Inside is a page I just copied with directions for

In Windows, how do I check my computer's IP address or physical (aka MAC) address?

Windows NT, 2000, and XP

To see what IP address, default gateway, and subnet mask your computer is using:

1. Click the Start button and select All Programs (XP) or Programs (NT and 2000).
   
   
   
2. Select Accessories, then Command Prompt (2000 and XP), or Command Prompt (NT).
   
   
   
3. At the command prompt, enter: ipconfig
   
4. To close the command prompt, enter: exit

For other IP information on Windows, including the physical address, at the command prompt, enter:

This will give you information regarding your computer's TCP/IP setup, including:

Host name
DNS servers
Physical address
IP address
Subnet mask
Default gateway
WINS servers

The IP address will be a series of numbers following the pattern xxx.xxx.xxx.xxx, for example, 156.56.27.32.

The physical address, which many people call the MAC address, will be a series of six hexadecimal number pairs following the pattern xx-xx-xx-xx-xx-xx, for example, 00-40-A4-F3-C0-01.

Note: If you have more than one active network adapter, you will see multiple entries here. Many laptop users nowadays have at least two adapters: one for the regular Ethernet adapter, and one for the wireless 802.11b or 802.11g card. Some computers will have three entries or more (for example, for either an infrared or a Bluetooth adapter). Sometimes it's easy to distinguish between the two (for example, one of them will say "wireless" next to "Description:"), but other times it's not (the description will give only a manufacturer and model). You may have to consult the manufacturer's documentation for your computer to tell which section of the ipconfig/all | more output refers to which network adapter.

Windows XP, without using the command prompt

Alternatively, in Windows XP, if you want to find this information and want to stay within the graphic user interface, or for any reason do not want to use DOS commands, you can find this information by doing the following:

1. Right-click the My Network Places icon, and then select Properties.
   
   
   
2. Double-click the Local Area Connection icon. Occasionally, there will be a number on the end (e.g., Local Area Connection 2); it depends on your computer's configuration. If you are looking for the MAC address for a wireless adapter, the icon will normally be named Wireless Network Connection.
   
   
   
3. Click the Support tab.
   
   
   
4. Click the Details... button.

The physical address (MAC address) and IP address will be listed in the window that appears.

Windows 95, 98, and Me

To check your computer's IP address or physical address, follow the steps below:

1. Click the Start button and select Run... .
   
   
   
2. Type winipcfg and click OK.
   
   
   
3. From the drop-down menu, select the adapter being used for your connection:
   
   
   
   
   
   • Select PPP Adapter if you're dialing in.
     
     
   • Select the Ethernet adapter if you're connected to a LAN or a broadband connection.
     
     
   • Select the wireless adapter if you're connected via wireless.

The IP address will appear in its labeled field. The MAC address will appear in a field labeled Adapter Address.

Alternatively, you may follow these steps:

1. Click the Start button and select Settings, then Control Panel.
   
   
   
2. Double-click Network. Select TCP/IP, then click Properties.

The IP address appears under the IP Address page tab.

Note: If you are using Dial-up Networking (i.e., PPP) or DHCP (campus housing at Indiana University Bloomington uses DHCP), the IP address is dynamically assigned by the terminal server, and Obtain an IP address automatically should be selected.

Note: You can use the Get Connected web site to register your Windows XP Professional, Windows XP Home, Windows Vista, or Mac OS X (10.3 and later) computer to use the IU network in campus housing. Computers running Windows 2000 or Linux, as well as game consoles, must be manually registered. For help, contact the UITS Support Center at IUB by calling 812-855-6789 or at IUPUI by calling 317-274-4357. You cannot register Windows 95, 98, or Me on the IU network in campus housing.

• Needing help- how to get IP address - Susan
  • Inside is a page I just copied with directions for - this from a Google search. Good Luck! nm PThru

The messages you are viewing are archived/old.
To view latest messages and participate in discussions, select the boards given in left menu

My biggest venture before my daughter became pregnant with twin girls was a ripple stitch baby blanket. No problem there, right?

