I operate the joystick with my foot if it is on the floor...
Posted By: i_am_mtheaded on 2006-10-30
In Reply to: Curious about foot pedal too. sm - Anon
If I am reclined, then I can still do it with my feet by placing the controller between both feet and using either to hit the joystick. I personally do not use rewind or fast forward ( I just use the auto backspace), but you can use the other buttons on the controller as fast forward and rewind.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Thanks! Called Help Desk. My settings somehow ended up on Joystick and not pedal. Go figure!
dd
OPERATE ON THE TAPES!
May sound silly but I did this a couple of times - to which was greatly appreciated by the doctor who would have had to redictate!
I just chipped hole in cassette where the tape passes through to the spool, put a tiny piece of scotch tape on the end of the tape, tapped it down onto the spool and carefully rewound the tape onto the spool. And of course threw out the tape when done transcribing it...
Since this is happening to you a lot though, a better solution would be to tell the docs NOT to dictate to the end of the spool, but of course that would REQUIRE COOPERATION on the part of the dictator, so probably nevermind. :)
MDI-FL was bought by Transcend, but they still operate
separately.
operate is to perform surgery -
procedure is more like EGD
ISP is DOWN!!! Dial up modem is too slow to operate
Well, this is really something. For the first time since being at home, Comcast is down.
Dial up modem is too slow to register my keystrokes and I get kicked off the hospital's system (which is 3,000 miles away).
I do believe, after experiencing this, that technology is going to be the determining factor in outsourcing. I used dial up modem for a clinic when with MQ but it was only a few hundred miles away from me and worked just fine. Could it be that the farther away you are from your account, the less optimal dial up modem operation is?
Can you imagine what would happen if all accts were linked to a foreign country and the server went down?
This event led to a 911 emergency as I was only MT on my acct scheduled to work today. I am actually shaking as I know how important it is to get the radiology work done in two hours.
Just had to share this with you guys.
They operate under the guise of the All American Company
With seminars for management, cheering, singing, praising the American way when in actually, they are going to suck every dime out of the pockets of this country, steal jobs and leave us without an income to pay for their products.
They are EVIL!!
OMG! Footpedal will not operate. Winscribe. I can hear dictation
when I click on the arrow for "play" but my pedal is not registering. Tried a different pedal and the same thing! Have a call into the Help desk but I am panicking!
Anyone have any idea would could possibly be wrong???? I have very rarely had foot pedal problems.
Check your USB drivers. The printer works off the printer driver. The pedal needs a joystick
driver in order to work. You have to configure your USB port for this.
It's amazing we let people operate on us who cannot put two words together to make a sentence.
:+
Here in North Carolina they get to operate a motor vehicle at age 15 when accompanied by
a licensed driver. No, they do not state WHO has to be the licensed driver (i.e. friend, neighbor, etc) or how long the licensed driver needs to be licensed, but at 14.5 years they start driver's education in the schools! It is ridiculous to me, as they are children operating a very dangerous toy and I pray they up the age before my children reach it, as I do not feel children possess the maturity and forethought to drive at such a young age.
New mow floor wax?
This doesn't sound like medical words....any ideas?
Floor damage
I know a lady who sold flooring for years. She advised me never to use rugs with rubber backing on vinyl (sp?) floors for just this reason. We never went into how to repair the damage if it happened, though. You might try calling someplace that sells and installs floors.
med-surg floor
Medical-Surgical floor. The hospitals I worked when I was working in a laboratory would have it as Medical-Surgical Unit/floor.
Picking my jaw up off the floor
I thought Chris would win it all! :(
ok, got it - you were on floor laughing *LOL.nm
 
Oh man! I'm rolling on the floor here! Tooooooooo
funny!!!! Isn't that the truth though about the name spelling? I have one that says, "Last name is Doe. Now let me spell that for you, D-O-E," but if the last name is Tatarczuk, you should be able to figure that one out on your own.
I have one that actually takes time out once in a while to spell a medication and he screws it up every single time. He's very condescending and his attitude is like, "Here little uneducated typist, this is how you spell doxicyclene."
I should keep a log of is misspellings just for giggles, but who has time?
Thanks everyone, now that I look more at the floor, its a vinyl I guess -sm
so linoleum was probably the wrong way to describe it. Just hoping I can clean it so in the future whenever we sell (in a few years) we won't have to put in a new floor....will use tile next time though so I don't have this same problem. Another alternative is to cover the whole floor with the rugs and make it one uniform stain (then no one would know!).
