Yes, 65-character line is standard. You
Posted By: sm on 2009-02-10
In Reply to: line count and pay - meg
were lucky if being paid by the line still, including blank lines.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Quick question! Is 10 cpl with benefits at 74 character line better than 9 cpl at 65 character line?
Thanks
$.06 gross line / .70 = approximately $.0857 cents per 65 character line.
A gross line is anything on a line versus 65 gross characters per net line the other way. You make more money working for the gross line than for the 65 gross character line, as long as the line rate's OK.
Yes if gross line or 65 character line with spaces....Good Deal!!! nm
x
What is the average line/hour for a 65 character line with spaces? NM
.
Curious, do most IC's usually charge by the gross line or 65 character line?
Thank you~
Gross line versus character line....Sm please
I am thinking of taking a job that pays by the gross line and not a 65-character line. I have never worked this way. Does this literally mean if there is one little word on a line you get paid for it? I have not pinned her down on a line rate but I am just thinking I am going to be comparing apples to oranges and am wondering how to accomplish that.
Thanks for any help!
But that's a GROSS line, not a 65 character line.
So a newbie would have no problem at all hitting 150 lines per hour. A gross line is any line with a printed character on it.
Which is better? Gross line or 65 character line? It's
nm
IC, by line, 68-72 character spaces/line
@
gross line and character line
I am an IC currently doing one doctor who pays me by the hour but I will be starting another doctor soon and he will be dictating differently so I was going to charge him per line. What is the difference of charging gross lines or per 65 character line?
Line padding is not using standard abbreviations and
11
not OP, but what is standard font for gross line that most are using? sm
how would you go about it if the acct suddenly decreased font size from 12 to 10, but expects to pay the same? to me it is kinda like a decrease in my pay!!!! well it is technically because i am doing the same amount of work for less money and i am not happy.
The standard line the office gives me -grrr
Whenever I run out of work, I call the office. It's a waste of time. They have a standard answer which is "umm, umm, let me check, um, can you check back later in an hour?" Which later became "um, um, let me check, um can you check back in two hours?" If there is no work, can they not just say it's slow or there will likely not be much work today? I find this insulting. I never know how to respond since I can't really say to them "Liar, liar...." Lol. What would a better response be? I have stopped calling now. It's frustrating!
65-character line
Some of you have asked about what her lines consist of. Her lines are the same as mine--65-character line including spaces. I know she has some templates, but I just really think that she's exaggerating somewhat. Maybe she can hit 500-600, but I just don't see how anything higher than that is possible.
I do like a good challenge, though, so I'm going to get started with my Instant Text and see where my counts are a month or so from now.
Thanks for all of your replies!!
Is this a 65-character line?
Are you getting paid extra for bold, underlying, etc? Don't see how they figure 6 cpl with spaces equals 9 cpl unless they use a different character count for their lines.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
70 character line
Is there anybody out there in the entire universe who uses a 70-character line? I work at a hospital and we have to type 1100 lines a day on a 70-character line. Just curious.
I think it was based on 65-character line
All these formulas are confusing to me. I guess I need to ask some more questions. But, it's also an IC position, so that makes a difference doesn't it? Low pay for that? But, you are right, might be good experience.
What is "compensation 65-character line B/W"? nm
xx
Has anyone ever heard of B & W 65 character line?
What exactly is it? I know 65 characters, but is that without spaces or what??
65 gross character line
Could someone please explain to me how this works. I have been an MT for 7 years with the same company and have been paid by # of total bytes divided by 72 x 11 cents per line. I am now moving on to a new job which pays by the 65 gross character line and I'm not sure how to figure this out. Would appreciate any help. Thanks so much.
.08 cpl/65 character line for me right out of school.
/
I charge by 65-character line (sm)
My clinics have wanted 0.5-inch margins on the side. One of them wanted 10-point Times font. I think 65-character lines are fair for both parties.
___cents/65 character line
many transcriptionists get paid by the 65-character line
It is based on a 65-character line. sm
Headers/footers not included, spaces are.
My ES accounts always match that of Word when you take total characters including spaces and divide by 65.
