assign key on Lanier-need help!
Posted By: Cindy on 2006-11-27
In Reply to:
I'm trying to re-listne to a job I signed off. I need to find the assign key. My Lanier is not marked with that key. How do I find it. Thanks
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Hi, Deeni! I did Lanier for several years and was always told that Lanier....sm
would only work with/accept/interface with other Lanier products, that everything was proprietary, but that was a few years ago and do not know if anything there has changed, wish I was of more help! Have a good one!
Think you need someone on their end to re-assign the
s
Simply assign the job # to yourself...
and then hit next job.
Assign Key....Cindy
If you don't have an assign key, you may need to make one yourself. I can help you do this. Send me an email if you need further help.
You can assign any key combo you want to the
NextField command in the customize keyboard dialog box. You don't need a macro if you are inserting blank fields with Ctrl+F9. You can also assign a shortcut to the previous field command.
If they assign the worst dictators (sm)
to only you, you will have the same problem. The only files you will ever get will be the bad dictators. The favorites are making a living while you have to work twice as long to do the crap. It is so not worth it and I am glad I dumped services like that.
She's asking for advice, not someone to assign blame...
I really don't see how your post is going to help her find a solution to her problem. It is easy to stand up on a pedistal and point out other people's mistakes, but we've all made them. She needs advice on how to fix her situation, and "assigning blame" is just rediculous. I can't believe this thread even went in that direction.
I also don't think that it is right to blame someone for their spouse's actions. It is his fault for acting that way, not hers for marrying him.
I use / and record a macro which I assign
to an F key. Then I put / wherever in the template I need to input.
So moving around is as simple as pushing the F2 key as many times as needed...
I also use the macro record and assign to an F key functions like block and copy. Then if you have to move a whole section of words to another page, it's one key to block and copy and one click of the mouse to paste and you're done.
Most companies assign a point value for each
type of error and used these points to calculate your accuracy. My current company reviews approximatly 200 lines of transciption every quarter. Then there is a calculation of error points divided by line count, then they subtract that from 1, and multiply by 100.
Example - 3 points/200 lines equals 0.015.
1 - 0.015 = 0.0985
therefore accuracy is 98.5%.
Most companies I have worked for require 98% accuracy.
Our error points range from 2.00 (MAJOR) to 0.25 (minor).
Thanks very much, Pebbles. What functions do you assign to them?
nm
They assign harder ESLs to slow you down.
consuming to type very difficult dictators. In the long run you're make less money per hour. What the poster means, I think, is they want the work done and don't care if you struggle for hours or all day on ESLs.
Assign shortcut keys to macro Wordperfect?
I have to switch to Wordperfect after working in MS Word for 7 years. I have figured out how to record a macro, but how do you assign a shortcut key to it?
What I am wanting to do is jump to the next * in my reports because that is how I move from heading to heading.
The help section in WP just confused me
Any help is wonderful
Thanks
Focus Infomatics - they assign work or you pick from database
I wanted to know from anyone who works at Focus if you are able to download work when you want to or is it assigned to you? I thought I heard that you can go onto the site and grab dictations when you wanted to instead of being assigned.
If anyone knows I would greatly appreciate !!
Lanier
Yes Transcend uses the voice writer on certain accounts. Just started using it.
Lanier VXP??
Anybody use Lanier VPX? I can't get my wav pedal to play these files. Any suggestions?
Lanier VXP
These can only be played with a Lanier footpedal. They have a proprietorial header on the voice file and cannot be opened without the appropriate footpedal.
I have a lanier - sm
I would like to know more too. Thanks.
lanier
Does anyone use a lanier voice writer and looking for extra work? Thanks!
lanier
I know this may be redundant, but try unplugging everything and then start over. I have had this happen and it corrected it. Good luck!
Lanier LX-219-1
Can someone tell me what the VVI board underneath the Lanier machine is used for?? Does the Lanier machine with the phone attachment work the same way even though it does not have that VVI board???
I NEED HELP with this Lanier LX-219-1
Please help...I am ready to pull out my hair....
I need to set up my Lanier LX-219-1 system into a vonage modem
and I am TOTALLY lost...have tried all kinds of different connections
to no avail....Any ideas or help would be greatly appreciated...
Thank you...
HELP WITH LANIER LX-230
My Lanier LX-230 will NOT turn on when I push on/off button  . I tried *99 1 to see which buttons are programmed, and the on/off button did not light up  . Does anyone know what (if there is one) the code is for on/off button for the LX-230. To check, pls. try *99 then 1 while your LX-230 is off, then push the on/off button once - the code should be displyed...PLEASE reply to me with the code.
WOULD APPRECIATE YOUR HELP!!! 
Lanier
Lanier
If you use a calling card to dial into the hospital system using a Lanier, do your phone card minutes start to decrease immediately or only when you have the foot pedal down and are listening to the dictation? I hope this question makes sense? Tx
lanier
 On mine assign job is on the right side 5th one down - good luck!
IC Lanier
Check out MDI-MD.
Could someone tell me what a Lanier is.
I know I heard of it but not sure exactly what it is.
Lanier
It is a device that hooks into a phone line and you hook in your headphones and receive the dictation through there. Expensive peice of equipment. You have to dial into where ever your dictation is coming from. Does that help you at all?
