ICs - how much do you make per line and do you work for ...sm
Posted By: Poll time on 2007-04-16
In Reply to:
a large company, small company or have your own contracts?
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
I don't make 0.08/line.. I work for no less than .13/line. nm
.
I work for NTL and make .12 line
nm
The bottom line is doesnt matter what they pay if there is no work you make no money. Bottom line.
:
what? I used to make .02/line off my subcontractors work and felt guilty.SM
The MTSO is making .07 line off your work? I know you did not say how much you make, but the MTSO must be charging the client a high rate. Like I said, I had several subcontractors helping me as an IC for local clients in the past, and made .02/line on their work (I am the one who printed and returned the work). You deserve better and are selling yourself much too short! P.S. - Unfortunately this is what is happening to this industry, and it's called greed.
Yes, unfortunately you do have to make a pest of yourself to make it work, but.....
as the years went by that is why I stayed away from those type of companies. BTW, Noni is a fabulous product, I absolutely do not care for the "marketing techniques" they use. One of the facts of this type of industry is you cannot just recruit to make it, you have to retail. Ever since I "overhauled" my techniques and system...I never had to ask another person to some on board again. Well, nuf for now. Take care and have a blessed week!!
How much do you make a line as well.
That along with the dictators makes all the difference.
Have a hospital I work for and they consistently change work types and do line counts. (sm)
Management just doesn't understand in order to crank out the work you need to be proficient by typing the same accounts. Go figure, they just don't get it ??
Usually work "live" on a Cphone, while connected. There are ways to record & work off line, bu
s
Make an income on 0.6 a line?
Been offered an IC position for 6 cpl. Good dictators, header/footer, demographics, bold, etc. is counted, WP 5.1, and bountiful work. Too date, I have only worked for a hospital at an hourly wage and now for a service with benefits for 8 cpl. Not happy with the service so am looking elsewhere. Is this real, or can money be made?
I make .05/line on one platform and 0.04 on another
and I will take the 0.04 platform any day as I can get almost twice as many lph. Just like typing, editing depends so much on the platform that I don't think you can always just look at a blanket line rate to tell.
I make 8.5 cents per line sm
The incentive is 2 cents per line for anything over 300 lines per hour. That equates to 10.5 cents per line, because I consistently do over 300 lph. That equals minimum of $31.50 per hour. I would never work by the hour.
Per line - could never make much per hour.
I do 350-400 lph at 12 cpl - no one will pay me what I make by the hour! Per line is the way to go, plus keep your flexibility.
Make sure you use sm (see msg) or nm (no msg) in the subject line, too. nm
s
Don't most make more than 5 cents a line??
I do not agree with you at all!
right, make a little more per line, but also pay more taxes.
nm
You can make more than that per line, but at 125 lph, not a good living. Have to do at least 300 lp
x
...up to you to see if you can make more per line at home versus going
s
Is it possible to make a living off of 4 cents a line?
If there is anyone out there new and still considered a mentoree and able to work full time and make rent please tell me because I need some encouragement. I want to quit the day job to be able to do this fulltime but when I do the math it just doesn't add up to the rent:-)
Any words of encouragement would be helpful.
MI MTs who posted line rates, would you make
x
In WordPerfect, could someone please tell me how to make a line break
so it keeps the justification? Ctl+shift+L just moves down another line and does not justify. Thank You.
what do the middle people make per line?
I may be negotiating a contract directly with a radiology business, but I"ve only done independent contractor work up until now. I'd like to enter into negotiations seeming like I know my way around the block: what do companies (who hire transcriptionists) tend to make per line? How would I find that out?
How long does it take to make decent line count?
I am considering joining an outsourcing company. Can you tell me how long it took you, as an experienced transcriptionist, to get up to snuff that you were making a decent wage? And what is your average rate per hour when paid by the line of 65 cpl?
I guess so! I betcha make your new line count!! NM
.
I make 0.725 cents per line after 5 years with the same company - nm
I make 0.725 cents per line after 5 years with the same company - NM 
I couldn't screw this up any more if I tried! I make 7.25 cents per line. There! lol - nm
I couldn't screw this up any more if I tried! I make 7.25 cents per line. There! lol - nm
If you are paid by the line and make over $25 an hour, then I hate to say it
but I am wondering if you are doing full QA. By the line is NOT fair pay for QA. I know I mentor new MTs on a very difficult account and there is no way you could earn a decent wage on any amount of line pay, no way!
