Just look at your toolbar..it has left, right, and
Posted By: center justification...just click on 2007-03-10
In Reply to: How do I center something in Word? - just me
nm
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
I use Word 2003 and on the track changes toolbar there is a while pull-down box on the left.
This gives you your final report without the marks.
Just hit Alt+Shift+left arrow on line 1 and it will go to the left margin. Otherwise,
you need to use a numbered list style to do it every time. Each version is different, but you may already have a numbered list style in yours that stays at the left margin. Just assign a keyboard shortcut to that style.
I would, but I cannot get a Toolbar
of any kind to come up. Just the horizontal and vertical rulers.
Thanks for the suggestion, tho!!
toolbar
In the right hand corner, there is an icon called *tools*. Click on that and a drop down box will open with *toolbars* in it. I have not tried it myself, but there should be something in there to get what you are looking for. Also the *customize* button. Good luck. hope it works for you!.
toolbar
just figured it out! yeah!!
Toolbar
Go into view, toolbar and see which ones are highlighted and then you can hit which ones you want. I use standard and formatting for mine. that does give two lines but it is what I use. Hope that this helps.
Once I get top toolbar set up how I want it,
x
Have you tried using the toolbar instead
xx
Do you have a customized toolbar?
Is this a situation where you can set one up? If so, go to View, Toolbars, then to the Toolbars tab and click "new." Name it whatever you want (I just use my first name) and then click the Commands tab and drag the icons you choose over to your new toolbar.
The reason I am saying all this is that I have a Bullets and Numbering icon on my toolbar, so whenever the numbering starts messing up, I can highlight the area where I want the numbering to be, click on the Bullets and Numbering icon, and fix it - quick and easy.
Plus I can put only the icons I use most on the toolbar and not have all those I don't want. Speeds things up a lot when I don't have to sort through a bunch of icons to find what I want.
Toolbar in what program?
xx
You set up that on your toolbar using Word? (m)
Any chance you could tell me how? I'm not that savvy, lol. I appreciate the help!
Floating Toolbar
I had to try around with a few different things but I think I went to Microsoft Office Word Help and followed the directions for "create a custom toolbar"
On the toolbar there is this rectangle with
the percentage mark. Make sure that it is set on 100%. This determines the size of the text.
Tell me if it worked, thanks.
I used to have a free little toolbar that I downloaded and
there was also a website where you could sort the feedback of ebay users. I deleted it because I'm just not into ebay as much as I used to be. However, if you check Google or Download.com, you ought to be able to find something. GutCheck is one of them, but I've never used it.
I typed the following into Google to find GutCheck.
ebay sort negative feedback
And "ebay feedback" without quotes at download.com to find BayCheck.
HELP. My husband screwed up my toolbar
how do i get it back down where it used to be? The start menu, etc.
Look at View/Toolbar -- and over to the side of that is a SM
dropdown menu that should have some things checked on it. If you can't see "view" then do alt+v and see if that works.
I have a technical question. On my toolbar when
I click on any of the categories (File, Edit, View, Tools or Help), instead of getting my dropdown menu I get a trasparent square. If I drage my mouse down, then the titles appear but you can see the screen under them. The same thing happens on Outlook Express. (I have Windows XP). The only one that shows the regular dropdown menus is Favorites. This just started today. Has anyone had a similar thing happen or know what to do about it? Thanks.
Pull Down "View" on Toolbar.
Then hit Zoom.
on toolbar, click view
then uncheck ruler
on the toolbar, next to the Bold button
There should be a little box with a number in it and a little black arrow. If you click on the arrow, it will bring up a bunch of font sizes. I would pick 12 as it is a standard size for printing. Hope that helps.
Lock toolbar is not an option I am given? Any
x
Line count is not on my toolbar.
I stand corrected. I had no idea it was on the Tools menu; I have always used a separate line counting program OR the Properties under the File menu. Also, my Tools menu is condensed most of the time and I had not noticed Word Count on there before. "Look before you leap."
MS word toolbar question - sm
Somehow I lost the print and print preview options on my toolbar and I do not know how to get them back.
Any help would be appreciated. Thank you
Toolbar in Work Queue
Does anyone know what the expanded toolbar is in the work queue? It has about 7 icons at the top instead of 3?
Lost toolbar on Internet Explorer
Can anyone tell me how to restore the tool bar with the buttons such as home page, refresh, go back arrow, forward arrow? I know that there are other buttons on there but those are the few that I use most often and can remember. My guess is that something has been inadvertantly turned "off" but I don't know where to look for it.
View > Toolbar > Lock the Toolbars
p
Get a Google Toolbar, description and link enclosed
I have a Google search toolbar at the top of my browser. It's a small line like the address bar but it says Google beside it and I just type in my searches there instead of going to Google first, etc. I've found it very easy to use. Of course, as with anything there are extra parts to the program, I just added the basic tool bar and went to options and only kept the parts of it that I wanted on my toolbar. It makes searching a whole lot easier, all I need to do is bring up the internet and my search is at the top.
