Line rates gross versus 65-character
Posted By: libby on 2007-03-26
In Reply to:
I recently had a call for family practice dictation and I offered 12 cents per line. Have always charged by the gross line and was charging 14 cents, which I thought was too high, so lowered it to 12 cents. However, the more I am reading I see that 65 character seems to be the way everything is getting billed. I also realize at 12 cents per line I lose a lot going to 65 character lines.
I also realize with family practice that they might have a lot of times where there is one or two words on a line and probably wouldn't be too happy about paying for gross lines.
I guess I'm looking for advice on charging. Is charging for gross lines unheard of anymore? I have already quoted the 12 cents, so that will have to be my charge. But as far as gross or 65 character, I haven't been asked that yet but would need to have that absolutely straight with them before starting. Any opinions would be greatly appreciated. I know I'm a little behind the times and am trying to catch up and stay competitive also.
Thanks!
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
65 character line versus gross lines versus pay by word
I am checking into other options for transcription. Can anyone tell me how to compare all of these types of lines & also payment per word? I know companies use different scales, so I wondered how they compare. I have been paid on a 65 character line with spaces, but I may be making a change in the future - don't want to get burned.
Thank you in advance!
Gross line versus character line....Sm please
I am thinking of taking a job that pays by the gross line and not a 65-character line. I have never worked this way. Does this literally mean if there is one little word on a line you get paid for it? I have not pinned her down on a line rate but I am just thinking I am going to be comparing apples to oranges and am wondering how to accomplish that.
Thanks for any help!
Question versus gross lines versus 65-character lines....
I have always charged or been paid by 65 or 60 character lines or per letter or space typed, but have never been paid or charged per gross line.
What is the advantage of this? If I were to charge 11 cents per 65-character line including spaces, what does this figure out to for an average line rate and how do you do this calculation?
I'm wondering if it is financially beneficial for me to bill by gross line or to keep it the way I have it. I do know some accounts will only pay per 65-character line, as this was the deal my first own account I recently acquired. They were adamant on a 65-character line, but didn't specify with or without spaces and I personally would never not charge for spaces.
Thanks for explaining this. I appreciate it and hope everyone has a speedy day.
$.06 gross line / .70 = approximately $.0857 cents per 65 character line.
A gross line is anything on a line versus 65 gross characters per net line the other way. You make more money working for the gross line than for the 65 gross character line, as long as the line rate's OK.
Yes if gross line or 65 character line with spaces....Good Deal!!! nm
x
Curious, do most IC's usually charge by the gross line or 65 character line?
Thank you~
65 gross character line
Could someone please explain to me how this works. I have been an MT for 7 years with the same company and have been paid by # of total bytes divided by 72 x 11 cents per line. I am now moving on to a new job which pays by the 65 gross character line and I'm not sure how to figure this out. Would appreciate any help. Thanks so much.
A gross line IS a gross line regardless if it's 90 characters long or 1 character long... SM
I'm very sorry that your lines are 90 characters line and you get paid by gross lines. You are cheating yourself - that's not my fault. You cannot change the definition of a gross line. So I gues I'm not understanding what you are trying to say. Now if you are trying to say that your line equals 90 characters and that's how you figure your lines, than you are not using gross lines. You have defined a line to be 90 characters, whereas most MTSOs define a line as 65 characters. If that is the case, then I must say again, you are cheating yourself.
So which is it, do you get paid by gross lines or by a 90 character line?
gross line rates
For my smaller accounts I charge 12 cpl under 4,000 lines per month. For those from 5 to 15,000 lines per month I charge 11.5 and I have one account at 10.5 but that is only because he gives me a week's turn around time. Again, I look more at what I make per hour than what my cpl is and if I make $45 an hour at 11.5 I keep it there. Even with the 10.5 cpl I make close to $50 an hour. But if it is a large account and it goes close to 2K per month, they will freak out. I do give a 1% discount for payment within 3 days of receipt and they all love that and do pay mostly the next day.