Don't go telling someone they could do better if they are paid by the line. Quality specialists MUST have ethics in their work. You can do a decent amount of reports a day and give feedback and mentoring, but you certainly would not be earning $25 an hour on line pay that I have seen....just no way! The most I have seen QA paid is 7 cents a line and still those women do not average that amount.
Now, I don't know what you do or if you listen 100%, but most QA positions I have had have had megablanks, 100% listen as well as 100% feedback and you just cannot produce that much doing your job in a proper manner.
Other than it really is broken a lot, you cannot make a decent line count on it.
It is a horrible disorganized program that is not user friendly like some of the other ones i have had. Sound quality has to be the worst of any company there is. Tech support is nonexistant for at least 6 hours to 6 days. Pay is horrible, especially if you get stuck on editing an account (about 4 cpl) Happy bankrupcy
RE: Other than it really is broken a lot, you cannot make a decent line count on it.
Your opinion is not shared by many who work at Transcend. I personally get all the lines I need using BeyondTXT and I think it is a great platform for transcribing or editing, and I do both, and believe me I have never gotten close to starving. Editing compensation is 60% of transcribing line rate by the way and my compensation is not 4 cpl as you so erroneously posted.
Do you have an unusually high line rate to make up for that?
.
make $20 an hour plus 4 cents gross line
nm
Yes, but didn't your line count double to make up for it? SM
I love EditScript. My only problem is that--reportedly--the profit margin for the MTSO can be very low, encouraging them to send it offshore. Does anyone else have information on this?
Cherrypicking didn't make our line rates less -
the lower line rates are what started people c-pickingin the first place, so they could make enough each week to live on. Back when I was paid by the hour (and lots more than I'm getting now per hour, I did whatever came along. But I'm sorry, I'm not gonna GIVE an employer a chunk of my change for the 'privilege' of doing a 40-minute report by a gum-chewing ESL with static on the line, partying nurses, or crying babies in the background, that I just plain can't understand, when I have the option to choose something that is at least transcribe-able.
Oh please, somebody tried to make me feel guilty for leaving a horrible job using this same line.
How much $$ it cost to train ME. Like I should feel sorry for the company who basically misled me every step of the way regarding hiring, training, accounts, etc., etc. The job was a horrible fit, and I stayed way longer out of guilt. Not worth it! Conditions are deplorable enough for the MTs right now - we don't need to now assume responsibility for how much or how little a company spends to train us. PLEASE!!
WHOAH, Nelly!! Make that 0.0725 cents per line! - nm
WHOAH, Nelly!! Make that 0.0725 cents per line! - nm
No - not worth 12 bucks an hour when you can make triple that by the line, sm
but that all depends on what company and VR platform you are talking about.
not a liar, not an old person, I make waaaaay over $20/hour, probably double (CA, .15-.17 line) sm
I have two accounts of my own and do vacation coverage for a few other MTs as well as occassional work for a lawyer and a psychologist. I charge .15 for one clinic and .17 for the other clinic... clinic #2 is a husband/wife neurologist team, and the husband was a major A&& at first... with a very strong accent and every possible bad dictator habit you can imagine. I told wife I would transcribe for her, but not for him, I had plenty of business. She said charge whatever you want, have whatever turnaround time you want, just please don't leave. At the time they were at .12... so I upped them to .17. That was 5 years ago and now after having gotten to know him and his *quirks* I adore them both. I am an IC, but they give me very large gift cards for Christmas, kind of in lieu of a bonus, I guess.
Clinic #2... just this week took on another physician and I told them point blank it was too much for me to provide quick service and they may want to consider a service. They said no way, we changed the turnaround time to one week with stats as needed. I even asked them if they considered voice recognition and the office manager laughed and laughed.
I am just now putting both clinics on digital, and after the initial cost, this will increase my estimated hourly wage as it will take away my delivery time and cost, and my paper and ink printing cost and time. Though I still plan to visit each office on a regular basis for customer service and because I know my customer service is what got me here in the first place.
For the *occasional* work, the lawyer and pysch I charge $50/transcription hour.