As soon as I pick my head up off the floor,
I will tell you that I agree about momentary help, but not lifelong help due to dumb choices. Maybe you could sign up for a free govt anger management class. As for the money spent in "stupid Iraq", just wait till you see what this country is like after Islamofascists turn it into another middle eastern country, complete with daily suicide bombers and a dictator rule. You may not live along enough to see it, but that's their goal. Count on it. Being nice won't make those nuts go away. It didn't work with Hitler and it won't work with these sickos either.
med-surg floor. It's not a proper name. NM
xx
But the paper would be stuck to the floor. . .
because someone spilled Kool Aid and didn't bother to wipe it up.
Red Kool Aid.
My cat sits on the floor right next to my chair
staring up right at my face, sometimes for hours, and if I don't realize she's there she will meow. How annoying is that! She loves to play and fetches her toy mice and brings them back like a dog. So I think maybe she wants to play but I can't get it through to her that mommy is working and I feel bad! :) Any pet psychologists out there? Help! lol!
Falling ON the floor with that one! LOLOL!!!!
X
Laying down on the floor with my feet on the
s
stained bathroom floor/IDEA
I had a similar situation with my "old" tile and a rug staining it.
I sprinkled Oxiclean/hot water mixture over a small part, then sprayed it again with very warm water...waited 10 minutes, went back in and the stain was very easily wiped away. Hope it helps on yours.
I only use the good ol Oxi with 5% carpet shampoo and you've never seen carpets cleaner  ..Hope this works for you.
thats all good in theory....calling the floor sm
getting the numbers, dialing into the system, etc. etc. In a perfect world! These docs are not going to do that.
MTSOs are hired to provide a service. They do whatever they have to do to provide that service. I have also had the experience you have had working in the hospital system where turnaround was never met by the MTSOs. MTSOs were hired because turnaround was never met by the hospital either.
Do you ever wonder that these problems with turnaround both on the hospital side and the MTSO side is one reason that outsourcing got started???? Please don't flame me for that statement but I guess if the MTSOs are not going to be able to keep up with turnaround then they have to do whatever they need to do to stay in business. I don't agree with it and I wish it were outlawed, but its just food for thought.
Calling in on the weekend and listening to a dictation may work in a smaller hospital, but I don't think its a very good solution for a huge major medical center, at least not for very long.
From what I see on this board it's ok to bash those of us who ARE flexible and make it work. But it is not "politically correct" for us to say anything about the folks who want to work for MTSOs and not facilities, but don't want to be very flexible in their working hours. Just an observation.
A little 3in1 oil or WD40 might help, too. But protect the floor/carpet underneath until the oil has
s
Got floor model of chair that was perfect fit. Final mark down was $40. Went got home saw original
:P
Foot pedal? Going from VXP to applying for other companies. What foot pedal should I get that woul
I need one even just to test so it seems. Thanks for the input!
Where do you buy foot pedals for your transcription. Who has the best foot pedals for sale.
:
Can anyone tell me what foot
I have two and would rather not have to buy another if I can avoid it. TIA
I did it too, and now can't use my right foot
You really have to put your foot down.
I have had this problem in the past and just told people, including my kids, I get paid to type, not to talk. Unless there's a large emergency - a lot of blood, the house on fire, etc. - DO NOT BOTHER ME. For all intents and purposes, I am not home. It takes a while, but eventually they get it. Have a virtual wall around your office and tell them it is off limits. Good luck.
What is the best foot pedal?
What is the best foot pedal to have? Which one is the easiest to set up and use and can be used with different files? I already bought one but can not get it set up to be able to use. Bought from Expresscribe to use with their program and have had no help. Brought in a computer guy. No help. So I am stuck with this pedal and can't use it. I am now looking to buy another one. Any recommendations?
FOOT PEDAL
It is a USB port pedal. It wasn't so much as they would not help me, I got aggravated waiting 2-3 days in between e-mails and trying things that did not work. It has something to do with no driver. So now I am looking for a universal foot pedal to make it easier for me to find a secondary account.
One foot in front of the the other sm.
