setting up macros in word

I used to do this about 8-10 years ago, but forgot how to do this.  Please post how to do this.  This is for Word 2002.

Thanks

• setting up macros in word - ae
  • Know what you mean. But, poster said below to go - kate
  • Please go to Word help for this info. - sm

The messages you are viewing are archived/old.
To view latest messages and participate in discussions, select the boards given in left menu

Thank you for replying to my VR macro question on mtstars.  I was hoping someone like you with knowledge of Instant Text and VR work could help me out.  Could you give me an example of how you would set up a macro to change a period to a comma and uncap the next letter in Instant Text for example?  Do you think using macros and commands like this in Instant Text is more productive than creating them in Word? 

If so, try this....Go to microsoft.com and search for Word 2000 Supplemental Macros.  When you get the article, it will tell you to download the small application.  You will open the application in Word, and it will give you instructions on backing up the macros you already have.  You will do this on the computer you want to move macros from.  Once you have made a backup copy, email it to yourself.  Go to the computer you want to put the macros on.  You will need to download the Word Supplemental 200 Macro application on this computer also.  Save the email you sent yourself on your desktop, and open the application in Word again just as before.  You will select restore and pick the file on your desktop to restore to.  The macro will do all of the work and transfer all of the macros into your new computer. 

Now, if this is not want you wanted....... never mind.....

for line numbering?  It keeps indenting 1-2-3,etc. to the first tab and I need the numbers along the left margin.  I went to <format>, <bullets and numbering>, <customize>, and changed the number position and alignment, and it lines everything up on the left margin. 

However, if I have another numbered section in the report, it goes back to the default setting, indenting to the first tab. 

Is there a way to change the default, or do I have to go through these steps for each numbered list? 

Thanks!

Hi All,

I will be starting a new job soon, and it looks like I will be typing in my own computer's Word program.  I managed to download my old Expander entries from my old job into Notepad, so I now have a list of my expansions.  I am wondering if anyone has any good tips on doing something  with the Notepad entries to get them into AutoCorrect in Word, or do I have to just go through the whole list manually and make new entries into Word AutoCorrect to use for my new expander?

I am also open to any and all suggestions to the Word spellchecker since it does not know LOTS of medical terms and drugs.  Just start entering them manually or buy a medical spellchecker that interphases with Word? I saw some listed when I Googled it, but they seem awful expensive.  100$ and more.  Any suggestions?

THanks!

When you open your Word document, there should be an option in the toolbar above that says "Developer." Enter Alt F8 to view your macros, but I think you have to manually hit the Record Macro to enter new macros.

p.s. I prefer the previous Word version over this "new" one.

I have turned off my macro function somehow in MSWord.  I can't record or play macros.  I get an error message ' compiled error - invalid outside procedure'.  I have tried many things, I have changed my security to low, but still cannot run macros.  I have gone online and have tried suggestions on 'visual basic editor', but still nothing.  I need help, I do not use a word expander, I create and use macros and insta-text for myself.  If anyone has any suggestions, please share! 

Thanks so much!

-Jade

I have never been able to figure out how to do special format characters in ShortHand, but if your Word version allows you to make Macros, you can set up a Macro that will do the same thing as ShortHand.  If your transcription platform does not accept Macros, you might still be able to “trick” it by then linking your ShortHand to your Word Macro.  It works for me but every Word version and transcription platform is different, so you may have to play around a bit before you hit the right combination.  If you need specific instructions to set up the Macro let me know.  Good Luck. 

I really don' t see all that much need to buy a ShortHand program, especially when you are just starting out and probably put out a lot of money already. Just click on your toolbar, click on autocorrect, and you will get a menu that you can use to add in your new expansions. 

if you would like to access this toolbar from your keyboard, you can create a macro that will do this.

Sub ATxtShow()
Dialogs(wdDialogToolsAutoCorrect).Show
End Sub

Paste this into your macro editor, and now record a "hot key" macro on whatever key(s) you would like to use.  I use alt-5, but you can use any alt or control key combination you have free.