I know you will all doubt me. But I work extremely hard, have put in my time with my education - not just learning MT but learning the ropes of running a business and how to do everything smarter, faster, and in the most efficient and sensible way possible. I also have another business I do in a totally different field! I am very blessed. Well, I also know the fields I have chosen were perfect for me, and also I've had good luck. You know what I think though? I think my sense of humor and just being as honest and open and observant as possible has made this possible.
I make that much and work...
for a hospital, from home. My colleagues at the other hospitals in this area also make in that range as well.
I work for 2 companies and make
0.0825 cents per 65 character line with spaces at one and 0.10 cents per 65 character line with spaces at the other so it just goes to show it varies.
Depends on who you work for as to how much you make..
The first online company I worked for, unfortunately, found out later they were India-based. Anyway, I work in Escription and made SQUAT. It would take 12 hours or more to make $100. Now, I work for another company that uses Escription and I can make up to $26 an hour doing VR. I think these companies set something up in the line count as how to count it and also it depends if they pay for headers, footers, etc. I definitely got ripped off the first go round. I like the company I work for now and like Escription. You can make money on this platform, although I am paid more than 3.5 for VR. That is ridiculous.
I need computer help. How do I make PRD work
PRD is on my old MQ program, but I can't seem to get it moved over to my Microsoft Word page. I can't seem to get my Stedman's Spell check over there either.
Help.
How much do you make per year doing MT and do you work PT/FT and
for a company or have your own clients? Just wondering how I compare. I work for both and made just over $24,000 last year.
I work at MQ, live in MI and make less than 10.5 cpl.
x
Make Word 03 and 07 work together!
First of all, I appologize for the LONG message, but well worth reading if you use Word. I asked this question on the Microsoft Discussion Board on 11/7/08. Here are the posts:
>>>> DeviousRedBaron wrote:
>>>>> I am running Word 2007. For work, I download a template created
>>>>> in Word 2003, then type my document in Word 2007. After this, I
>>>>> have to import header/footer info that I believe is created with
>>>>> Word 2003. This takes a long time and at the bottom of the screen
>>>>> the message "Word is replacing ..." appears. Is there any way I
>>>>> can speed this up, or avoid it all together? I love Word 2007 and
>>>>> would like to continue to use it. I do have Word 2003 also. I
>>>>> cannot change the info that I have to download. I access it
>>>>> through the intranet and it is different for each report. (I am a
>>>>> medical transcriptionist.) Speed is important in my line of work!
>>>>> Thanks in advance!!!!!
>>> "Graham Mayor" wrote:
>>>
>>>> You will need to tell us more about the importing of the
>>>> header/footer. How? From where?
>>>> What is the exact sequence of steps used to create a document. At
>>>> what point does the message appear?
>>>>
>>>> --
>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>> Graham Mayor - Word MVP
>>>>
>>>> My web site www.gmayor.com
>>>> Word MVP web site http://word.mvps.org
>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> DeviousRedBaron wrote:
>>> Hi Graham,
>>> I open my transcription program (created by the transcription
>>> company that I work for) and download my reports over the intranet.
>>> These are voice files and .doc information (that ends up in the
>>> header/footer). I double click on the report I want to type up and
>>> a template box pops up. I choose the .dot template that I need and
>>> it automatically opens Word in compatability mode with part of the
>>> header/footer info already in the document. This is usually the
>>> hospital/clinic address and phone number, or what ever info that
>>> particular company has requested. On some reports, there are
>>> headings that are loaded into the body of the document as well.
>>> This process is usually pretty quick, depending on my company's
>>> server.
>>>
>>> Now, I type up my report in the body of the document. When I am
>>> finished, I have to apply the demographics to the document. This is
>>> the information about the patient, clinic/hospital numbers, doctors'
>>> names, cc info...that is also downloaded with the report from the
>>> intranet. Some of this info goes into the header/footer as well.
>>> Some of this info is "attached" to the document so it is sent to the
>>> correct departments/doctors.... Once I apply the demographics, I
>>> have to wait for Word to replace .....something. (The message on
>>> the bottom of Word flashes from a long message to a short one very
>>> rapidly, making it impossible to read the entire message!)
