Lanier has propietary programming...sm
Posted By: Georgia gal on 2006-08-16
In Reply to: Question about Lanier VoiceWrite EX - emma
and therefore their equipment can only be used with Lanier equipment.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Lanier programming help sm
When I dial into the hospital on my Lanier LX-219, I get the doctor's dictating system, which has a 4 digit code, instead of transcription.  The unit is set to slave mode. Is there anything else I can do to fix this? I haven't used it for awhile, but did use it before for transcription. Any help appreciated! Thanks! 
Lanier Voicewriter programming
I've searched through the archives and found some good programming info on the Lanier voicewriter. However, I couldn't find what I need. My loving 17 MO son hit some keys and now I can't see the lower screen. Anyone know how to fix this? Thanks
Anybody working tonight who knows Lanier programming?
x
Hi, Deeni! I did Lanier for several years and was always told that Lanier....sm
would only work with/accept/interface with other Lanier products, that everything was proprietary, but that was a few years ago and do not know if anything there has changed, wish I was of more help! Have a good one!
Programming a dictaphone
I have a dictaphone, model 0421, which my company would like me to program to work with their Lanier system. I have no idea on how to do this. I tried e-mailing dictaphone and could not understand the instructions at all. I am able to dial into their system however, my foot pedal works backwards. This would not be a major problem, but my fastforward and rewind do not work at all which is a real problem. Any ideas?
Programming C-phone
Hi everyone,
I purchased a Dictaphone C-phone off of EBay; however, it did not come with a manual. I am totally lost. Are they all the same when it comes to signing a job off, leaving a job open, fasting forwarding a job, etc.? Is this something you have to program into the phone? If so, can someone tell me how to program my phone for these different requests?
Programming C phone
The service you work for should be able to tell you the keys to push to sign off a job, etc. However, here is a link to the Dictaphone answer desk for more detailed instructions.
http://support.dictaphone.com/scripts/rightnow.cfg/doc/sales/opmanual/Connexions/0420qr.pdf
good HBO programming may not be...sm
to everybody's liking.......
dictaphone programming
 Does anyone know how to program headset into the dictaphone to work?
Thanks so much.
HEADSET PROGRAMMING
Hit the program key at the top then keys, then pick the key you want then the code is #*11 then hit the select key and then stop key....good luck, I had this problem as well and do every now and then when I unplug my equipment.
HELP ASAP; C-phone programming
I am supposed to take a test using C-phone using following keys: play 4; pause 2; rewind 7 and fast-forward 4.
Anyone know how I can get the dictator to slow down? It would surely help me. TIA!!
Need Help!! programming DVI for Dictaphone System
Can anyone tell me how to program a DVI transcriber for Dictaphone System. The documentation I have for my DVI says it is compatible with Dictaphone but when I try signing onto a Dictaphone system, nothing works - keys or foot pedal. Any suggestions?
If you are talking about programming a c-phone
someone posted the directions a while back. I have the directions, I cannot find them at the momment but if you will look and the 3 gray buttons below the screen push the one that says progm. I believe from there it is self explanatory. HTH a little.
c-phone headset programming
I got this on 06/01/07 from MT Stars - here it is for you to program
Make sure the Dictaphone is plugged in and also into the wall phone jack.
Notice the display screen at the top of the Dictaphone, 3 gray buttons under the display.
Press the left gray button under the word PRGM.
The display will now read
PROGRAM
KEYS ID/TIME TEL
Press the gray button below the word KEYS.
The display will now read SELECT PROGRAM KEY. At this point push one of the 16 black keys below the display on the telephone keypad. If you are programming your headset for example, select any one of the 16 black keys that you want. Press that black key.
The display will now say ENTER NUMBER. For headsets programming #*11 (that is, the POUND key, the STAR key and then the number 11)
Now press the MULTIPLY KEY to the right of the telephone keypad. This key says SELECT on top of it and has an X multiply function on it.
Press the STOP key to exit programming function. The STOP key is located second from the right on the top row of the keys on the bottom of the C-phone.
Hope this helps. I printed this out and this has been so useful, especially when unplugging the C-phone during electrical storms for a period of time and you lose the programming.
HAPPY HOLIDAYS TO ALL
t
Instructions for programming Dictaphone
http://support.vianeta.com/Documentation/Implementation/DictaphoneProgrammingInstructions.doc
Hope this helps.
Ludi
Programming C phone in general
C-PHONE PROGRAMMING INSTRUCTIONS
Note: The C phone mapping system may be different for each facility. Ask the supervisor/owner for the programming keys needed for each function. Sometimes you may find them on the face of the phone, under the plastic cover. There are 16 buttons available to program (1-8 down the left side and 9-16 down the right side)
You will use the function keys under the display window and the Select button (X) next to the number key pad.
