RE: I would do a "print screen" on each report nd save
Posted By: I would not trust them! on 2008-08-12
In Reply to: IC and line count - icmt
to Word Pad. Then you will be able to compare your count to their count.
Complete Discussion Below:  marks the location of current message within thread
- IC and line count - icmt
- RE: I would do a "print screen" on each report nd save - I would not trust them!
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
You can do a screen shot and save to a document...sm
then dispute the line count paid to you. Why would you settle for less than what you have actually transcribed? I check mine on a daily basis and write it down, then do a total payroll line count - that's the one I do a screen shot of so that I can make sure to get paid for what I've done. Good luck!
I would do a print screen on every report to verify that the line count is correct. nm
Change your view to "print layout".
That should do it. If you need additional help, email me. I'm pretty good with Word.
EXText Word Client - blank screen everytime I give "ok" in the DIS screen
I am using EXText Word Client software with Transnet. I am getting a blank screen everytime I give "ok" in the DIS screen (patient details info screen). I have uninstalled and reinstalled the software an upgraded but still errors out the same way. Are there any EXtexters who could help?
EXText Word Client - blank screen everytime I give "ok" in the DIS screen
I am using EXText Word Client software with Transnet. I am getting a blank screen everytime I give "ok" in the DIS screen (patient details info screen). I have uninstalled and reinstalled the software an upgraded but still errors out the same way. Are there any EXtexters who could help?
EXText word client blank screen everytime I give ok in DIS screen
Thanks your suggestion was very valuable. At a specified time (which the technical side say, when the net speed is very good), it is working without a problem at all (whereas this was half working and half not working before even at this time), but other times, still the same problem exists.
Actually the blank screen comes every time I give "ok" in the DIS screen (patient details info screen).
If you google "print folder list" you'll find a lot to choose from.
Example: http://no-nonsense-software.com/printfolder/
Screen Resolution/Font/Screen Percentage
My eyes are tired all the time. I usually have my monitor set at 800 x 600 pixels and use Bookman at 10 font in Word at 111% in the normal layout. What might be a better viewing screen setting to use?
I did try to save the file first but it wouldn't even let me save it.
.
You do not need the 1099. You just need to report the income. Report the company/person ...sm
to the IRS for not sending out the 1099.
I charge the same amount for a "normal" report as for any other report.
You still have to listen to the dictation and change anything that's different. I had one woman try to pull this on me. She'd dictate, "Just pull up my normal, but change this, change that, switch that around, move that, add this, delete that, and change the other." Then she'd only want to pay me what equated to $.03 per line. She wanted 1:1 on her dictation to transcription ratios. I told her to take her cheap account down the road because I'm worth more than that.
Oh, a report just came in. A report actually just slid in, can you believe it. Hip Hip Hooray. I
had better get that sucker typed before it gets out of ONE MINUTE TAT.
If you are careful with putting the correct report in the correct report shell and patient, you will
not have any problems. I only take away this option when someone is careless. There can be NO room for error on this. One mistake can be very serious. Many do it well though, so just double check and you will be fine.
I am getting the LCD screen. Do you like that screen.
:
screen
yep! Only had mine for about two months now and just love it. sooo much more room on my desk, and alot less glare.
I'm getting the same screen here and I need a job!! :) nm
nm
PS - Your screen name is the BEST.
We need more posters like you on this board... two thumbs up! :)
TES Screen is ...
the screen where the patient data is entered (name, DOB, acct #, ref. physician, etc.)
Anyone have a similar problem as posted above?
save it for another day
Yes, I agree with you, but apparently some people are unable to NOT be rude, so I have decided to give it up for today..... it just takes to much energy to argue. Not to mention, they can't even grasp the fact that you and I are two DIFFERENT PEOPLE................. so, there ya go.
oh, and bye the bye, in the churches I grew up in Amen was a form of agreement.
Can you tell me how you save your
that it cannot be saved. I'm sure this is a no brainer and I'm making it worse by thinking too much about it - any help would be appreciated.
Will somebody save me?
 Hi, deep trouble here. Reorganized under my desk (bad mistake, I guess, although the cords are nice and lined up now) and when I plugged the C-phone back in it went crazy and now I get dial tone from handset, but that is all. Can't find the manual after searching for hours. Anyone know what might be wrong or if I need to reprogram this thing? I went to their website, but it is down at the place where you sign in. Of course! Can't work, so need as much help as I can get. Thanks in advance.
Nana 
Even if you save yourself a
template, you still listen to the entire report and change the words as necessary. You don't leave it if that's not how it's dictated. Setting up your own template saves time & Keystrokes because a lot of times you will have entire sentences or sections the same, but you still must ALWAYS listen to the entire report & make any and all changes.
In addition to OPs, I also make macros for PEs, ROSs, etc., for dictators who usually are repetitive.
Screen shot
Can someone tell me how to make a screen shot of whatever is on my computer screen?  Sometimes it helps to have a screen shot when contacting the IT department for help.
Lagging screen
Have already checked with them. I have my own new computer and don't use any of theirs.
DQS demo screen
I find that I write down the MR# or billing number, then just search using the patients name and can get a whole slew of choices.
You can try just the first 2 letters of the last name if not sure on spelling.
When you have the right choice, the MR# will pull in when you pull the right name in. HTH
demo screen
same here, too. and to think we don't get paid for that either!!
Full screen
No, it's not in full screen mode. You're right, though, I was hitting Ctl not Alt for a while. Have tried Alt V and nothing happens.
I did find something in MS Help online, but it requires that I start the machine in Safe Mode. The PC locks up now when I get to the dos program where I would select Safe Mode.
Thanks for all the help. So far I've tried all the suggestions and nothing has worked yet.