Mentioned below, zoom in over 100% on your toolbar won't change print nm
nm
I use light blue - it matches my toolbar in MS Word 2003 nm
x
Computer techs - I want to add undo, redo, and repeat to my IE toolbar which are not listed as an
nm
Press Ctrl+Shift+8 or click on the pilcrow on the toolbar (looks like a backwards P). nm
xx
Green back arrow/forward arrow on toolbar. nm
.
Click at the top of the column you want to order, then click on the AZ button in top toolbar.
.
Not right now as seems everyone has left
due to the line counting rip off issue. Otherwise do run out of work tons of times.
That why you left?
x
you left out one
>>>How darn hard it is to quit. I have tried everything. Patches, gum, Wellbutrin, Zyban, cold turkey, etc.
You had the dream, but you didn't have the drive. You have to want it badly enough to stick with it NO MATTER WHAT.
I'm talking from personal experience as a former 2-1/2 pack per day smoker.
Last cigarette was May 6th, 1992. Quit cold turkey.
Did you get your pay when you left?nm
zz
I should have said "I left him and TOOK the
baby, the dog, the IBM and the dictaphone! Eek! Sounds like I left them WITH him! No way! 
What - that you left 24 and QA was able to get 16 of them? LOL
x
I left because of it
Unprofessional emails and phone calls.
Nope. I ain't takin' it. I respect myself more than that. It was the attitude of everyone in the company I came in contact with. Unbelievable.
Getting out of MT, I have left MT
because of the reasons stated below. Because I was a good ER MT, I received all the crappy dictators, accounts, you name it. Even told the MTSO that I was getting burned out with all of the crap, but six months later, I came to the conclusion that getting an ulcer was not what I wanted for my dedication. Tried four or five different companies, and as a poster said below, they lied about everything (accounts, lines, ease of use of program/software, amount of work, etc.) So I'm gone. Kind of miss the medical transcription work I did but do NOT miss the BS that comes with it. They used me until I couldn't bear it anymore.
Yes....I just left my MT job ....
I relate with these comments 100%. I worked for a great service with a great owner for the last 10+ years. First started out in 1989 making great money ( and on a typewriter) with decent turn-around-time and simple common-sense formats. Over the years, the Turn Around Time has decreased, the formats have become a maze of ever-changing rules, and as others have stated...no money! I might as well get a job that is less wear and tear on the body and mind. "Chained to the computer" described the job well. I resigned a few weeks ago what had become a sweat-shop job. Seems like instead of the computer making the job better, it has become worse. Someone mentioned they heard it said MTs were making too much money. That is eerie because I remember hearing that comment 15 years ago and I tossed it off as sarcasm. Now I wonder. This job is nothing like it used to be. So, as stated I QUIT!
There was something you left out in
your post. What about the possibility that this person makes good money because they just guess and "fill in the blanks"? Or maybe they leave a lot of blanks so that they can do more work?
I have come across this before. Not all MTs who make good money are getting good money because they are good at their jobs. Some pad their lines, and some just make up stuff to fill in the blanks. To all of those GOOD MTs out there who struggle to make the money they once used to make, don't let people put you down as unworthy because they think they are better than you.
I left my job too
After 7 years and I should have left sooner. Their VR and platform were awful (Spheris) I was making half of what I used to. I have not gotten away from VR but I have 2 jobs where at least I can be more productive. I kept waiting for things to improve -I thought if I just worked on it it would happen- now I feel a lot of the stress is gone.
Thanks, what was left of my sanity has been...
restored! 
I'm beginning to wonder if that's all there is left is
crap dictation. Most of us say we're doing the crappy dictation and ESLs. So the good stuff is really going overseas or to VR? Or are there people here who get the good stuff all the time, which is why they make good money and we don't?
If you are just looking to align left or...
To align (left, right, or justified) you can either set the page up before you start typing by going to Format, then Paragraph, Indents and Spacing. You will see a General section that says alignment. This is where you choose how you want it set up. If you want to do this after you are finished typing, highlight all text that you want to format. Right click. The drop down box will give you the option of Paragraph. Choose Paragraph. This will bring up that same box that shows Indents and Spacing. Go to the General section where you see alignment and then choose which option you want (left, right, justified). This will then apply it to the text you have highlighted. Hope this helps.
no hair left
i hate to tell you but it doesn't get any better. been with them for over 3 years -- i still have my hair, but have lost my sanity!!
I've left MT too
Good for you!
I just left China
Actually, I just left China. Poor old souls. Not many pretty women in China.
I needed to get home to the states to see all the beautiful women. I felt like I was intoxicated when I came through the door at Medquist and saw all my beautiful gals.
If acct is on ASR, what is left for MTs
is the worst of the dictators that have always and will always be a problem. The best speakers are put on ASR to the machine can under stand it. They've got you. It is no faster that using expansions. There is no production increase, so there should be no decrease in MT/ME pay. THAT WAS THE DEAL! I will go back to cut and paste an old post that says what happens.
|