On the C phone screen, there are 3 buttons below the display window. The messages in the columns above the 3 buttons are:
Time Date
Progm Msg Directory
Select the Progm button and the follow screen appears:
Progrm
Keys ID/Time Tel
Note: Put some thought into the Keys that are convenient or work quickly. For example, button 9 (top right side) may be the button to dial into the system; button 10 may be the ID number you key in to access work, etc.
To program the keypad, press PROGM—KEYS
The screen asks you to select a program key. Chose one of the 16 buttons.
The screen will ask you if you want to Revise the information there, press one of the 3 buttons in the message screen. We will select YES. Then enter your ID number or dial-in number etc followed by the #.
We now need to SELECT this choice as the final step for programming this button. The SELECT is on the right side of the phone number pad, the “X” key. Each time you program a key, the last step will be to press the SELECT key to end that function.
If you make a mistake during the programming process, just press the STOP key on the C phone pad and start over.
For each subsequent function you want to program, follow the instructions again from
PROGM- KEYS
C phone programming instructions
C-PHONE PROGRAMMING INSTRUCTIONS
Note: The C phone mapping system may be different for each facility. Ask the supervisor/owner for the programming keys needed for each function. Sometimes you may find them on the face of the phone, under the plastic cover. There are 16 buttons available to program (1-8 down the left side and 9-16 down the right side)
You will use the function keys under the display window and the Select button (X) next to the number key pad.
On the C phone screen, there are 3 buttons below the display window. The messages in the columns above the 3 buttons are:
Time Date
Progm Msg Directory
Select the Progm button and the follow screen appears:
Progrm
Keys ID/Time Tel
Note: Put some thought into the Keys that are convenient or work quickly. For example, button 9 (top right side) may be the button to dial into the system; button 10 may be the ID number you key in to access work, etc.
To program the keypad, press PROGM—KEYS
The screen asks you to select a program key. Chose one of the 16 buttons.
The screen will ask you if you want to Revise the information there, press one of the 3 buttons in the message screen. We will select YES. Then enter your ID number or dial-in number etc followed by the #.
We now need to SELECT this choice as the final step for programming this button. The SELECT is on the right side of the phone number pad, the “X” key. Each time you program a key, the last step will be to press the SELECT key to end that function.
If you make a mistake during the programming process, just press the STOP key on the C phone pad and start over.
For each subsequent function you want to program, follow the instructions again from
PROGM- KEYS
Need some help with Dictaphone C-phone programming the foot pedal..... sm
I have a coworker that needs to program her Dictaphone foot pedal. The foot pedal does not stop or start the dictation from what I understand. It is a used unit with no manual. I had a C-phone years ago but do not ever remember having to program my pedal. Thanks in advance!
Lanier
Yes Transcend uses the voice writer on certain accounts. Just started using it.
Lanier VXP??
Anybody use Lanier VPX? I can't get my wav pedal to play these files. Any suggestions?
Lanier VXP
These can only be played with a Lanier footpedal. They have a proprietorial header on the voice file and cannot be opened without the appropriate footpedal.
I have a lanier - sm
I would like to know more too. Thanks.
lanier
Does anyone use a lanier voice writer and looking for extra work? Thanks!
lanier
I know this may be redundant, but try unplugging everything and then start over. I have had this happen and it corrected it. Good luck!
Lanier LX-219-1
Can someone tell me what the VVI board underneath the Lanier machine is used for?? Does the Lanier machine with the phone attachment work the same way even though it does not have that VVI board???
I NEED HELP with this Lanier LX-219-1
Please help...I am ready to pull out my hair....
I need to set up my Lanier LX-219-1 system into a vonage modem
and I am TOTALLY lost...have tried all kinds of different connections
to no avail....Any ideas or help would be greatly appreciated...
Thank you...
HELP WITH LANIER LX-230
My Lanier LX-230 will NOT turn on when I push on/off button . I tried *99 1 to see which buttons are programmed, and the on/off button did not light up  . Does anyone know what (if there is one) the code is for on/off button for the LX-230. To check, pls. try *99 then 1 while your LX-230 is off, then push the on/off button once - the code should be displyed...PLEASE reply to me with the code.
WOULD APPRECIATE YOUR HELP!!! 
Lanier
Lanier
If you use a calling card to dial into the hospital system using a Lanier, do your phone card minutes start to decrease immediately or only when you have the foot pedal down and are listening to the dictation? I hope this question makes sense? Tx
lanier
 On mine assign job is on the right side 5th one down - good luck!
