Sorry- meant ඉ character line w/spaces!" - NM
Posted By: GotTheTShirtShirt on 2009-06-09
In Reply to: Aria Platform - anyone use this piece of junk? - GotTheTShirt
.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Yes if gross line or 65 character line with spaces....Good Deal!!! nm
x
What is the average line/hour for a 65 character line with spaces? NM
.
65 character line with spaces
TIA
I think it is a 65 character line without spaces but doesnt that mean you have to type a lot more to
get your lines in so you really arent making 9.5 cpl in fact right. I am not sure I understand when you dont get paid for spaces how much you really lose from that. Is it 20% a report or what percentage do you lose. If a report is 100 lines with spaces then what do you really get paid for on those 100 lines without spaces. I think that is what I mean. I am just tring to figure out how much longer you have to work to get your lines in at 1000 lines a day without spaces versus 1000 lines a day with spaces. Seems it would take quite a bit longer.
Do the math. I am figuring on a 65 character line with spaces. SM
Getting credit for headers and footers or not, doesn't make much difference in the math. It's simply not possible. Even if you figure she gets 10 free lines per report for headers and footers, she still would have to type 300 lph for 10 hours a day and her hands would virtually never have to leave the keyboard!
Her pants are on fire!
I was referring to gross 65 character per line with spaces, sm
but again, it was very grueling, but possible. Granted, I had no life besides the keyboard.
What the heck does getting paid by a 55 black character line?? Does this mean without spaces and doe
You just never know if this is a trick to somehow rip you off of lines. I am just very skeptic of it since I have never heard of anyone using this formula before.
depends if includes headers, spaces, one or the other, character line, etc.
nm
IC, by line, 68-72 character spaces/line
@
Quick question! Is 10 cpl with benefits at 74 character line better than 9 cpl at 65 character line?
Thanks
I make 9 w/o spaces but I get every character - sm
on the page, regardless if I typed it or not, plus a cover page that is macro'd. However w/o the spaces I'd say I am out an average of $200 a month. Since you will not get headers/footers, it will probably be a little more. I try to template up as much as I can but only a handful of docs actually say the same thing every time. I figured it out once and I think the 9 w/o spaces equaled 7.75 with spaces. I get fairly regular raises though and with any luck get bumped up to .10 in the Spring (at least I am going to ask for it). You don't say how much experience you have, but if you do not have much I would go for it. I have been looking on an off for a while for a new job but am very limited as I have dialup (no DSL here, and most companies don't want satellite), so I am between a rock and a hard place. Any jobs I do find with dialup offer .07 cpl, unless it is real easy work I don't want to go that low. Make a list of pros and cons and go from there.
Why would a company pay by character when they also pay for spaces?
nm
My line including spaces is 65 characters. I've heard that not counting spaces
takes away over 35% of your line count. I believe it too because you have at least 15 or so spaces on each line that you type. Use your first sentence up top as an example; you had 77 char and 21 spaces - in that line that would be a little less than 30% of your characters that you didn't get paid for. I don't think it's worth it and wouldn't want to work without getting credit for my spaces.
In Word, take the character count (with spaces) divided by 65... SM
that will give you an accurate line count, but you'll have to write the character count down for each and every report before you finish and send the report. I put a button on my tool bar that I just clicked to bring up the document counts and then I just kept a log that wrote down job number and character count for each report. Then at the end of the day just add up the characters divide by 65 and you've got your line count for the day. Kind of a hassle, but worth it in the long run.
0.12/cpl, macros count as 2 characters, backspacing is given to us as 1 character. No spaces. Aut
dd
No, it is 65 character lines including spaces. The only canned text is my own.
I get mostly the same dictators on the same account every day. I do have carpal tunnel starting, so, gotta get it while I can.
$.06 gross line / .70 = approximately $.0857 cents per 65 character line.
A gross line is anything on a line versus 65 gross characters per net line the other way. You make more money working for the gross line than for the 65 gross character line, as long as the line rate's OK.
Curious, do most IC's usually charge by the gross line or 65 character line?