I decided to do a a layette including little teeny sweaters for each.  The directions were a mess when I got to the sweater sleeves so I just put the directions up and went by instinct (as in, how would you expect it to look). The sleeves actually came out slightly belled on the bottom but the sweaters were adorable.

Keep in mind that crocheted is never as smooth as knitted. I can't knit because I am severely right hand dominant and my left hand holds the knitting needle and says HUH? :)

If wrong sides together don't look right, do as the poster below said, rip it out and try it the other way.

As my mom always used to say about sewing:  "As ye sew, so shall ye rip."

In defense of the North and South directions.  In the state I grew up in, you did not use directions of N, S, E or W.  It was you turn right or left.  I to this day do not know N, S, E, W when I an trying to find directions.  I have to tell people to tell me right or left, and I am no dummy.  I went to 3 years of college to get my degree in Medical Technology.  Please do not ask me what state, as I love that state, even though I had to move from there, and I don't want it bashed.

In defense of the North and South directions.  In the state I grew up in, you did not use directions of N, S, E or W.  It was you turn right or left.  I to this day do not know N, S, E, W when I an trying to find directions.  I have to tell people to tell me right or left, and I am no dummy.  I went to 3 years of college to get my degree in Medical Technology.  Please do not ask me what state, as I love that state, even though I had to move from there, and I don't want it bashed.

guidelines.  If URL does not work, the link is also included so you can paste and copy in your browser. 

If you hire an electrician, a painter, or a roofer (as examples of independent contractors), you do not tell them HOW to do their work or WHEN to do their work.  Just try doing so and see how many contractors you can obtain. 

Today, we have these large companies not only telling us how to do the work for which we have been trained, but when to do the work (specifically, what days of the week and what hours).  Certainly, the quality of the end product must meet the client's approval or the contract can be cancelled.  It cannot be cancelled on the grounds of not working specific days or hours each day to fulfill that contract.  If you sign a contract specifying you will produce 1000 or 1200 or 1600 lines per day and you meet that production, a client (the MTSO) cannot fault you if you produce the agreed upon lines in 4 hours, 6 hours, 3 days, 2 days, etc.  When requiring you to work a specified schedule of x number of hours producinig x number of lines, then it becomes employee-employer status, not one of client-independent contractor status. 

Also note the evalutation system below.  I would saying doing QA in evaluating a contractor's performance is an evaluation system.  Would you?  What about being  put on probation or fined (as some companies are now doing)?  Does that point to employee status?  Can you put a roofing contractor on probabtion or issue a fine?

And...just read the section on training.  An eyeopener for certain. 

Below are the guidelines.  I say we ICs start filling out the misclassified workers form.  If we are treated as employees, then we need tax relief.  If MTSOs provide employee status in some states and not others, AS WELL AS hiring ICs, then an IC cannot be required to adhere to the policies and procedures that their employees are required to adhere, and that includes WHEN the work will be performed and HOW it will be performed.  The guidelines are clear. 

I'm not afraid of broaching this subject for fear jobs will go to a third world country.  They are going there at a rate faster than the speed of lightning anyway, and nothing we as ICs or employees can do will stop it.  They are going there because it is a cheap, cheap way of doing business. 

***************

http://www.irs.gov/businesses/small/article/0,,id=99921,00.html

Independent Contractor

The general rule is that an individual is an independent contractor if (the person for whom the services are performed) has the right to control or direct only the result of the work, and not what will be done and how it will be done or method of accomplishing the result.

People such as lawyers, contractors, subcontractors, public stenographers, and auctioneers who follow an independent trade, business, or profession in which they offer their services to the public, are generally not employees. However, whether such people are employees or independent contractors depends on the facts in each case. The earnings of a person who is working as an independent contractor are subject to Self-Employment (SE) tax.

Evaluation System

If an evaluation system measures the details of how the work is performed, then these factors would point to an employee.

If the evaluation system measures just the end result, then this can point to either an independent contractor or an employee.

Training

If the business provides the worker with training on how to do the job, this indicates that the business wants the job done in a particular way.  This is strong evidence that the worker is an employee. Periodic or on-going training about procedures and methods is even stronger evidence of an employer-employee relationship. However, independent contractors ordinarily use their own methods.

