User Acct Control Setting

Hi there,

I have had a few problems with Vista like this.  I currently use Express Scribe with a USB foot pedal and its working fine for me.  I have had to tweak a few things though to make Vista work with most of my transcription software.  One thing I have noticed for most programs to work with Vista that I use for transcription, the user account control setting has to be turned off.  I keep it off all of the time now.  Here is a link on how to do that. 

http://windowshelp.microsoft.com/windows/en-us/help/58b3b879-924d-4e08-9358-c316055d3eae1033.mspx

Also, if that doesn't seem to work there is another Vista option I have used with a lot of success.  It is a software compatibility feature that enables software that worked fine with XP to be able to work fine on Vista.  Here is a link to that as well. 

http://windowshelp.microsoft.com/Windows/en-US/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

I hope all of this helps!!! 

• Question about ExpressScribe & Vista - swilson
  • Express Scribe - EL
  • User Acct Control Setting - Lisa

The messages you are viewing are archived/old.
To view latest messages and participate in discussions, select the boards given in left menu

My sewing machine has a knee control built into the side of the cabinet and I find this very comfortable.  I would like to somehow do the same with foot pedal I use for transcription.  Can figure out how to mount it, but having trouble adjusting it so the 3 pedals are not an issue.  ANyone done this or have any input? 

if you try to start an MT business right out of school.  Unfortunately, people take the college courses for MT just to find out that most employers do require experience.  There are companies that do hire newbies, but one must have attended an "approved" school.  It's not too late for you though.  I see you as having 3 options:

1. You attend an "approved" MT course/start over with schooling.

2. You apply everywhere, check your newspaper, keep looking.

3. You attempt to start up your own business and learn as you go, although I highly don't recommend this route. 

Good luck!

I'm at a loss - I cannot find a manual anywere about how to set up my Lanier LX-219 equipment.  I have the terminal block, module and the unit.  two phone plugs on the grey box, one phone plug on the back of the unit.  Does anyone know where I can find a manual on how to set up the equipment? Thanks in advance

If so, find out what others in your area are charging. If you think you should be paid more because you're doing pathology, then charge more.

If you're being offered a rate, then do you consider it to be enough? No one else can really answer those questions but you.

I've been doing some research on here and checking out various links and such regarding setting up my own accounts but am finding myself more confused than ever!   I've noticed some talking about things like mydocsonline, bytescribe, wav player, Olympus, etc., but how exactly do these work?  I'm assuming there is a system in their office or on their end and then I use some sort of system or connect with that to get jobs? How does this all work?

I've been looking into this and trying to understand how it works, as when I recently went to the ENT office they asked if might be looking for some work .  I didn't feel comfortable talking about it in depth because of my lack of understanding.  They are a mid-sized practice with 2 offices and probably less than 10 physicians.  Any info or advice anyone could offer would be greatly appreciated.  Please feel free to email me also if you'd like.

You purchased an IN-155 foot pedal for compatiblility with DVI VoiceWav.  (We have sold nearly 1,000 of these with zero returns.)

When you called our toll free 800 number for support we told you that the problem was not the pedal and was either the software you were using or your computer.  Reluctantly, we agreed to do an exchange for you.  (FYI, when your first pedal came back to us it worked absolutely perfectly and still does.  In fact it is plugged into the same computer I am typing on at this moment.  It has been tested daily since it came back with no problems).

Now, you voice incorrect information on MTStars.  Your problem is in your computer.   

Please feel free to call us yet again if this is not clear to you.

Tom Wilkes

President

Executive Communication Systems

(800) 644-9525, ext. 101

I have an older transcriber (DAC Model DA-125) and have had it for quite some time now.  I moved my office over the weekend and had to unplug the machine.  Well, my backspace has reset to practically nothing and I can't find my manual on how to reprogram the backspace.  Is there anyone else out there using this phone and if so, how to do reprogram it for the backspace length?

Thanks so much for your help.

Tabatha in Charleston

I will be starting a second job next week and need to use that companies computer.  I know I need a syslink router to enable them both to use our cable modem, but I know there is a box you can get so you can use one monitor and turn the dial to switch back and forth between computers.  Anyone know what this is called and where to get it?   Also, is there a way to use only one mouse and keyboard also, or will I have to have 2 keyboards and 2 mice on my desk?  (I have a small desk and am limited on space).  Thanks for all help!!

I used to do this about 8-10 years ago, but forgot how to do this.  Please post how to do this.  This is for Word 2002.

Thanks

for automatic numbering to the left margin by:

1) Open MS Word
2) Select Tools
3) Select Autocorrect
4) Click on the tab 'Autoformat as you type"
5) Make sure the box 'Automatic numberer lists' is checked (it's about the 8th box down)
6) Click on okay (otherwise your change wont take)

I hope this is what you meant.

if they just want people to quit.

for line numbering?  It keeps indenting 1-2-3,etc. to the first tab and I need the numbers along the left margin.  I went to <format>, <bullets and numbering>, <customize>, and changed the number position and alignment, and it lines everything up on the left margin. 

However, if I have another numbered section in the report, it goes back to the default setting, indenting to the first tab. 

Is there a way to change the default, or do I have to go through these steps for each numbered list? 

Thanks!

every night in a different motel, and with no laptop, either.  I just used whatever table they provided and setup my total PC system, and got the work done.  Not the usual situation, but it worked fine.  It sure was not a vacation, though, but a cross country move.  Had to stop by dark every night and get some sleep, get up a midnight to work 6 hours, then move on.  Made a lot of money, at least as much as usual.

Need to set up nurse practitioner dictator with Doc signature block, think I know how it should be set up but it's been awhile.  Any current examples or preferences of how anyone likes to do this?    Thanks. 

The above is a good recommendation.  I have a binder with the account specifics and when I first started with them I would bring it out, review what their specifics were and so on to refresh my memory.  Now after years of managing five accounts it is an automatic switch of font, margins, set-ups, etc.   After a time you will be doing the same but until then, just make a binder, cards or folder and prior to starting the account bring it out and refresh your memory and keep it handy to refer to when needed.   Good luck.  

Patti