Oh honey please run don't walk, right out that door. This man you live with is only in your life to beat you down with discouragement and lies. Please do not allow this to continue. You were created by one who counted the hairs on your head, is the God of the universe but he knows you by name. He did not make you for destruction but for good. Please take your children away from a person who would put them down, call them names and does not care one bit about their well being. Begin to look at yourself for the wonderful, divinely created queen that you are, you have purpose and potential and this man is only there to keep you from seeing it. The day you walk out the door and shut it a ton of weight is going to fall off your shoulders as you will begin to realize that he does not love you, he does not love anyone but himself. You have to show your kids that you love them too much to let anybody (even their own father) treat them as less than great. You are a woman and deserve to be cherished, protected and provided for, anything less is not acceptable. Please go and as you do please know that myself and I am sure many other people out here are praying for you and lifting you up. We stand in the gap for you!! Now go girl and don't you dare look back. Go and be fabulous!!
foot pedal
I have a converter I bought from Radio Shack - I have one that converts USB to 9 pin and another one that converts 9 pin to USB
Foot pedal
I am working for a company, renting a computer and foot pedal. I discovered I could use my own computer so want to send their equipment back. Their foot pedal is a 15 pin pedal. I have a 15 pin pedal of my own, looks identical to theirs. When I plug my foot pedal into the game port on their computer it does not work. I need to know what I need to do to my own foot pedal to make it work on the game port on my own computer. I am so technologically challenged. Does anyone know what I need to do?
Foot Pedal
If you are using express scribe then change the port option inside change the port options. If you are using game port then click on the game port options inside. Hopefully it will work.
In need of 9 pin foot pedal
If anyone has a 9-pin foot pedal for sale, let me know. Thank you!!
Foot pedals
When I was a C-phone user, I had to buy a couple replacements. It was too costly to have a repairperson repair them, and instead it was best to throw it out and buy a new one. It used to be we could open them up and clean the CONTACTS.
in-USB Foot Pedal
I am a recent graduate and looking for a job. In the meantime, I want to be sure I have the right equipment. I have a standard cassette transcriber with foot petal, but have been told that I should have something that works directly with my PC (mine may be outdated). Do I need to purchase software if I buy an IN-USB foot pedal? The equipment/software requirements are a bit confusing. Any information would be helpful. Thank you.
Foot pedal
Sorry. Don't know of any free one to download. If you haven't already, you can go to your Express Scribe screen, click on Help, then click on Foot Pedal control. It has a lot of information that might be helpful.
foot pedal
You can download the free Express Scribe software to download dictation files. I have used Express Scribe with my Infinity 9-pin serial port foot pedal and it worked just fine. I purchased my foot pedal on ebay so it wasn't that expensive because I was just starting out. You should not spend a ton of money on foot pedals in the beginning until you get a job and know what program the company you are working for uses. Not all foot pedals are created equal. Some programs require a certain type of footpedal.
foot pedal - sm
Thanks for your reply. I am not very technical when it comes to these things. So what you are saying is that in order to use Express Scribe, you have to have a 9 pin serial foot pedal? If so, I will go on ebay and try to get one since I need to test for several companies..I have never tested on line before. Thanks for your help.
Lucy
foot pedal
I'm not the most technical person either, but you can use a USB foot pedal with ExpressScribe. I will try to include a link here to a USB pedal that shows what it works with, will not work with Dictaphone ExText. I think my choice would be USB. I do know there are a few companies out there that do require a 9-pin pedal only, but I think things are moving more and more towards USB. The lap top I just bought doesn't even have a serial port, you have to buy the docking station to get one, although I think sometimes you can use some kind of adapter. I have used USB pedal with ExpressScribe to test on it. The technical board is a good place to ask questions, too.
I had to buy a foot pedal....sm
but that is pretty common in companies who do not supply the computer. I don't remember it being that expensive, though, only around $100. What are they asking you to pay for?
foot pedal
Never worked with wav player before. would a lanier foot pedal work with express scribe program (as a foot pedal) instead of the million $$$ one that I can't afford. Downloaded program but "Hot Keys" on keyboard is making me nuts. Need advice. Thanks.
Could be a bad foot pedal
This happened to me after I reset up my system after remodeling. I brought in all kinds of repair people. After my DH took the foot pedal apart, it was found that the pedal was just worn down where it connects when you press down.
foot pedal
I thought InScribe was the software. I'm very ignorant when it comes to this stuff. Will Express Scribe work with InScribe? what kind of connection do you have at the end of your foot pedal. Mine is a USB.
9 pin foot pedal help
I have used this pedal before on my computer before, it has just been a long time. I have expresscribe, can't get the pedal to work. I'm sure it is just a setting or something simple. Any suggestions?
foot pedals
If the footpedal setup wizard doesn't work it may be that your 9 pin port card has been setup to do other things (maybe games?). You need to get the driver for the card (perhaps the driver CD is lying around somewhere) or get a nerd to update the card's driver. Port settings can also be a problem. Sometimes it's just easier to switch to a USB footpedal!
You could also try Port 1, 2 etc in the settings, running through the wizard each time and see if that helps on one or the other of them. Another possibility is mechancal, the cable/socket may be damaged.
scribalerror
|
