If you change MS Word settings to
Posted By: blue background/white type, sm on 2008-10-26
In Reply to:
... do you have to switch it back to white background/black type when you send in your work?
I send my work FTP and wondering if I send it blue background/white type, will the MTSO get it that way or will it appear normally with the white bkg/black type?
I hear that using the blue bkg/white type eases eye strain, which will help me, and wondering if I need to change it back before sending it via FTP.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Do the settings stay if you change your Word, close it, then open it again without going to your pla
That would tell you if the platform is making the changes to your Word and, if that's the case, talk to your platform tech support.
You would have to change the margin settings.
Under Styles, find the List Number and change the hanging indent setting. This will then apply to all documents based on that template.
Change the settings in "wod" to do what exactly?
Now I want to know too.
MS Word grammar settings?
I would like to set up my MS Word to catch as many grammar errors as possible. Should I just check every box?
Thanks
Go into settings and emualte your WP to work as WORD with (sm)
the different settings and options.
In Word, I think you have to turn it off under one of the settings in View. nm
s
This isn't a Word issue. Check the settings in ...
your download manager. You should be able to specify the language there. If you can't find anything, let us know which download manager you are using.
There is a word macro that can change that
for you. Not sure if it will work on your platform, though. If you need it, just answer on here and I will post the macro so you can paste it into your program macros and assign a shortcut
Is there a way to change the default setting in Word - sm
for line numbering? It keeps indenting 1-2-3,etc. to the first tab and I need the numbers along the left margin. I went to <format>, <bullets and numbering>, <customize>, and changed the number position and alignment, and it lines everything up on the left margin.
However, if I have another numbered section in the report, it goes back to the default setting, indenting to the first tab.
Is there a way to change the default, or do I have to go through these steps for each numbered list?
Thanks!
How do you change display on Word template?
Does anyone know how to change the display to 100%. I have tried to modify normal.dot but no luck. Thanks in advance. 
How do I change incorrect spelling in Word?
I accidentally spelled a medication wrong and added it to the dictionary. How do I go about changing this? Any help would be appreciated. Thanks!
Wrong. Just up Word, change to 150% and close.
Word will save that setting to your Normal template. Now, open a blank document and you will see that and subsequent documents will be at 150%. Problem solved.
Word counts the blank lines between paragraphs unless you change
your paragraph style to double space when you hit enter. You need to change the "after" setting in the spacing section of the paragraph dialog box to the point size of the font you are using and click the Default button. You'll probably want to do this in a separate template unless you want this setting for all new documents.
Just open glo file in Word, highlight all, then change case and save back
to glo file. Use the Alt key trick to highlight just the column of words, then Shift + F3 to toggle through the change case commands. First save your glossary under a different name so you also keep the original.
Settings, Playback settings.
Increase or decrease the steps in Rewind.
Even 4.5 is too low. doctors do not change - they still hem and haw, change, change stuff along wit
It is just not enough for the work. Speech is great on the wrists but you are not just reading what is typed, you are making a lot of changes. I have a hard time doubling a lot of days with all the changes I have to make. Just my opinion.
Don't change. I had to change back to cable. SuddenLink DSL stinks! nm
nm
Change provider vs change to business plan
In your place, I would seriously consider changing providers if there were others available in your area, but I'd ask around about their service quality first. It may not be any better. If there are no other providers, then consider changing your service package to a business account rather than residential. They're usually more expensive, but they also tend to get faster service if there's a problem.
Last summer, I had no electricity for 3 days due to severe storms, but there were some 600,000 in the same boat with me. We just had to wait it out. It's a downside of working at home.
change attitude, change life
The first thing you need to change is that defeatist attitude! I know that's hard at times like this, but that's when you need to most.
I won't go into detail, but my financial situation is also at an all-time low, we couldn't even exchange gifts., daughter in hospital twice, & no med insurance)..but then I heard about how much worse things were for others around me this season. Now I'm thankful instead!
Get out while you can. Things will *never* change unless you change them. (nt)
Yes . . . it is under settings
Playback tab, then Auto-backstep on stop
settings
I am using Express Scribe, and I tried the settings and that didn't help. Thank you!
settings
Yes, I am afraid I did all of that. It keeps coming back and saying that it is not a supported file. Thank you very much for helping!
Under settings. sm
Click Playback tab. For Rewind, I have set mine to 500 and Speed at 150.
Try the Settings.
Under playback tab you can change the rewind. Mine is set at Step (ms) 500 and Speed (%) 150.
Go into Settings.
On the Control tab use the footpedal setup wizard to set what part of the pedal does what. On the Playback tab, you can change the backspace. On the
Have You Tried the Settings?
