Installed newer version of AdAware and ran
Posted By: that and can Google again. Thanks everyone. on 2008-04-04
In Reply to:
x
Complete Discussion Below: marks the location of current message within thread
The messages you are viewing
are archived/old. To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Might be a newer version. I used Sylcount a while back
I switched to PractiCount myself because it gives a line count similar to that of Sylcount but you don't have to save the files in any special format. When I had Sylcount, though, I definitely had to save them in .rtf format or it would tell me it was not a Sylvan .rtf file and that I had to resave document in that format to count it. I remember because anytime you reopened a file, you also had to save it all over again under .rtf format because it would default to something else. Real PITA!
I believe they recently upgrade to a newer version.
So perhaps you should notify your MTSO manager to alert them that there could be a problem.
What version of Word? That can't be set in newer versions. I had to do a macro --sm
I hope this link works for you. It shows how to make the macro. I use alt + semicolon for it because it seemed those would be a convenient shortcut to use. H
Here's the link (you'll probably have to copy and paste it):
http://fitaly.com/board/msword/posts/1629.html
Your friend has the newer version and it doesn't play .dss.
Have her get the older (4.15) version and it will work. There is a link somewhere on this site to the older version that was posted by the Administrator just a week or two ago. Do a search and it will lead you to the correct link.
New company software installed? You might have Their printer installed as default. You'd have to
s
I installed it and then installed the other schemes. SM
I put the erotic on. It is pretty funny when you go slow. Thanks, I needed that laugh. :O)
Do you have Adaware?
That's a good place to start,and I'd try superantispyware as well. I run both and get stuff from both. Also, if you delete your temp files, old emails, cookies, etc., that will sometime help. Not sure what you've done, so I can't offer much info.
Adaware is equally as good and there too..nm
yes AdAware is good, so is that cleaner program
but just to be wary about others that offer free antivirus and then latch onto your system so you will buy it...
:)
I thought with AdAware, it will detect but not fix for free with their
nm
They're still at version 7 and version 8 is supposed to come out this Fall, which may be compatib
Maybe newer MTs know something I don't
I type mg/dl and Kay Ciel (told long ago KCl could be confusing to someone reading). Have been doing this forever and I'm not sure if it has changed. No one has ever corrected me.
To the newer MTs here, the ones who don't
Ignore 'Shroom. Don't let yourself get into that mentality. Life is what you make it. MT CAN be a very profitable profession. It's not for everyone and not everyone can do it. But if you are good at spelling and grammar, and you can type fast, and you are dedicated to really learning and not just doing a crap job as fast as you can so you can get paid more, your patience and hard work will pay off.
My #1 advice is: Get a job in a hospital transcription department. Not acute care at home for a service. Get a job with a hospital. The pay not NOT be as much as you could make at home for a service, but that experience will prove invaluable. Work there for a few years. Learn the ropes. Learn to do all types of reports - the basic 4 plus everything else. I have worked for a service and for a hospital and I learned so much more at the hospital. The service was about production; the hospital was about quality. They wanted us to really KNOW what we were typing and when there were words no one could get, the MT supervisor would ask the doctor and we would get it straight from them. Doctors would also come down to talk to us and explain things to us sometimes, and that was a big help. I worked at a hospital and a service at the same time and there were so many things (terms) that the service MTs didn't know that I knew only because of my hospital experience.
Now I own my own service. I get all my accounts through word of mouth, partly (actually MOSTLY) from my contacts that I developed back when I worked IN a hospital. I have never had to advertise. I have always been praised for being an excellent MT. The hospital supervisors at the hospital where I used to work know that. When they get a call from doctors or other hospitals asking who they recommend for transcription services, guess whose number they give out? Yep, mine.
When I first started out I didn't make much money at all. But I worked hard and learned everything I could. I never had an attitude like some on this board, that I wasn't being paid fairly, or that someone owed me more money, or that I was being cheated. I worked and gained knowledge and experience, and made sure my quality was excellent, and added to my expander, and developed new ways of using shortcuts, and kept looking for the next opportunity that would move me up a little more.
I never make less than $25 an hour. I usually make $35 to $40 an hour. I have had an occasional hour where I made over $100 - yes, $100 - and no, I am not lying. It was a surgery center account and one day a week I would transcribe routine cataract extractions with lens implantations. I had that I had a template for and all I had to do is pop in the patient's name, right or left eye, and the size of the lens used. I would do one right after the other, over and over, and make over $100 in an hour. Would have been nice to do that all day long, but after an hour I was done with the cataract surgeries.
Anyway, don't sit there thinking you are never going to make any money in MT. Don't listen to the people who want to bring you down. Don't waste time thinking your glass is half empty. Look at the opportunities that are in front of you and start taking them. Maybe you make 8 cpl now. Do the best work you can do for that company. Be valuable to them. Become an asset to them instead of a liability. And when you find something that's a little better, do the same thing there. Work your way up.