Patti
RATES PER GROSS LINE
WHAT IS THE GOING RATE (GROSS LINE) FOR TRANSCRIPTION AT HOME. I AM SETTING UP MY 1ST CLIENT A DOC IN UROLOGY.
I was referring to gross 65 character per line with spaces, sm
but again, it was very grueling, but possible. Granted, I had no life besides the keyboard.
65-gross line vs.65-gross character line
Can someone explain the difference between these two? I am assuming that the gross line is better than the gross character line. How much better is being paid by the gross character line than just by the standard 65-character line? Does anyone know how much difference it would make in dollars and cents?
Thanks.
what is the .065 cents per gross line equivalent to in 65 character lines?
Would it be about 8 cpl 65 characters or higher?
There is no such thing as a gross 65 character line! OMG! No wonder MTs are making peanuts SM
Some MTs can't even define a line.
A gross line is a any line with typewritten characters on it no matter how long or how short.
A 65 character line is just that - a line with 65 characters on it.
WOW!
I agree with Tinks....no such thing as a 65 character GROSS line....unless
you just so happen to type 65 characters during on that particular line. LOL
A gross line can be a full typed line or it can be one word on a line to complete a sentence that began on the prevous line. But it gets counted as an entire line.
Gross versus 65 char line
Can someone tell me how a gross line is calculated. Thanks.
But that's a GROSS line, not a 65 character line.
So a newbie would have no problem at all hitting 150 lines per hour. A gross line is any line with a printed character on it.
Which is better? Gross line or 65 character line? It's
nm
gross line and character line
I am an IC currently doing one doctor who pays me by the hour but I will be starting another doctor soon and he will be dictating differently so I was going to charge him per line. What is the difference of charging gross lines or per 65 character line?
byte count versus gross line-sm
Does anyone know how to compare byte count versus gross line pay?
Thank you
Quick question! Is 10 cpl with benefits at 74 character line better than 9 cpl at 65 character line?
Thanks
Has anyone kept a list of line rates, report rates, benefits, etc for sm
the different companies out there? I feel lost and confused. It seems like everything is changing daily, and I am not being organized enough to keep up. I am about to actively look for full time employment again but if there was a list, I would be able to sort through a lot more quickly.
Can anyone help? I am going to start keeping a chart myself in case anyone needs this in the future.
Line rates in the Northeast - can anyone advise as to what the going rates are in the NE part of the
country? Specifically Connecticut. I want to make sure I am on target here. Thanks.
Are your lines 65-character, gross, or
other? Just curious as I do clinic work and in my area the going rate for gross lines is about 12 cpl, but more like 15-17 cpl for 65-character lines. I have heard (don't really know how reliable it is) that hospitals are charged up to the 22 cpl range. (I assumed that was on 65-character lines.)
Gross lines versus 65-char, etc.
I think the above poster misunderstood me. I was trying to simplify the difference between counting a gross line and counting a line via character - which IS basically blowing out the document to full 65 character lines (with or without spaces)and counting them, versus counting anything on the line as a line.
That is true, though - the best way to compare documents is to look at the gross line count (after changing margins and font to 1" and Courier 12 respectively), then taking the character count and dividing by 65. Many who have never been paid by gross lines or have not really compared the difference would be amazed to see how many less lines you get on a 65-char count.
Gross line = each line on page counts as a line, even if it's only 1 word. nm
x
What is the average line/hour for a 65 character line with spaces? NM
.
A gross line is anything on a line is a line. A line set at 65 characters means it sm
has 1-inch margins on each side. The maximum number of characters on that line would be 65 and that includes spaces. If there is 1 character on that line it is a line.
A standard 65-character line usually consists of 65 characters with spaces unless, of course, the employer does not pay for spaces and then it would be 65-characters without spaces.
Gross line means anything on a line is counted as a line.
