Try hitting CONTROL and DOWN ARROW?NM
Posted By: yen2772 on 2005-07-02
In Reply to: Help! Windows turned sideways? - Dummy
NM
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
If in MS Word, sometimes hitting the "Undo" arrow (sm)
above can make something you didn't want go away. I've also discovered that if you are working online, like in email for example, hitting "Control" and the "Z" key at the same time works just like "undo". It's especially helpful for when you've just typed a long email, are just about to sign off, and you hit the wrong key and it DISAPPEARS! If you immediately STOP, don't touch anything else, and then hit "Control-Z", if you're online it SHOULD come back! :)
control alt up arrow
Hopefully should get you there. If not, keeping doing the control alt with the arrows and eventually it will turn the correct way. If it goes upside down, then do the control alt up arrow.
or control and left or right arrow.
I did that several times!
Green back arrow/forward arrow on toolbar. nm
.
Foot pedal control/knee control? (sm)
My sewing machine has a knee control built into the side of the cabinet and I find this very comfortable. I would like to somehow do the same with foot pedal I use for transcription. Can figure out how to mount it, but having trouble adjusting it so the 3 pedals are not an issue. ANyone done this or have any input?
Foot pedal control/knee control
Though I have not had experience with this type of modification, I have repaired numerous footpedals and have some information that may be helpful. Generally, the footpedal is comprised of the primary circuit board, the wiring to the computer, and the three switches for play, rewind, and fast forward. These switches are easily removed from the pedal with a screwdriver. With basic soldering, you can lengthen the wiring to each switch, or even replace them with different switches you can get at a local electronics store. With a little bit of creative engineering, you could mount some knee -controllable switches that could control the footpedal.
I use Control N to end a job - Control T is for when viewing an old report
Don't know what you are talking about
yep, control, control, control... that's the main
nm
Arrow
What does the arrow mean in front of a post?
You probably hit Contol-Alt-down arrow. nm
x
Got it - Ctrl+Alt+Up Arrow
xx
I also do VR but the arrow keys?
Maybe I am doing wrong but I do not use the arrow keys hardly at all. Why are you using these, are you supposed to? I think escription tells you not to use the mouse, well I hate to tell them but never have given that up. They say use hot keys, never have. Just too set in my ways to start at this late date. I never have any problems with arms, shoulders, on and on.
Arrow Keys
I use Dictaphone EXT and they told me not to use the mouse but to use the arrow keys to move around in the document.
Start>Control Panel>User Accounts>Turn User Account Control OFF
x
Try hitting the Esc key.
x
Hitting the numbers
I have to agree with Busy MT, Anon, and Endiqua. It doesn't matter how you arrive at verbatim as long as it is verbatim. I have a verbatim account typing op reports. I have set up a file with each doctor's name and a sample report, e.g., Dr. Smith, lap chole, appy, hernia repair. When Dr. Smith dictates, I cut and paste whatever procedure he is dictating into a new document and make any changes as he dictates. As someone said most doctors use the same phraseology in each report, making only minor changes during. For example, 5-0 nylon, instead of 5-0 nylon sutures. Just take out and add in without straight typing every single word. It's still verbatim. Using this system, my usual count is about 300-350 lph. I also use my expander extensively.
Obviously I am hitting a nerve somewhere
that you are taking offense to my posts. So which one is it, are you fat, ugly, have an acne problem or all of the above?
so I did what you said, I tried hitting cancel
and it the upgrade icon just sits on my taskbar......I will never get rid of it.....so I went back and disabled all updates....until tech tells me how to handle this....
thanks for helping though!!! *S* Much appreciated :)
It is just hitting the keyboard to put something in
dfzs
Hitting the wall
Hi fellow MTs:
Just wanting opinions. I find some days, my fingers/brain are really "on" with transcribing, but then I have other days, where reaching my line count is a struggle. Obviously, I'd prefer to all "on" days and I'm wondering if any of you have suggestions on being "on" more than off.
Thanks in advance and happy typing!
Hitting the wall
Thanks to my fellow MT's for these suggestions. I'll have to try the classical music.
Have a great day!
brain freeze. > what does this arrow mean? greater than? less than?
Try hitting the Alt + Shift buttons and see if that
/
I'm not sure I understand what you are saying by not hitting enter twice...Ty for your help! nm
x
You are hitting the Ctl button by accident..sm
happens to me too, until I figured out what I was doing.