Thank you~
Gross line versus character line....Sm please
I am thinking of taking a job that pays by the gross line and not a 65-character line. I have never worked this way. Does this literally mean if there is one little word on a line you get paid for it? I have not pinned her down on a line rate but I am just thinking I am going to be comparing apples to oranges and am wondering how to accomplish that.
Thanks for any help!
But that's a GROSS line, not a 65 character line.
So a newbie would have no problem at all hitting 150 lines per hour. A gross line is any line with a printed character on it.
Which is better? Gross line or 65 character line? It's
nm
gross line and character line
I am an IC currently doing one doctor who pays me by the hour but I will be starting another doctor soon and he will be dictating differently so I was going to charge him per line. What is the difference of charging gross lines or per 65 character line?
65-character line
Some of you have asked about what her lines consist of. Her lines are the same as mine--65-character line including spaces. I know she has some templates, but I just really think that she's exaggerating somewhat. Maybe she can hit 500-600, but I just don't see how anything higher than that is possible.
I do like a good challenge, though, so I'm going to get started with my Instant Text and see where my counts are a month or so from now.
Thanks for all of your replies!!
Is this a 65-character line?
Are you getting paid extra for bold, underlying, etc? Don't see how they figure 6 cpl with spaces equals 9 cpl unless they use a different character count for their lines.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
70 character line
Is there anybody out there in the entire universe who uses a 70-character line? I work at a hospital and we have to type 1100 lines a day on a 70-character line. Just curious.
I think it was based on 65-character line
All these formulas are confusing to me. I guess I need to ask some more questions. But, it's also an IC position, so that makes a difference doesn't it? Low pay for that? But, you are right, might be good experience.
What is "compensation 65-character line B/W"? nm
xx
Has anyone ever heard of B & W 65 character line?
What exactly is it? I know 65 characters, but is that without spaces or what??
65 gross character line
Could someone please explain to me how this works. I have been an MT for 7 years with the same company and have been paid by # of total bytes divided by 72 x 11 cents per line. I am now moving on to a new job which pays by the 65 gross character line and I'm not sure how to figure this out. Would appreciate any help. Thanks so much.
.08 cpl/65 character line for me right out of school.
/
I charge by 65-character line (sm)
My clinics have wanted 0.5-inch margins on the side. One of them wanted 10-point Times font. I think 65-character lines are fair for both parties.
___cents/65 character line
many transcriptionists get paid by the 65-character line
It is based on a 65-character line. sm
Headers/footers not included, spaces are.
My ES accounts always match that of Word when you take total characters including spaces and divide by 65.
EditScript software does not "control" spaces after a sentence. If you put 2, it will count 2, and if you put 1 it will count 1.
If a comes up ready for editing and you have to transcribe part of the report, you are paid at the editing line rate....unless you contact your account/supervisor and tell them you had to transcribe it. Depending on the company or hospital, they may or may not give you the transcription rate. That is probably a case-by-case basis or account-by-account basis.
The software can not determine you transcribe part of a report that was initially q'd for editing. If that dictator is voice recognized and he dictates one sentence, it becomes a document "Ready for Editing."
I hope this answers your questions.
I have been working with ES for about 7 years now. Absolutely enjoy working with this software program.
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines, then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50. This is if it is a 65 character line including spaces.
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines (650 divided by 65), then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50.
Yes, 65-character line is standard. You
were lucky if being paid by the line still, including blank lines.
8 cents per line 65 character
At 8 cents a line, to me, that should be just straight typing. No looking up - leaving a blank, and no struggling more than 1 time to make out what some doctor is mumbling. I am sorry, please don't tell me I have a bad attitude, but each and everyone of us is worth more than 8 cents a line. When we were paid (in the past) at a higher rate, it made up for the researching or trying to figure out what the doctor is saying. I had been out of this work for quite some time. Worked in a hospital for 22.00 an hour for years, worked part time for a service for about 9 cents a line - maybe 3 days a week for 4 hours a day. I did not pay attention that closely then as I had the hospital job. But now, working 8 hours (or more.) This is complete and total B.S. This p_____s me off so bad. But I have to do it in this economy, I am not in a position to do anything else. Everytime I try to really pick up my speed - as there was a time I could about 200 lines or more an hour. (I cannot do it anymore straight through 8 hours.) The QA people find something (a comma or whatever) and then I get nervious and slow way down. I know they have a job to do, but come on. There are some, but very few, doctors who care where a comma goes. Give me a break. It just infuriating for everyone that does this. I had a few doctors on my own accounts years back, but they would not pay on time, regularly, etc. Anyway I just had to vent.    