I certainly hope this macro posts properly, I tried 3 times to post a macro that to count characters, and each time a quote mark was removed by the system, but I hope this will post properly.  I will follow up on this immediately after posting and make sure it is correct.

if you try to start an MT business right out of school.  Unfortunately, people take the college courses for MT just to find out that most employers do require experience.  There are companies that do hire newbies, but one must have attended an "approved" school.  It's not too late for you though.  I see you as having 3 options:

1. You attend an "approved" MT course/start over with schooling.

2. You apply everywhere, check your newspaper, keep looking.

3. You attempt to start up your own business and learn as you go, although I highly don't recommend this route. 

Good luck!

I'm at a loss - I cannot find a manual anywere about how to set up my Lanier LX-219 equipment.  I have the terminal block, module and the unit.  two phone plugs on the grey box, one phone plug on the back of the unit.  Does anyone know where I can find a manual on how to set up the equipment? Thanks in advance

If so, find out what others in your area are charging. If you think you should be paid more because you're doing pathology, then charge more.

If you're being offered a rate, then do you consider it to be enough? No one else can really answer those questions but you.

I've been doing some research on here and checking out various links and such regarding setting up my own accounts but am finding myself more confused than ever!   I've noticed some talking about things like mydocsonline, bytescribe, wav player, Olympus, etc., but how exactly do these work?  I'm assuming there is a system in their office or on their end and then I use some sort of system or connect with that to get jobs? How does this all work?

I've been looking into this and trying to understand how it works, as when I recently went to the ENT office they asked if might be looking for some work .  I didn't feel comfortable talking about it in depth because of my lack of understanding.  They are a mid-sized practice with 2 offices and probably less than 10 physicians.  Any info or advice anyone could offer would be greatly appreciated.  Please feel free to email me also if you'd like.

You purchased an IN-155 foot pedal for compatiblility with DVI VoiceWav.  (We have sold nearly 1,000 of these with zero returns.)

When you called our toll free 800 number for support we told you that the problem was not the pedal and was either the software you were using or your computer.  Reluctantly, we agreed to do an exchange for you.  (FYI, when your first pedal came back to us it worked absolutely perfectly and still does.  In fact it is plugged into the same computer I am typing on at this moment.  It has been tested daily since it came back with no problems).

Now, you voice incorrect information on MTStars.  Your problem is in your computer.   

Please feel free to call us yet again if this is not clear to you.

Tom Wilkes

President

Executive Communication Systems

(800) 644-9525, ext. 101

I have an older transcriber (DAC Model DA-125) and have had it for quite some time now.  I moved my office over the weekend and had to unplug the machine.  Well, my backspace has reset to practically nothing and I can't find my manual on how to reprogram the backspace.  Is there anyone else out there using this phone and if so, how to do reprogram it for the backspace length?

Thanks so much for your help.

Tabatha in Charleston

I will be starting a second job next week and need to use that companies computer.  I know I need a syslink router to enable them both to use our cable modem, but I know there is a box you can get so you can use one monitor and turn the dial to switch back and forth between computers.  Anyone know what this is called and where to get it?   Also, is there a way to use only one mouse and keyboard also, or will I have to have 2 keyboards and 2 mice on my desk?  (I have a small desk and am limited on space).  Thanks for all help!!

for automatic numbering to the left margin by:

1) Open MS Word
2) Select Tools
3) Select Autocorrect
4) Click on the tab 'Autoformat as you type"
5) Make sure the box 'Automatic numberer lists' is checked (it's about the 8th box down)
6) Click on okay (otherwise your change wont take)

I hope this is what you meant.

if they just want people to quit.

every night in a different motel, and with no laptop, either.  I just used whatever table they provided and setup my total PC system, and got the work done.  Not the usual situation, but it worked fine.  It sure was not a vacation, though, but a cross country move.  Had to stop by dark every night and get some sleep, get up a midnight to work 6 hours, then move on.  Made a lot of money, at least as much as usual.