I have this & speed can vary sm
Posted By: HappyFlaMT on 2009-05-28
In Reply to: Does anyone have wireless using a USB modem? sm - CrispyCritterMT
I also have the 727 with Sprint and also another card for my laptop so hubby can be on it while I'm working. I worked for a company where I had to log in to their VPN system, and there were times I would lose connection because my connection speed would dip down too low. However, I am about 1/3 of a mile outside the official coverage area and have to use an antenna to get a good signal, and this may or may not be the case with your connection. I have also used my USB card for the Bayscribe system and just started with Keystrokes using DocQScribe with absolutely no problems at all.
Complete Discussion Below: marks the location of current message within thread
The messages you are viewing
are archived/old. To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
This will vary depending on dictator style and speed, but the average to shoot for initially shoud b
around 3 times the length of the dictation. So, if the dictation is 5 minutes long, you should be able to complete the transcription in roughly 15 minutes. Again, that can vary, but it's a good rule of thumb to go by.
increase speed 3, decrease speed 2...sm
increase backspace 9, decrease backspace 8. At least that's what mine does.
yes it can vary
Some don't pay for underlining or bold and you really don't notice these things because they are out of sight and out of mind. We assume that a rate per line means everything in the entire line, but it doesn't. I recently used Abacus and counted by gross and two other ways and it sure can vary.
...may vary (was cut off) (nm)
x
Does it vary by state? usually something like 23.
x
It probably does vary between accounts.
Problem in MTSO's don't want MTs to know exactly what they are charging. So MTs get a flat rate. It's not fair.
opinions vary,
but i don't think so. but in this day and age, i think you are wise to have more than 1 skill up your sleeve. i think the pendulum will swing and we will realize that a thinking person is better than a machine, tho some adapting may be necessary and that shipping work overseas isn't the smartest solution either. i suspect you'll esp find ample work in the big city.
YMMV (your mileage may vary)
>>>Who are making more money with VR than you did with straight transcribing?
Depends upon the day.
>>>If so, how many LPH did you average when doing straight transcribing?
About 250 lph.
>>>If not, how would you rate the difference, approximately in % of income lost
When VR is "kicking booty," I can get close to 400 lph with around 99% accuracy. And that's just straight dictation. If I knew how to do macros and templates, I could probably get close to 500 lph. --- But it didn't happen overnight. I started using the product again in November 2002 when I busted my finger. When it's a matter of spending the time training the product correctly or not working at all, you find a lot of patience.
LOL! Accounts vary, I guess. SM
I have typed on one where they don't want them capped, and it bugs me every time. :)
It can vary widely so I'm not sure there is a baseline.
Some companies pay per line, some pay per hour. Hourly is the best way to go. The per line rate can go from 2 to 5 cpl, hourly $10 to $15. Figure out what your hourly rate is doing transcription and you'll know what to ask for. Generally QA people make less than MTs, but you wouldn't want to take a cut I don't think.
goes to show how much our experiences out here vary... Everyone comes from a different POV
What you can do per hour can vary WILDLY
I have some accounts I can crank out lines on and hit 1000 in 5 hours easily. I have another that can take me nearly 8 hours because of being 90% ESL (really bad ones to boot!) and really tedious account specifics. I have been on this platform for 6 years and have expanded to the max. It can just depend on the accounts you do! :-)
Yes it can vary, that is up to the MTSO how they want to pay/bill - sm
I used to work for one that billed out as a line being 60 characters; she also had another account that was 50 characters (which gives the Dr. the impression they are paying less as the rate is .10; which is actually .13/65 char). This was a smaller MTSO though, all the larger companies I have worked for have all been 65 char/line.
Seems to vary by company. Mine seem to
s
Reports vary so much it's hard to say
It really depends on what type of reports they are, as well as your platform. I just started doing radiology and man when I think I am really rocking, my report numbers are up and my line count is down. Like you, sometimes when I'm really strugling with those long complicated MR reports and feel like I'm stopping every five seconds, despite myself I'm typing more lines. I feel it's because the reports are so long.
Basically, I live by the axiom that anytime you have to take your hands off the keyboard, it costs you money. Period. That's why people talk about the "good old days" of WP51 and straight Word (not Word-based platforms) where you could keep your hands where they belonged and not fiddle with the mouse all the time or wait on the platform to catch up to you.