I haven't used Express Scribe since school, but have you changed the settings? I had to change it to change the settings for what food petal I was using. The one I chose was V-something (VEC? VRC?) 3-pedal, I can't remember.
It may have to do with your settings sm
under File, preferences. Make sure you don't have verify target window checked. Also, may be the pause....after so many keytstrokes. Play around with that one. Every body is different but what works for me is pause 5 msec after 1000 keystrokes.
Also, try waiting for the expansion to appear before you type the word after it.
And below, make sure you have simulate Keystrokes checked.
Settings....
On Exp Scribe, click on settings,file type, and if you don't what type of file, just check them all. Then give it a try and see what happens.
Did you try the settings on the
monitor itself. Mine has buttons to push to change the screen size and my old one had a dial. That's about as much as help as I can give.
Did you check all your settings and especially....
your password in OE? If so, is the Spamgard on in Yahoo so that it is keeping from going to your OE?
Settings, control and then where?
Settings, control and then where - can you help me?
Thanks so much!
Settings on my computer??? sm
Do you know how to check those? Thanks for your help!
see message for my settings. sm
variable speed 50 to 150
tone low frequency 1500
back step 1500
mode: constant
rewind: 500 and 150
forward: 500 and 150
I DID go into the settings and *told* it what to --sm
count. It was still very inconsistent and would not count headers, even though I *told* it to. I would count lines with it and then recount with Sylcount and Abacus was always fewer lines. This was just MY experience with it and I don't need to be made to sound like I am not familiar enough with these programs to not do the *settings* correctly. thank you.
it depends on the settings
I worked before for gross lines, but it depends on the margins and the font setup. I had one account that was Ariel 12 and the other was only a font of 10. With the 12 font I got more lines credited as opposed to the 10 font. Working at 9 cpl without spaces actually evens out to about the same as the lesser amount with spaces. You can download Abacus and then take a document you have typed and have it count it without spaces and with gross lines and then see the difference, it's really not that much.
click settings then...sm
under Playback tab, adjust the Auto Backstep on Stop (0-5000ms). 1000ms = 1 second.
Go to settings, then file and
it gives you a spot to put the number of days to delete files.
Control-settings....
Thanks so much - still having problems. Got the wizard to work on a couple of ports, but only to the push rewind pedal - then will do nothing - locks up and goes crazy with buttons on Express Scribe flashing continuously...any ideas?
Will do both, but how do I get those settings back?
TIA
Mine won't let me do that. Wonder if it could have to do with the settings? nm
x
Changing settings
You can change the settings. With your mouse on the main desk top screen, right click and go downto properties. Go over to the settings tab and this will give you options for changing the font size. You can change it in that setting by changing the pixel settings, or you can click on the Advanced button and change your DPI setting (or both).
Hope that helps.
I believe if you go into your settings while booting up. SM
On my PC if you push F2 or F8 during the boot up process it will take to your configuration settings. There will be an option that will be able to clear the password so that you will not be asked for a password anymore.
Yes, I had looked at settings, but I don't see how
to do that. My screen is stretched now, and maybe I'm looking at the wrong place. I dunno....I'm seriously challenged when it comes to this stuff....thanks for replying
Playback Settings for ES
Hello. You can go to the Playback Settings in ES and find the Auto Backstep on Stop heading. Mine is set to 1780 that allows for a reasonable auto backstep. You can adjust to your liking. Once you do that, go to "Control" and run the Footpedal Setup Wizard. That should do it! Best of luck.
Daytime 70, nighttime 65 for my AC settings. nm
..
In the settings, click the Incoming tab...
and then you can select file(s) for Express Scribe to scan. Then it will scan those and will load files automatically.
Did you try the Settings in Express Scribe?
The pedal controls won't work until you open Express Scribe, go to Settings/Settings.../Control, and select VEC Pedals USB or something like that; 3-pedals. Then, you click on "Foot Pedal Control Setup Wizard" and it will have you to press rewind, fast forward, and play. After that, the pedal *should* work.
I received ByteScribe with my USB foot pedal but I didn't like it so I uninstalled it and downloaded Express Scribe with no additional software.
If that doesn't work, I really don't know what to tell you. Sorry  .
Amanda
I could see much better but the settings slowed down my computer..sm..
I didn't have any trouble getting it back though. Hope you find something that works.
I didn't like what settings I chose (sm)
using Tonks directions so I tried changing back to the original settings and had a bit of trouble regaining them. Just a heads up for anyone wanting to try changing your settings using the wizard. You might create a system restore point before you make any changes so you can easily restore your old settings if need be.
Click on Settings and it is under the Playback tab.
x
|