After you get the experience (hospital preferably), keep working and honing your skills. Then decide "Okay, I am going to spend X hours a week working on getting my own accounts." Maybe 4 hours every Saturday. So you set aside that time and you think of points you want to make to potential clients. Set up a business number or a separate phone number to receive business calls. Put a business message on the line so if you miss a call they can leave a message. Figure out how you will receive dictation - dictation system, TASP, or whatever. Make flyers. Drive around and check out potential clients in your area. Go through the phone book or the little blue book of doctors in your area and start sending out flyers or walking door to door. Every Saturday spend 4 hours doing the next step. Decide you'll send out or deliver 20 flyers a week, or whatever you want. You may not see results right away. Don't get discouraged, just devote 4 hours a week to it, every week.
There is money to be made in MT. You have seen people on this board tell you how much they make. They didn't answer an ad for an MT school on a matchbook and suddenly they are making $35 an hour. It takes time and patience and a good attitude.
From a newer MT
who does not have an extensive medical background and is only an average typist, this profession has been very stressful for me and not very lucrative.
I do learn something new every day however.
I think it takes a lot of prior skill or extra-ordinary talent to make it worth getting into for short the short term.
I am guessing it will take me a good couple of years to do halfway decent financially.
a must-read for newer MTs --
i think i might just try the 1/2 day goal method myself --
very kind of you to take the time to outline your ideas so well...
ya'll come back!!
Which one did you get...the older one or the newer one?
The ergopro is the newer one and has a USB connection. The older one has a PS/2 connection. The older one is far better in my opinion. Lot of good reviews on the older Belkin board on both Amazon and Newegg. Excellent key touch but it is a loud keyboard just to warn you. I loved it and still continue to use it but I found that it was harder for VR because it is a big keyboard so I using a smaller split board now. The only disadvantage to the Belkin ergoboard older model is the key markings wear off quite quickly.
For the newer MTs hearing a "v"
would not send them to the "z" section of a book or any website. Maybe a Google search would have worked, but I didn't try it to see.
How about lightening up on the new MTs asking questions on the Word Board. I am not a new MT (20 years), and I've asked questions. I'm not so sure there is a "level of word asking." Why be so brusk and hard on the new MTs? Are you afraid they will take your job? Don't worry there is plenty of work to go around.
I would hope if you had a question on the Word board, someone does not go on another board and post how horribly incompetent you must have been to ask that question on the Word board.
This is a wonderful resource.
This is why I uploaded the 4.15 version. It's a previous version
/
Newer Transolutions employee
Thought I'd put my 2 cents in - I have been with Transolutions for about 4 months now, and I agree with the statements about how nice they are - they really are. I am working really hard to increase my production and get up to level 5, which is the higher pay. Dolfan, do you have any suggestions on that? You said you just stay there no matter what it takes - does that mean you just put in as much time as it takes to get that many lines in? Does it usually take you significantly over your scheduled time? I keep resolving to do that, but then I get tired and end up between level 2 and 3. I am still adding docs to my glossary on a daily basis, so I keep hoping that I will get there eventually.
I agree also about the benefits - I am part time (25 hours/week), but I am earning PTO, holiday pay, etc. When you do have to work a holiday, you get benefit pay, PLUS time and a half - I think that is fairly unusual for an MT company.
The scheduling is flexible, too. I worked for as an IC before, but I actually found that I needed a schedule or I would leave work too late and burn out. But, that is just me.
Hope that is informative, and Dolfan, thanks for any help in advance! (Or any other Transolutions people out there reading this, if you have any suggestions.)
Melissa
Does anyone know if the newer versions of Escription sm
are compatible with Woord 2007? The requirements I received some time ago stated that Word 2007 was not compatible. Wondered if they had upgraded yet. TIA
Works is a dumbed down version of Word and Excel. You get the full version of Word in the Suite.
The Works Suite is a cheaper way of getting a full version of Word if you don't want or need the other applications in Office.
a resounding go with propofol; this is a newer drug that
is now used in place of Versed. You will be unconscious for the entire procedure, which means you will not feel any pain, in addition to having no recollection of the procedure. To coin a phase, "It will be over before you know it." Good luck.
Do you have a newer keyboard with commands embedded in certain ones? Don't think 5.1 had anything
s
I just installed ShortHand. I need help!
Does anyone know if ShortHand can be set up to insert superscripts and subscripts? I imported all of my Autocorrect entries from Word, but it wouldn't import the formatted text. For example, can ShortHand be set up to convert the "c" in A1c to subscript? I really appreciate any help on this!
Losr wp5.1 when XP installed sm
I always kept WP5.2 for DOS in case a client had a moldly oldy and I truly enjoyed having it on hand. When my new tower came in, I realized that WP5.1 was, of course, gone for good, as the tech gave me a new tower with XP. I have the diskettes and wonder if I did have an old WP5.1 job come in, is it possible to install with XP or is DOS necessary and is it gone forever? Love WP5.1, made me lots of money in this field, it was my "buddy" and I feel I lost a good friend. Crazy? Yes!!
I have installed it at least 3 times
due to computer problems where I've had to dump my hard drive and reinstall everything.
