can get foot pedal to work
I have started a new job with Landmark but cannot get my two foot pedals to work with Bayscribe. Could someone please help me!
Thanks in advance!
Foot pedal will not work
Sorry, I am just so upset because I need this job and neither of my 2 foot pedals seem to work with Bayscribe and in trying to get it to work I think I may have messed up the driver. Any help would be appreciated!
The files need to be associated with a player for pedal to work.
s
Foot pedal will not work with Bayscribe
Thank you so much. I believe we did this but for some reason it does not work. Have been at this all day and I am exhausted from trying to figure out the problem. Could you tell me what the difference is between a VEC USB foot pedal and a USB foot pedal. That may be the problem,although both foot pedals have worked with other "tests" with other companies so I am just confused why it will not work with Bayscribe.
Again, thanks so much!
Susan
I put a heating pad in front of my pedal on low. Socks don't work 4 me.
x
No! And boy do I know where you're coming from! I tried to get the Olympus pedal to work, but..
wound up pulling my hair out instead. They don't make it easy on us, do they?!?!? 
|