IC Lanier
Check out MDI-MD.
Could someone tell me what a Lanier is.
I know I heard of it but not sure exactly what it is.
Lanier
It is a device that hooks into a phone line and you hook in your headphones and receive the dictation through there. Expensive peice of equipment. You have to dial into where ever your dictation is coming from. Does that help you at all?
I currently use it.
Lanier
Looking for an affordable digital system that would allow at least 4 people to dictate at the same time. Since they dial into the server with Lanier, is it possible for more than one person to be dictating at the same time? Would you need more than one phone line to allow for this? (Not sure if this system would allow for that or not). Any suggestions?
Thanks.
lanier
if you know job #, use the assign by job # key and reassign it to yourself. if you don't have that key, holler and I'll give you programming directions.
lanier
Try unplugging the phone lines from the modem (flat box) for about 10 minutes and then plug back in.
I need some help. I have a Lanier LX-219-1 with VTI. sm
I need a terminal block, power source and pedal. Can anyone tell me where I can get these. I have checked Executive Communications and they have them new. I would like to buy used if at all possible. Thanks!
Lanier P-145
Hello,
Does anyone know how to use the Lanier P-145(An old telephone 4 tape recording system)? Or does anyone know of a manual I can get my hands on? I just purchased a used one and I have tried everything and I can not get it to work!!! It does power on, but I am not sure if I am hooking everything up correctly.
Thank you very much.
Kimberly
Lanier
Agree. Lanier the best, but expensive. $600-700 for mine 12 years ago. Lasts forever, and you can spend the same $600-700 on cheaper models that will need to be replaced with new on a regular basis. Have tried Olympus, Panasonic, Sony - all lasted less than a year.
Lanier 219
Any one here know ths machine like the back of their hand? I have a few questions about functions of some of the keys.
Lanier
Sometimes they get sensitive and can do that, or also not give a full visual read-out in the window. When that happens, the tech tells us to fully power it down, totally unplug from its power source (from the wall, etc.) and let it sit for a full 5 minutes. This cools the unit down and since they are preprogramed which also includes programming of your footpedal, this allows the preprogramming to come back to its original state. Mine does stuff like that about every month or so. Most of them are pretty old. Also, you may have to get technical support if powering down does not work, to check your pedal settings. Hope this helps. I know these "old dinosaurs" get fussy sometimes.
Lanier
I am trying to find out what are the advantages/disadvantages of Lanier versus other platforms?
Harder/easier?
Outdated/up-to-date?
Lanier is the best
Any transcription product with Lanier on the name is #1 in my book.
Lanier
Lanier is one of the oldest, slowest, clunkiest systems around. I actually quit a job that was paying me 11 cpl on Lanier and took one for 9-3/4 on WAV and am making waaaay more on the WAV account. Lanier stinks.
Lanier help
I need the command prompts to use to access a Lanier system with non-Lanier equipment.
I access 2 other Lanier systems with the same equipment with NO problem at all. But this one is recognizing me as a "dictator" and not a "transcriber".
The prompts I do have, don't work. They are "call in, wait for beep, enter #6" I should hear "welcome" then enter my ID and should be good to go.
I've spent almost 3 hours searching for the solution on the internet and I need help fast. There are a ton of jobs waiting for me on this new system - so I'm losing $$$
thanks in advance for any help or suggestions,
Lanier
Is it possible to get Lanier voice files with anything other than a Lanier? I tried calling in on a Dictaphone, but it doesn't work. Seems like I remember someone posting about this, but I can't remember how she said it was done.
Thanks.
Lanier
End
Lanier
Good morning grasshopper... luv that name LOL
Thanks so much. Other than the color being black, it looks the same as my old faithful friend that was white or beige, but not black. I will try it. Thanks again...happy listening and typing to ya grasshopper.
Lanier
Good morning grasshopper... luv that name LOL
Thanks so much. Other than the color being black, it looks the same as my old faithful friend that was white or beige, but not black. I will try it. Thanks again...happy listening and typing to ya grasshopper.
Questions on Lanier 219 or 230
Could some MTs that use either of these systems please email me. I have a ton of questions concerning these machines and don't know where to look. Looking at working on an account that requires one of these machines and have been looking on ebay. Asked a few questions to one seller and I don't think he knows what he has. Any help would be really appreciated.
Tabatha in Charleston, SC
Lanier.....TransNet???
Hi Everyone!
Do you know if Lanier makes a sofware package similar to TransNet in which you can sign onto their system, download your voice files, and then sign off? If so, what is the name of that software?
Thanks!!!
|