I don't know if you are talking about disks that you bought or disks that came with a new computer.
Gee, don't know :o(. Have you installed all drivers?
I don't have an Ativa. I wish I could help!
I've had up to 4 installed at once and
x
Agree with Shemah. Older Works didn't have it. Newer ones
are coming bundled with Word 2002, not Word 2003. Find out which version you need if you decide to buy a bundled package.
Had an old white Compaq board that was so "soft" & quiet. Newer
s
I have never had any problems, I have it installed on 3 computers,
I don't have the current version on my laptop as yet (don't use my old computer anymore, would if the other 2 died though....kids have it for playing CD programs, etc. But never had any problems with downloading, installing, etc.
MTStars spellcheck help - I just installed it and
do not see the "checkmark" button at the top with my other browser buttons. How do I access the spellcheck? It is installed and shows as a program on my list of programs. Help!!!!
I'm assuming you installed the software that came with?
If so, and don't laugh, did you try rebooting? I always do that first before I worry about any computer issues. If it doesn't take care of it then go back and make sure you followed the installation steps exactly. Is it the Mircrosoft Natural Ergonomic 4000? I have that and it's great...only thing I could complain about is it's rather wide, so when I do need to use my mouse, my arm has to reach a little farther, which isn't good ergonomically, but I do everything I can to avoid using the mouse anyway...oops, I digress! Good luck with your keyboard!
If it has never been installed on another machine, then you are fine. sm
I have bought OEM software off or Ebay, came with registration numbers never used, and it was fine. I was able to register and access support.
It you purchase a new pc, it may not come with Vista installed. However, sm
it most certainty will be "Vista ready," meaning, you will have all the specs you need to perform the upgrade.
Word 2007 installed and...
I lost my Stedman's and all of my auto corrects, but everything else seemed to be alright :)
I had to reinstall Stedman's and thank goodness I backed everything up so I had my auto corrects!!
I use the free one; not installed or paid for
I think the free (run-it-when-you-need-it) is great! Sure, the real-time protection and monitoring would be great, but I'm on a budget, and I can run their free version as often as I would like (takes about 2 hours, so usually right before I go to bed) and it finds all kinds of alleged 'problems' and I tell it to fix them, and it does. Sure seems to have been helping me, but it could be that in combination with all the other things I'm trying.
My husband tried the 'free trial' on his laptop that you actually download for real-time coverage, and it apparently REALLY bogged his computer down (so he says) and he had to take it off within a couple of days.
Any help?
I use IT. I highly recommend you have it installed.
date element in Meditech is F6, I think. Press F keys all the way. Then, try alt and the F keys all the way down and then control and F keys to see what their functions are. You can jot them down on paper and make it into a toolbar by taping it to the keyboard. Now that I think of it, if you have a Help Desk, they may have a copy of the F key functions to send you.
And also, you will need a speed typing engine which will be well worth the money.
It won't work. Stedman's has to be installed from
the disks. You can't even copy it a flash drive and then try to install it on another computer.
Try the Mr. Clean eraser, the newer one, I forget the exact name. Worked wonders for me. nm
'
A newer computer with a dual core processor runs cool. No need for it.
``
how would one find out if there was a keylogger program installed(sm)
on your computer?
I'm confused...have you installed Bytescribe/Docshuttle more than 3x?
If so, how did you manage this?
Not true - I used OEM software and installed on 3 computers. nm
x
I am wondering if I purchase a new computer with this installed will it be
compatible and does it function the same way as XP Pro or am I totally off base?
I just installed WP12 because my 11 files were corrupted (or so they tell me).
How do I get the files to ALWAYS save in .wpd without having to tell it to. it is defaulting to all files. Thanks.
Tell them your ISP has installed a new SPAM filter and a it's intercepting a lot of your e-mails
x
I've installed countless corporate networks...
This was my profession for years. They are secure. Wireless, wired, however. They are secure. More secure than residential by a long shot. Static IP's, WEP's, encryption, etc. It has nothing to do with it being a "public connection". You or I cannot "grab" the wireless waves out of the air. It has to do with the security set in place in the firewalls, modems, routers, etc. Not trying to be a smarty, just letting you know from experience.
Norton 360 was installed, I did a full scan, and it found nothing...MUST SM
I downloaded Malwarebytes and it found 12 critical trojans!! As soon as I find a good AV program, I'm totally uninstalling Norton's. Like you, I thought Norton was great and used it for years. Maybe it's just not keeping up with all the techno-creeps out there that have nothing better to do destroy the PCs of working people. UGH!!
If it's a retail version you can. If it's an OEM version, you can't.
``
Control Panel, Printers & Other Hardware, View installed
printers or fax printer, making sure the printer you are using has a "check mark" next to it. Right click on the printer that has a check next to it (if there are more than 1 listed), click on Properties. Under General, click on Print Test Page. If there is an error, it usually will list the problem and and offer you the option to use Repair. Additionally, you may want to check your connections to be sure they are secure.
|