EditScript software does not "control" spaces after a sentence. If you put 2, it will count 2, and if you put 1 it will count 1.
If a comes up ready for editing and you have to transcribe part of the report, you are paid at the editing line rate....unless you contact your account/supervisor and tell them you had to transcribe it. Depending on the company or hospital, they may or may not give you the transcription rate. That is probably a case-by-case basis or account-by-account basis.
The software can not determine you transcribe part of a report that was initially q'd for editing. If that dictator is voice recognized and he dictates one sentence, it becomes a document "Ready for Editing."
I hope this answers your questions.
I have been working with ES for about 7 years now. Absolutely enjoy working with this software program.
65 character line with spaces
TIA
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines, then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50. This is if it is a 65 character line including spaces.
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines (650 divided by 65), then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50.
8 cents per line 65 character
At 8 cents a line, to me, that should be just straight typing. No looking up - leaving a blank, and no struggling more than 1 time to make out what some doctor is mumbling. I am sorry, please don't tell me I have a bad attitude, but each and everyone of us is worth more than 8 cents a line. When we were paid (in the past) at a higher rate, it made up for the researching or trying to figure out what the doctor is saying. I had been out of this work for quite some time. Worked in a hospital for 22.00 an hour for years, worked part time for a service for about 9 cents a line - maybe 3 days a week for 4 hours a day. I did not pay attention that closely then as I had the hospital job. But now, working 8 hours (or more.) This is complete and total B.S. This p_____s me off so bad. But I have to do it in this economy, I am not in a position to do anything else. Everytime I try to really pick up my speed - as there was a time I could about 200 lines or more an hour. (I cannot do it anymore straight through 8 hours.) The QA people find something (a comma or whatever) and then I get nervious and slow way down. I know they have a job to do, but come on. There are some, but very few, doctors who care where a comma goes. Give me a break. It just infuriating for everyone that does this. I had a few doctors on my own accounts years back, but they would not pay on time, regularly, etc. Anyway I just had to vent.    
8 cents per line 65 character
At 8 cents a line, to me, that should be just straight typing. No looking up - leaving a blank, and no struggling more than 1 time to make out what some doctor is mumbling. I am sorry, please don't tell me I have a bad attitude, but each and everyone of us is worth more than 8 cents a line. When we were paid (in the past) at a higher rate, it made up for the researching or trying to figure out what the doctor is saying. I had been out of this work for quite some time. Worked in a hospital for 22.00 an hour for years, worked part time for a service for about 9 cents a line - maybe 3 days a week for 4 hours a day. I did not pay attention that closely then as I had the hospital job. But now, working 8 hours (or more.) This is complete and total B.S. This p_____s me off so bad. But I have to do it in this economy, I am not in a position to do anything else. Everytime I try to really pick up my speed - as there was a time I could about 200 lines or more an hour. (I cannot do it anymore straight through 8 hours.) The QA people find something (a comma or whatever) and then I get nervious and slow way down. I know they have a job to do, but come on. There are some, but very few, doctors who care where a comma goes. Give me a break. It just infuriating for everyone that does this. I had a few doctors on my own accounts years back, but they would not pay on time, regularly, etc. Anyway I just had to vent.
Courier 10 in Word is a 72 character line.
I was offered a position for the same as you mentioned and declined. I found a position that pays 10 cents a gross line with Courier 12, 65 character line.
You do need to remember, a line is a line when paid by gross line. So, if you initials are the only characters on a line, you are paid for that full line.
60 bytes equals a 60 character line. SM
If you have a document that equals 30,000 bytes you divide it by 60 to get 500 lines. If your line rate is 7 cpl, you have made approximately $35.
They used to do this years ago, before AAMT came out with the 65 character line standard. It all works out the same way eventually.
If the file is 10,000 KB and you are being paid by a 65 character line sm
divide 10,000 by 65 for your line count. This has been done for years.
11 cpl 55 character line, MTSO in California
Not everyone bills based ona 65-character line
An MT billing gross lines would stand to lose a great deal with a smaller font.
See, not so confusing.