I don't hate you at all. That's all I'm asking, is how you guys are hitting those high #s,
had never even thought of using VR for myself! That sounds really interesting...
This way works, too, but using the ;yo or ;py cuts down on hitting the spacebar
nn
Thanks for all your help. I did find it but can't get it to take effect after hitting apply so w
with it. If I remember I put my headphones behind my ears as well. I just don't always remember. But thanks again!!
I don't use the mouse. I use Cntl+end key to highlight a sentence.Shift and the arrow key will do
x
Shift right arrow - highlight the entire sentence and delete! Not sure there is a
ctrl key to do entire sentence, but I will look and get back to you.
Well - no. Shift arrow down will highlight my entire line and then delete.
Don't know what you are talking about - I never use F8 in Word.
Try ctrl+shift+left arrow to highlight the last word
then Alt + J to open AutoCorrect, type your Replace word, and tab to OK and hit the Enter key.
Make sure you don't have any extra spaces when you highlight.
trying hitting your Refresh button, maybe? (sounds like you're seeing an old
nm
I think hitting escape at the end does it, or make other shortcuts for the long
s
Hold down Ctrl and Shift and use right arrow to highlight one word at a time. sm
You can highlight noncontiguous words by holding down on Ctrl and selecting different words.
Ctrl/T is for terminating a job. What are you hitting those keys for while you're working? ExText
s
Just hit Alt+Shift+left arrow on line 1 and it will go to the left margin. Otherwise,
you need to use a numbered list style to do it every time. Each version is different, but you may already have a numbered list style in yours that stays at the left margin. Just assign a keyboard shortcut to that style.
You're hitting Alt+Ctrl+S. Hit Alt+Ctrl+C to get back.
x
Thank you.. you are right. I'm in control of what I do about this!
nm
Why do you let this man control you? (sm)
Confront him about his actions. Do not hold back. If it continues, then discuss the problem with all your family members. You are letting him run your life. Then let your mother et AL decide whether they want to see you on your terms or if they prefer to have no relationship.
All this animosity will eat your alive. Get it off your chest and you do not need a counselor to do it. Just be yourself and be honest and upfront with him.
Control-B - nm
x
cannot control what others do
Personally I would just stop having anything to do with her. I would tell your husband why and no one else. Just stop doing anything with her, talking to her, etc. If you have kids, unless the kids are asking to see her, carry on with your life. And don't say it isn't that easy. It is. And what she does is what she does. What you do is what you do. What you and your husband have together is outside of what she does. Keep it simple. Don't say anything negative about her. I know you have hurt but you said you worked though it. You can do that with this too. Be strong.
The key to all of this is control+K
which allows the next keystroke to be entered as the command, in your case hit control B. When the box comes up, make sure the control box is checked, not shift or Alt, and then click okay. repeat at end of phrase.
Out of control
Although working from home is great - I have always felt as if the company that I worked for was more in control of my life than I was. Telling me when I had to have something done - even though they never live up to their own standards. One very well-thought of company on this board is just that way - I have QA sitting out there from the weekend and it hasn't been checked yet, but once it is, they will expect me to have it done in 30 minutes and to the hospital - I'm ready to give up this profession or vocation or whatever anyone wants to call it.
Control key. nm
x
Control T
Some EXText users have the ability to reveiw old jobs--say you want to look at a physical exam for the dictator you're working on or you want to verify a dosage for a drug on a patient you're working . You can Control/S, then in the screen that pops up you can chose by date, trans ID, provider name, patient name, etc. In the documents that come up based on the parameters that you entered, you can select one of those documents. It's also a way to review what QA filled for any blanks you might have had. When you are finished reviewing, you Control/T to get out of that document and your working document pops back up. Working documents you Control/N. Reviewing documents (read only), Control/T.
Control
Hang in there....it will improve as time goes on.
Control
I am actively searching for a new company. This is a no-win situation.
I don't know nor do I have control over the MT
community. What I can control is my own career. Other MTs have to take control of their careers, too. IMHO, to work for an MTSO/get paid by production as a newbie MT is career suicide. I never made less than, equal to or close to a housekeeper as a newbie. I started as a medical-legal word processor of sorts - self-taught - took classes here and there and the rest is history. My advice to new MTs is to get a job as a file clerk or other admin in a hospital or med group and work your way into a MT clerk and then MT position. You already have your foot in the door by the fact that you are an employee of the hospital or med group 
And we also have a bit more control over the
.
...now. It's already too big to control, and not
s
|