>>>
>>> I have read a little bit about writing a code (macro) so that
>>> everything opened with Word is opened in 2003 format. I do not
>>> start Word, it opens with my company software, so I never get to
>>> choose a template in Word. I have also tried to set the
>>> compatibility for all documents to 2003 and this does nothing.
>>> Also tried to set it up to save as a 2003 document, as well as a
>>> .dot and this does not make any difference.
>>>
>>> I am at a loss! Thanks for your quick response, it is greatly
>>> appreciated!
> "Graham Mayor" wrote:
>
>> It is the application of demographics - presumably by a macro that
>> appears to be the issue. This was obviously created by the
>> transcription company with Word 2003 in mind. Whether it would be
>> possible to improve that code is impossible to say without seeing it
>> - and really that is a job for the company that provided it, so I
>> will stick to attempting to make the function use Word 2003 rather
>> than 2007.
>>
>> http://www.gmayor.com/Toolbars_in_word_2007.htm demonstrates how to
>> set Word 2003 and 2007 to share the same platform without
>> reconfiguring the registry each time one of them is run to grab the
>> shared settings for itself..
>>
>> You should then be able to associate doc and dot files through
>> Windows Explorer > Tools > Folder Options > File Types - DOC >
>> Advanced > Open > Edit and change the application used to perform
>> the action to Word 2003, which by default should mean entering
>>
>> "C:Program FilesMicrosoft OfficeOFFICE11WINWORD.EXE" /n /dde "%1"
>>
>> in that space.
>>
>> Repeat for DOT, though this time edit the action for NEW - the
>> application used to perform the action should be
>>
>> "C:Program FilesMicrosoft OfficeOFFICE11WINWORD.EXE" /n /dde
>>
>> and the DDE message should be
>>
>> [REM _DDE_Direct][FileNew("%1")]
>>
>> In both examples if Word 2003 is installed in some other location
>> than the default shown, change the paths to reflect that other
>> location.
>>
>> --
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> Graham Mayor - Word MVP
>>
>> My web site www.gmayor.com
>> Word MVP web site http://word.mvps.org
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
DeviousRedBaron wrote:
> Thanks so much, Graham!
> I have followed your instructions, but have not yet tested it with my
> company's software. I am going to test it out tomorrow. If there
> are any gliches, I will repost. If all goes well, would you mind if
> I pass this info on to my fellow MTs? (Medical transcriptionists.) I
> am sure there are numerous woman, and a few men, who could benefit
> greatly from your advise. I will await your response.
>
> Once again, thank you!!!!!
If it works for you, feel free to share with your colleagues. If double
clicking a doc or dot file opens Word 2003 and not 2007 it should work with
the company software - depending on how the company software calls Word.
--
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP
My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
I hope this will help everyone! I know it helped me. I love typing in Word2007, but for now, I will have to type in Word 2003 until my company's software is compatible with it. At least I can have both programs running at the same time! The info on his web page about creating a toolbar is not necessary, unless it is something you need to do for Word 2007. 
I have NEVER seen another line of work like this!!! sm
I'm not a spring chicken, and I'm not naive, and I've been in this business for "only" a mere 12-13 years. I'm sure there are plenty of MTs out there who will tell me I don't know what I'm talking about, for this reason.
However, I've been in business for myself in other lines of work. I can honestly say I have never seen such a negative, oppressive, self-denigrating line of work as this.
I don't know a single other profession where it is NOT acceptable to find coverage for yourself (yes, at the risk of losing your client) so that you can get the rest that every human deserves.
Again, this individual TRIED TO GET COVERAGE and the client will not LET her. You are preaching to the choir!!!
Unreal. Just unreal.
As for rates, for most industries, if you know where to look, you can find them. The Internet is a big place.
You might want to look into another line of work.
I won't work per line. $15-19/hr
Are you going into another line of work?
Their pay is way low and you work like a dog to make minimum lines.
x
Hard 2 make money with no work.
I can flex some, but I cannot make up an entire day of nearly no work!
:-( They do not want any excuses as to why people cannot work, but those of us who are here and WANT to work have nothing to do. Really makes me feel loyal to them, 'ya know????
not stretching. I work about 12 hours a day and make--sm
on average of 3500 gross lines a day. disbelieve if you want, but my money is in the bank. It is possible if you want to do it badly enough. ppfffttt.
|
