printer not printing

Thank you for all the help. I tried everything and then called the place where I bought the printer. Three days of no printing, the morning the tech was due here the thing printed! He came out and determined that we probably had a "brown out" and that something was hung up in memory and it eventually cleared itself. Had a few other questions for him and so I guess the $90.00 for his 45 minutes of time was somewhat worth it!

• Printer not printing - sammypot
  • printer not printing - sammypot
  • New company software installed? You might have Their printer installed as default. You'd have to - choose your own to print then. nm
  • Control Panel, Printers & Other Hardware, View installed - sunny saturday
  • I had that problem and went in and deleted the ... - M.A.

The messages you are viewing are archived/old.
To view latest messages and participate in discussions, select the boards given in left menu

My hp LaserJet 1300 will not print what I send to it, however, it does print a page with a single line at the top - ?%-57755}euom%oog/ and so on.

I turned off the printer for 1/2 hour and tried again and it is still doing this.

Any ideas?

Thank you. Barb

driver in order to work.  You have to configure your USB port for this.

If they were to provide you with the ink cartridge then you would have to put it in and out everytime you printed something personal or for someone else.   You will probably go through 1 to 1 1/2 cartridge per year for their printing needs and this is an expense of doing business included in your cpl.   I do all my printing and do probably close to 35,000 to 40,000 lines per month and go through about 2 to 2.5 toners for my HP which is about $200 to $250 per year -- not even $20 per month.  At 10 cents per 60 charcters that is a decent  price and if it is decent lines, pretty good dictators I sure would't rock the boat over that.  Again, if you do they could go elsewhere or else give you a toner and say do not use it for anything else and ask for documentation when you use it.  If you become petty over this, they will become petty.  I just would not start out this way, but then I have been told that I am too easy on accounts but then they have been with me for many, many years, and pay on time and treat me well.   So do what you feel is best but to me it is just being somewhat picky. 

When I print something from this site, i.e. a reply, the copy comes out very, very light. Is there a reason for this?

I am trying to copy and print my ShortHand Dictionary (the list of expanders) and cannot seem to find the way to do it.  Can anybody help on this one.  By the way, Happy National Transcription Week!

TIA.

I just bought an HP Photosmart 2610v that is an all in one printer, fax, scanner, copier. I really don't want to have to go out and buy another new printer. :( I really appreciate you letting me know that a laser printer eliminated this problem. Which one do you use that eliminated this problem??? I might have to resort to this.

Also, I am trying to get them to consider going digital so I would not need to print anything for them (unless they were willing to have me just deliver transcription one day a week - I might consider that). However, I don't know how we can resolve the issue IF I do get to go digital and I won't be doing the printing and there creates another problem unless they have a printer that wouldn't do the same thing as mine. 

Thanks again! 

Laser will work better because  the laser uses a different mechanism -- do not understand all of it but it was explained to me.  Some of it is because something has already been printed on the paper when it runs through a ink jet.  But my laser printer, have a large one that cost a lot, but it works so well it has paid for itself in the past 4 - 5 years.  But there are some inexpensive ones out there also.  But what you need to do is when you try a printer out  --- take samples of what you will be printing on to the store and try it.  Might waste some paper but it is worth it.   I use the sticky  paper and had a lot of problems because of the weight of the paper and that is why I had to go with laser.  Also do 40 to 50 envelopes a day and needed that.  

Be prepared that if you go digital and they will print off -- they will probably want to drop your cpl since they are doing part of the work.   That happened to me.   So see what the trade off is. 

HP laserjet 1300 - when I try to print anything all I get is one line of characters, i.e.

*()@#&#()%*097839371mvijdkfa205

Has anyone had a similar problem and/or any ideas as to what I need to do other than call a repair service.

Thank you

I know many of you may not even print at home, but I have to, and I'm running into a big problem with my new laser printer getting jammed up by the sticky paper. It's a Samsung ML-2510. I'm having to feed the paper one page at a time in order to get it to go through.

Are there any good brands/types that work well with the sticky paper?

I was using my inkjet printer, which took the paper fine, but the cartridge was running out in about a week's time, and I couln't afford to buy a new one once a week.

Ideas?

I may need to purchase a laser printer as the SOAP sheets that the office I work for sends to me are jamming in my HP ink jet printer. It has to be due to the writing that is being done on these SOAP sheet pages at the top where they fill in pertinent patient info, i.e., name of pt, vitals signs, birth control, etc., as well as how much the paper is being handled, shuffled, corners getting bent, etc. 

I have a new ink jet printer and have always had a problem with these sheets in every ink jet printer I have owned but my newest (and nicest printer thus far) it is happening more than ever before. It is very frustrating and time consuming to deal with this.

I was told that laser printers do not cause this problem as they utilize a different mechanism in printing. So, I may need to purchase a laser printer but would like some recommendations. I cannot afford a lot. I am hoping if I have to do this I can find a good one for around $400. I would appreciate your suggestions.

Thanks so much.

If you can solve this problem - you are really good!!  Here it is - The office I work for has just changed the margins and the bottom margin is now 0.3.  However, everytime that I change the margin, the computer automatically bumps it up to 0.46.

The computer savvy person in the home office believes that it has something to do with a preset margin minimum in the printer which will not allow it to accept the margin.  The computer tech where I bought the computer believes that also.  BUT - no one knows how to go about changing that. 

My printer is an HP PSC 2210 all-in-one.   Calling HP is not an option since the printer is possibly 4 to 5 years old and out of warranty so therefore the charge for their advice is not worth it!!

Does anyone have any ideas or suggestions??  So far, this has stumped everyone!  Thanks in advance.