8 cents per line 65 character
At 8 cents a line, to me, that should be just straight typing. No looking up - leaving a blank, and no struggling more than 1 time to make out what some doctor is mumbling. I am sorry, please don't tell me I have a bad attitude, but each and everyone of us is worth more than 8 cents a line. When we were paid (in the past) at a higher rate, it made up for the researching or trying to figure out what the doctor is saying. I had been out of this work for quite some time. Worked in a hospital for 22.00 an hour for years, worked part time for a service for about 9 cents a line - maybe 3 days a week for 4 hours a day. I did not pay attention that closely then as I had the hospital job. But now, working 8 hours (or more.) This is complete and total B.S. This p_____s me off so bad. But I have to do it in this economy, I am not in a position to do anything else. Everytime I try to really pick up my speed - as there was a time I could about 200 lines or more an hour. (I cannot do it anymore straight through 8 hours.) The QA people find something (a comma or whatever) and then I get nervious and slow way down. I know they have a job to do, but come on. There are some, but very few, doctors who care where a comma goes. Give me a break. It just infuriating for everyone that does this. I had a few doctors on my own accounts years back, but they would not pay on time, regularly, etc. Anyway I just had to vent.
Courier 10 in Word is a 72 character line.
I was offered a position for the same as you mentioned and declined. I found a position that pays 10 cents a gross line with Courier 12, 65 character line.
You do need to remember, a line is a line when paid by gross line. So, if you initials are the only characters on a line, you are paid for that full line.
60 bytes equals a 60 character line. SM
If you have a document that equals 30,000 bytes you divide it by 60 to get 500 lines. If your line rate is 7 cpl, you have made approximately $35.
They used to do this years ago, before AAMT came out with the 65 character line standard. It all works out the same way eventually.
If the file is 10,000 KB and you are being paid by a 65 character line sm
divide 10,000 by 65 for your line count. This has been done for years.
11 cpl 55 character line, MTSO in California
Not everyone bills based ona 65-character line
An MT billing gross lines would stand to lose a great deal with a smaller font.
See, not so confusing.
How do I figure out what the character line count is--sm
if my document has 1,086 characters and 56 lines?
very substanard, and don't trust the character line.
x
You get paid 7.5 cents per 65 character line
I got this calculation by taking 10,000 for the character count including spaces and divided that by 5 and got 2000 (your word count). Then divided that by 1000 (you said you get paid per 1000 words), and got 2. I took 2 and times it by $5.75 and got $11.50. So for every 10,000 characters with spaces you get paid $11.50. To translate this to a 65 character line, I took 10,000 and divided it by 65, and that rounds to 154, divided by $11.50 and got 7.5 cents. This is decent, but I think you should ask for a raise if you have been with them for five years. Anywhere from 8 cpl to 10 cpl is the norm.
Need opinions. Is 8.5 cents a 65-character line.. sm
with spaces considered a fair rate for experienced MT? The work is for outpatient surgery centers and employee status. Miminal benefits are offered. I realize pay scale is often lower for non-acute care work but just not sure if that is a decent rate or not. Thanks for any input!
70 character line?? Hope you are paid well.
I get a 52 character line! Yippie.
need help fast! Is 8 per 65 character line a "good' rate for an
MT with 10 years of exp? Was offered a position yesterday with a company and right now I make 9.25 - I know I will be losing, but right now I am on DQS and am so sloooowww.. What would you do? Not take it/ Tell them it's just too low? What?! 
|