I'm about ready to light a match to this machine, I tell ya!!
screen prior
I would say something like I would like to ask ome questions prior to sending in a resume and testing as I feel this saves time on both sides. A concern is: _____ and also the low rates offered and the formula used to figure the payrate. Get it out of the way, don't waste time, some are down to 4 and 5 cents/line for MTs. Less than 10 is not acceptable and even with that, it sure is not good by the time you figure the hourly rate and just what skill is expected/given and under what terms, I have seen 99.5 accuracy expected. When these bad terms are turned down by the MTs it will not turn around.
Cleaning your screen
Never use windex it will mess up the screen and good. Water is okay, but not the best. I use Klear screen. You can order it on e-bay fairly cheep. It is recommended by all computer industries for both laptops and regular desktop screens. It is awesome.
If it is typing on the screen, then it should not
be a problem, just the same as if you use AutoCorrect or an abreviation expander. You are NOT after all bringing in text from another word processer...you are creating text on the screen you see.
If you look at the bar on the bottom of your screen SM
while having your mouse pointer over the image in the email, you will notice it is a "snapshot" of an ebay page and the buttons that you would normally click on are part of the picture. Basically clicking anywhere on that image will take you to the site listed in the information bar at the bottom of your screen It is always an aol hometown site in the scam ones I get. I just got an ebay one recently where it had similar language- basically harassing me to pay for something. I think it is written that way to startle you into clicking right away to take care of "the problem".
If the Chinese government can go after dissidents through Yahoo, why can we not get these scam artists that set up their scam sites through AOL? I know, I know, that was just a rhetorical question.
Drug Screen
Well, I thought that you listed drugs you too also, but they said it didn't matter. If anything at all came up they wouldn't let me have the job. I even showed them the bottle in my purse, and they said it just didn't matter, legal drugs or otherwise. Oh well, lesson learned I guess. Thanks for response.
kind of screen
geez, i have no idea. It feels like glass. Its just a clunky old-style monitor.
What screen colors do you use?
What screen colors are easiest on your eyes? I read somewhere that shades of lavender/purple actually caused the least eye strain. (I'm assuming no color blindness!) I've been using black text on white background for a long time, but I'm getting old, the bifocals slip on my face, and I'm trying new colors. Just wondering what colors most MTs use to prevent eye strain.
screen color
Is that the color the company you work for gave you? Tech support should be able to change it for you. Mine is blue with white print. Much easier on the eyes. I had one where the preview page was yellow, gosh awful yellow!
I have a flat screen already, but sm
it is small. I would like to go larger. Thanks for posting. This answers my questions as well. Didn't know if bigger is always better, but sounds like it works well for others.
Yes! Yes! Yes! Flat screen!
I have a 19 inch flat screen and love it! Once you get a flat screen you will never go back! Also the weight difference betwen them is huge! To can pick up that flat screen and move it around anywhere you like. Would highly recommend. PS. I have a Westinghouse 19 inch, and I would recommend a 19 to 21 incher!
Well, it may not be on the MR, but it is on the demo screen (at least for me) SM
where I work.
it is usually because they used it in a smaller screen
Open it up, click on the large square in the upper right hand corner next to the X for closing it, so that it is enlarged. Then close it, and it should open to the full screen the next time. Most all software will open in the same size that it was closed in the last time. Hope this helps.
Screen blank for me too.
nm
screen size
Does anyone know how to change the size of your screen size so the text will larger. I saw this a couple weeks ago on how to do it and forget to write it down. I know it was either alt or control and some other key.
Thanks!!
Screen in 2 parts, need only 1
let me state over as maybe someone knows how to get out.
2 computers one screen
How would I run 2 computers on one screen? TIA.
okay, I did (screen shot) and I sent it.....
to the person who had responded to my original question and asked her to address this. Thank you for providing the link. It will be interesting to see how they respond to this one. I am so naive; I expect everyone to play fair and be nice, and obviously they don't. Where she makes the comment about "imposters here" and she would rather have someone else qualified in India handle her record, I told her I think their focus should be on making sure everyone here IS qualified and not making sure the Indian workers are qualified. Like I said, it will be interesting to see how they respond. I will keep you posted on it if people are interested in hearing their answer.
flat screen
I have a 19" flat screen monitor and I love it to pieces !
Screen colors
Changing screen colors through the control panel will not change anything on any other computer. That's just nonsense.
Your coworkers sound as though they changed the font color and background color ON THE DOCUMENT itself using the formatting commands. That's the only way a change would transfer with the document itself.
Changing it with Barb's method will give you a glaring blue background with white text. You can't get aqua that way.
You can change your colors in Windows. Start, Control Panel, Display, then choose a color scheme in Desktop. Get as close as you can with one of the ones provided, then adjust the color of the background. You can invent your own if you're not happy with any you see there.
Software comes with built-in instructions now. Just click "help" on the toolbar.
screen magnifiers
Does anyone use a screen magnifier? I'd like to know if they work well and which one is the best. I am using bayscribe/radnet. Changing font in windows doesn't work for radnet. Would appreciate any help.
blurry screen
A note about the blurry screen...my friend has a monitor like that and I definitely think its the monitor! But....what did help some is to decrease the width of the screen itself. Basically, there'll be a black line about an inch in diameter on either side of the screen...dramatic difference, though still not crisp.
Seeing the screen was my drawback...
working outside, but I found a screen cover (similar to a privacy screen at a bank) that allows me to see in sunlight. I have a second keyboard & mouse for my laptop and wireless internet connection, so all I need now is a second footpedal, and I have 2 complete systems to transcribe on. I find being outside when the weather is pleasant keeps me more alert and is definitely a nice change of scenery...which definitely makes me more productive.
Would think a 10" screen would make it
x
Who is your employer? What is a TES screen?
|