How do I figure out what the character line count is--sm
if my document has 1,086 characters and 56 lines?
very substanard, and don't trust the character line.
x
You get paid 7.5 cents per 65 character line
I got this calculation by taking 10,000 for the character count including spaces and divided that by 5 and got 2000 (your word count). Then divided that by 1000 (you said you get paid per 1000 words), and got 2. I took 2 and times it by $5.75 and got $11.50. So for every 10,000 characters with spaces you get paid $11.50. To translate this to a 65 character line, I took 10,000 and divided it by 65, and that rounds to 154, divided by $11.50 and got 7.5 cents. This is decent, but I think you should ask for a raise if you have been with them for five years. Anywhere from 8 cpl to 10 cpl is the norm.
Need opinions. Is 8.5 cents a 65-character line.. sm
with spaces considered a fair rate for experienced MT? The work is for outpatient surgery centers and employee status. Miminal benefits are offered. I realize pay scale is often lower for non-acute care work but just not sure if that is a decent rate or not. Thanks for any input!
70 character line?? Hope you are paid well.
I get a 52 character line! Yippie.
I think it is a 65 character line without spaces but doesnt that mean you have to type a lot more to
get your lines in so you really arent making 9.5 cpl in fact right. I am not sure I understand when you dont get paid for spaces how much you really lose from that. Is it 20% a report or what percentage do you lose. If a report is 100 lines with spaces then what do you really get paid for on those 100 lines without spaces. I think that is what I mean. I am just tring to figure out how much longer you have to work to get your lines in at 1000 lines a day without spaces versus 1000 lines a day with spaces. Seems it would take quite a bit longer.
need help fast! Is 8 per 65 character line a "good' rate for an
MT with 10 years of exp? Was offered a position yesterday with a company and right now I make 9.25 - I know I will be losing, but right now I am on DQS and am so sloooowww.. What would you do? Not take it/ Tell them it's just too low? What?! 
Can a company "trick" you into paying you by the 65 character line by
stating 9 cents per 65 character line in writing, but you don't get paid for spaces? I heard rumors about this particular company that they don't pay for spaces and so I'm wondering about this. I suppose I could call and ask them, but was wondering about that. Thanks. What's been your experience about pay, if you have one?
Do the math. I am figuring on a 65 character line with spaces. SM
Getting credit for headers and footers or not, doesn't make much difference in the math. It's simply not possible. Even if you figure she gets 10 free lines per report for headers and footers, she still would have to type 300 lph for 10 hours a day and her hands would virtually never have to leave the keyboard!
Her pants are on fire!
I was referring to gross 65 character per line with spaces, sm
but again, it was very grueling, but possible. Granted, I had no life besides the keyboard.
Line rates gross versus 65-character
I recently had a call for family practice dictation and I offered 12 cents per line. Have always charged by the gross line and was charging 14 cents, which I thought was too high, so lowered it to 12 cents. However, the more I am reading I see that 65 character seems to be the way everything is getting billed. I also realize at 12 cents per line I lose a lot going to 65 character lines.
I also realize with family practice that they might have a lot of times where there is one or two words on a line and probably wouldn't be too happy about paying for gross lines.
I guess I'm looking for advice on charging. Is charging for gross lines unheard of anymore? I have already quoted the 12 cents, so that will have to be my charge. But as far as gross or 65 character, I haven't been asked that yet but would need to have that absolutely straight with them before starting. Any opinions would be greatly appreciated. I know I'm a little behind the times and am trying to catch up and stay competitive also.
Thanks!
Is 9 cpl, based on a 55 black character line good pay?
I think I explained that okay. Basically, a 55-character line, black, and pay is 9 cpl per line. I was not sure how this compared to 65-character line with spaces at 8 cpl etc. Any help out there?
Sorry- meant ඉ character line w/spaces!" - NM
.
what is the .065 cents per gross line equivalent to in 65 character lines?
Would it be about 8 cpl 65 characters or higher?
There is no such thing as a gross 65 character line! OMG! No wonder MTs are making peanuts SM
Some MTs can't even define a line.
A gross line is a any line with typewritten characters on it no matter how long or how short.
A 65 character line is just that - a line with 65 characters on it.
WOW!
|