Misclassified Workers Can File Social Security Tax Form
Workers who believe they have been improperly classified as independent contractors by an employer can use Form 8919, Uncollected Social Security and Medicare Tax on Wages to figure and report the employee’s share of uncollected Social Security and Medicare taxes due on their compensation. See the full article Misclassified Workers to File New Social Security Tax Form for more information.

Administrator
MTStars

When I worked for a national, up thru 2 years ago, I was getting $1.75 page and heard they got $4.

you've forgotten your own words! Your post above is 100% different "flavor" to it, now all positive and cheery! Your first post was 100% doom and gloom every which way, including "raining on your parade", and "if you want to go forward"...God, sounds like she's talking about jumping into oncoming traffic! Here is your quote:

My first boss (the one who hired me as a new grad) gave me some words of wisdom that I haven't forgotten. She said that transcribing at home with small children NEVER works under any circumstance. Either the work will suffer or the parenting will suffer.

****

How can the word "NEVER" in caps be interpreted in any positive way? You took about 8 paragraphs to cover every aspect and completely dash this poor woman's dream.  I'm not blind, I'm not talking about day care at all, I'm talking about the total negativity of your original post! You know exactly what I'm talking about, cause you added some sugar to your second version! And that's much nicer than the first!

Once the Macro is in place, you can add it to your toolbar by right clicking on the toolbar you want it to appear on. Choose customize (bottom of menu). Click on the Command tab and choose Macros from the left-hand side of the box. Find Normal.NewMacros.GetLineStrictCount from the right-hand side of the box. Left mouse click on that macro one time and hold the button down. Drag the command to the toolbar in the location where you want it to be. You should now see a large box with the entire name of the macro inside. Right click on that box for the drop-down menu to change the appearance of that button and you're in business.

I get paid gross line and from top to bottom of the page.  My rate is lower which is what the docs like and on chart notes just take the line count for word.  Kind of like your two lines on a page you get the page.  One word on the line, I get the line.  Also with my clinic notes, there is just one blank in between patients but I do get that line.  Of course I cut apart the notes for the clinic so that kind of pays it.  I also make good money and can't complain. 

You need to turn it around so the doctor feels he is "saving money" by being charged by the line and therefore for only the part of the page that is completed.  Tell him that if you charge by 1/4 of the page anything over 10 lines would be a mininum of $1.50 - 2.00  and so he would be paying for part of the page that would not be filled up.   The same applies if he were to go only 1 line past the 1/2 page mark and thus pay for the entire page.  So make it seem more economical for him.  Also make sure that you figure your line charge out in the font you want to type in and if he wants a smaller, convert it over to charge out.  As long as they know that a gross line -- which is what I charge -- consists of how many characters in the Courier 12 font in, you are not cheating.  But show him how it would be beneficial for him to do the line charge and don't go with an attitude of "my way" show him you are looking out for him.   I would probably start out around 12 cpl per gross line as you will probably get a lot of standards that you can set up, etc.   So if work up to 200 to 300 lines per hour that is very good pay. 

Patti

I know it really depends on many factors, but I was wondering if $1.30 per page is a good rate?  I haven't typed a per page rate in years and I don't remember!  This would be a psych. account.  This company gives a template (I get paid for the template lines).  I am thinking this seems kind of low.   Any help would be appreciated.

Oh, gosh...I almost fell over when I read this.  Maybe I missed something here, but when I had my own private accounts a few  years ago I was charging $5-$6 per page, which was actually low at that time.  The reason was that these docs were excellent dictators (hand-picked, of course), and $ wasn't an issue. 

I'd be interested in any other input.

Good luck.

i did a little different, added more

1 tsp salt, 1 tsp pepper, lots of paprika and lots of garlic and probably 1 cup of olive oil.  I had a lot of chicken to cover.  I mixed it all up in a bowl to wear it was pretty thick, not runny.  placed onions and garlic at the bottom of crock pot.  dipped chicken in sauce and completely covered.  It shouldnt run off chicken.  Placed in crock pot and dumped the rest of the sauce on top of it.  she said she cooked it about 6 or 7 hours i think.  It smells awesome!!!!!