I currently use it.
Lanier
Looking for an affordable digital system that would allow at least 4 people to dictate at the same time. Since they dial into the server with Lanier, is it possible for more than one person to be dictating at the same time? Would you need more than one phone line to allow for this? (Not sure if this system would allow for that or not). Any suggestions?
Thanks.
lanier
if you know job #, use the assign by job # key and reassign it to yourself. if you don't have that key, holler and I'll give you programming directions.
lanier
Try unplugging the phone lines from the modem (flat box) for about 10 minutes and then plug back in.
I need some help. I have a Lanier LX-219-1 with VTI. sm
I need a terminal block, power source and pedal. Can anyone tell me where I can get these. I have checked Executive Communications and they have them new. I would like to buy used if at all possible. Thanks!
Lanier P-145
Hello,
Does anyone know how to use the Lanier P-145(An old telephone 4 tape recording system)? Or does anyone know of a manual I can get my hands on? I just purchased a used one and I have tried everything and I can not get it to work!!! It does power on, but I am not sure if I am hooking everything up correctly.
Thank you very much.
Kimberly
Lanier
Agree. Lanier the best, but expensive. $600-700 for mine 12 years ago. Lasts forever, and you can spend the same $600-700 on cheaper models that will need to be replaced with new on a regular basis. Have tried Olympus, Panasonic, Sony - all lasted less than a year.
Lanier 219
Any one here know ths machine like the back of their hand? I have a few questions about functions of some of the keys.
Lanier
Sometimes they get sensitive and can do that, or also not give a full visual read-out in the window. When that happens, the tech tells us to fully power it down, totally unplug from its power source (from the wall, etc.) and let it sit for a full 5 minutes. This cools the unit down and since they are preprogramed which also includes programming of your footpedal, this allows the preprogramming to come back to its original state. Mine does stuff like that about every month or so. Most of them are pretty old. Also, you may have to get technical support if powering down does not work, to check your pedal settings. Hope this helps. I know these "old dinosaurs" get fussy sometimes.
Lanier
I am trying to find out what are the advantages/disadvantages of Lanier versus other platforms?
Harder/easier?
Outdated/up-to-date?
Lanier is the best
Any transcription product with Lanier on the name is #1 in my book.
Lanier
Lanier is one of the oldest, slowest, clunkiest systems around. I actually quit a job that was paying me 11 cpl on Lanier and took one for 9-3/4 on WAV and am making waaaay more on the WAV account. Lanier stinks.
Lanier help
I need the command prompts to use to access a Lanier system with non-Lanier equipment.
I access 2 other Lanier systems with the same equipment with NO problem at all. But this one is recognizing me as a "dictator" and not a "transcriber".
The prompts I do have, don't work. They are "call in, wait for beep, enter #6" I should hear "welcome" then enter my ID and should be good to go.
I've spent almost 3 hours searching for the solution on the internet and I need help fast. There are a ton of jobs waiting for me on this new system - so I'm losing $$$
thanks in advance for any help or suggestions,
Lanier
Is it possible to get Lanier voice files with anything other than a Lanier? I tried calling in on a Dictaphone, but it doesn't work. Seems like I remember someone posting about this, but I can't remember how she said it was done.
Thanks.
Lanier
End
Lanier
Good morning grasshopper... luv that name LOL
Thanks so much. Other than the color being black, it looks the same as my old faithful friend that was white or beige, but not black. I will try it. Thanks again...happy listening and typing to ya grasshopper.
Lanier
Good morning grasshopper... luv that name LOL
Thanks so much. Other than the color being black, it looks the same as my old faithful friend that was white or beige, but not black. I will try it. Thanks again...happy listening and typing to ya grasshopper.
Questions on Lanier 219 or 230
Could some MTs that use either of these systems please email me. I have a ton of questions concerning these machines and don't know where to look. Looking at working on an account that requires one of these machines and have been looking on ebay. Asked a few questions to one seller and I don't think he knows what he has. Any help would be really appreciated.
Tabatha in Charleston, SC
Lanier.....TransNet???
Hi Everyone!
Do you know if Lanier makes a sofware package similar to TransNet in which you can sign onto their system, download your voice files, and then sign off? If so, what is the name of that software?
Thanks!!!
Lanier hook up
I purchased a Lanier 230 and come to find out it did not come with the required cables to hook this stupid thing up. I got the base unit with large display, the power supply, the foot pedal, and the VTI but no cables. Can someone tell me what cables I need and how to plug it in so it will run properly? The only thing that came with it is the quick check brochure on how to program it. Nothing is mentioned on hook up.
Thank you in advance everyone. I would like to get to work on an account but don't even know how to get started. I figured posting here would get a quicker response. I don't want to go bald... hehe
Vonage and Lanier? sm
I have used Vonage in the past with a C-phone. Will it work as smoothly with a Lanier system?
I have had no problems using it with my Lanier.
x
Lanier Headset
Does anyone know where I can get a good price on a Lanier Stethoscope style headset (metal) - LX-10-35??? I have found these for $70, but maybe you might know of a better deal. THANKS....
lanier system sm
Please help. Our Transcriptionist left abruptly, and we are needing to acess the files to pull a medical report. We have the job in que, but we are not able to get any further. Can someone walk us through getting this thing typed.
|