You can get an idea in the difference using documents you have already created, assuming you're working in Word. Simply open a document and check the properties. Click on the statistics tab and you will see the number of lines as well as characters with and without spaces. If you're currently getting paid by the line and a line is 65-characters with spaces, do the math and see how that number of lines compares with the number of lines in your stats.
One thing to keep in mind: if you have a blank line between paragraphs, instead of hitting the enter key twice, format your document to give the appearance of blank lines between paragraphs.
Gross line, also including blank lines because my line rate is so low. It all works out in the wash.
x
A gross line is any line with typewritten characters on it - no matter how long or SM
how short. So your gross lines may be longer than 65 characters, but you get credit even for a line as short as "Sincerely,". If your gross lines are not being counted that way, then you are not being counted on gross lines and are probably getting screwed. I'd look into that if I were you.
IC, by line, 68-72 character spaces/line
@
What's the diff between a gross line and a 65-char line?
Mebbe just got my first OWN ACCOUNT YAY! He said to charge him the "going rate" since I pay him that. This could be the start, baby! (I hope)
A gross line is any amount of characters on a line
for instance...
MEDICATIONS:
Effexor
Prevasid
A 65 character line without spaces is black marks on the page only and 65 w/spaces is everything... tabs, spaces, numbers, letters, bold, etc.
gross-anything on line counts as line,even one word
xx
Aaahhhh, now I get it. Gross lines vs. Character lines. I guess I've just been conditioned to
think in terms of character lines. One of the perils of working as an IC for somebody who defines what a line is versus owning your own company and defining it yourself. After working for someone else for 15 years, maybe it's time to bust out on my own.
65-character line
Some of you have asked about what her lines consist of. Her lines are the same as mine--65-character line including spaces. I know she has some templates, but I just really think that she's exaggerating somewhat. Maybe she can hit 500-600, but I just don't see how anything higher than that is possible.
I do like a good challenge, though, so I'm going to get started with my Instant Text and see where my counts are a month or so from now.
Thanks for all of your replies!!
Is this a 65-character line?
Are you getting paid extra for bold, underlying, etc? Don't see how they figure 6 cpl with spaces equals 9 cpl unless they use a different character count for their lines.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
70 character line
Is there anybody out there in the entire universe who uses a 70-character line? I work at a hospital and we have to type 1100 lines a day on a 70-character line. Just curious.
I think it was based on 65-character line
All these formulas are confusing to me. I guess I need to ask some more questions. But, it's also an IC position, so that makes a difference doesn't it? Low pay for that? But, you are right, might be good experience.
What is "compensation 65-character line B/W"? nm
xx
Has anyone ever heard of B & W 65 character line?
What exactly is it? I know 65 characters, but is that without spaces or what??
.08 cpl/65 character line for me right out of school.
/
I charge by 65-character line (sm)
My clinics have wanted 0.5-inch margins on the side. One of them wanted 10-point Times font. I think 65-character lines are fair for both parties.
___cents/65 character line
many transcriptionists get paid by the 65-character line
It is based on a 65-character line. sm
Headers/footers not included, spaces are.
My ES accounts always match that of Word when you take total characters including spaces and divide by 65.
EditScript software does not "control" spaces after a sentence. If you put 2, it will count 2, and if you put 1 it will count 1.
If a comes up ready for editing and you have to transcribe part of the report, you are paid at the editing line rate....unless you contact your account/supervisor and tell them you had to transcribe it. Depending on the company or hospital, they may or may not give you the transcription rate. That is probably a case-by-case basis or account-by-account basis.
The software can not determine you transcribe part of a report that was initially q'd for editing. If that dictator is voice recognized and he dictates one sentence, it becomes a document "Ready for Editing."
I hope this answers your questions.
I have been working with ES for about 7 years now. Absolutely enjoy working with this software program.
65 character line with spaces
TIA
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines, then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50. This is if it is a 65 character line including spaces.
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines (650 divided by 65), then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50.
|