Sorry I don't have more answers; perhaps someone who keeps better records than me will be more help! :)
As you can see, experiences vary very widely SM
But--It's the future, so leap in! Figure out every way technology can do the work for you much, much faster. Start programming your corrections into your Expander from day 1. All of them. Not just a few main phrases, but virtually every word within them and every possible variable. Program in all your punctuation corrections. Like changing ". He " to ", he" and vice versa within at most 3 keystrokes. You'll do it all day long.
It's true people are making less in general these days, but any time I hear of people still being able to support themselves fairly acceptably I pretty much know they're still typing out most stuff out the looong way. Alllllllllll of it alllllll day looooong...... That's really sort of analogous to people who refused to learn word processing, insisting on staying with Selectrics and Liquid Paper. Back then, like now, we upgraded our skills or went broke.
And if you don't already, practice reading fast until you get that skill up there. There's a lot of reading to this.
Don't bother fussing about what a mess VR can make of some dictation. All that counts is what income you can make from cleaning it up. (Tho skimming through reports that just need a slight buffing IS a pleasure.)
My last thought is that this business is in flux, and it's true some companies are not paying equitably for this work. Yes, a greatly increased pool of skilled workers for each good job does mean pay has gone down for MT overall, but if you feel you're producing fairly well compared to others in your position and your income still has dropped signficantly over what you earned doing transcription, you need a better company. OTOH, if you've worked hard at developing these new skills and can't seem to do decently, it may no longer be the field for you. Either way, plan on being ready to move on if necessary. Don't wait many months to figure it out. Best wishes!
As a for instance, 225 lines/hr at 8 cpl would be $18/hr. Your mileage may vary. nm
a
Line rates vary geographically.
I wouldn't work for less than 0.08/65-character line that included spaces. If you're traveling, printing, etc., charge more. Tax advice should come from professional tax preparers, not this site. Also check IRS website.
Plus, line rates vary by company
depending on the account. I told someone how much I made, she got a job with the same company on a different account making less $$.
Plus, line rates vary within the company
depending on the account. I told someone how much I made, she got a job with the same company on a different account making less $$.
C-phone speed help! PLEASE! Speed key!
I am in tears - typing speedy gonzalez - a total knee replacement, not a standard, dictated in under 1 minute - FULL REPORT! Can you imagine? I have a C-phone that is just hanging in there, but lost all its programming. Isn't there a # key on the number part of the phone that reduces speed? I need it way slooooooooooow!! I'm afraid to just start hitting numbers, though, cause I've lost reports that way!! Anybody have a # to hit for me???
Speed when it comes to DSL
I would love to cut my bills, with my DSL carrier have to have land phone in order to have internet. I do both VR and straight typing, mostly VR. Has anyone had any issues with similar, using the fastest DSL (which costs more) and then going to the lower rate (which costs less). I might be interested if I can find is there really that much difference in your speed?
Probably will! Maybe we could speed it along - sm
by sending the link to our local TV stations!
speed
your processor is what adds speed or diminishes speed. being as that your computer is 4-5 years old, your processor probably just cannot keep up with the expectations you have of it. With increased files and using an online platform, you probably need an updated processor. Also depends on how much you have *open* at the time of working on the online platform.
Speed
Definitely have to have a split keyboard. My wpm went up considerably with the split keyboard plus your hands don't get as tired because it is in a more natural position.
Speed
I have found that timing myself with a stopwatch makes me get more done. Otherwise, I take my time and then I do less work. I make a limit for each transcription, and then I try to beat that time.
Abby
Speed
what speed do you all keep your dictations on? normal or chipmunk style?
I did this, what did it say your speed was?
It said mine averaged 180.
speed it up
I am in the same situation. My computer is fine, just slow, and I don't want to buy a new one, especially not with Vista. I bought 1GB of RAM from an ebay seller (new) for $35, watched a YouTube video on how to install it (super quick and easy), and now it is running a lot faster. I also ran a Scan Disk and Defragmenter to clean it up. I had hundreds of thousands temporary internet files that got cleared out.
MT'ing isn't all about speed, although...
of course it helps to type fairly fast. However, there is sooooo much more to it than just typing speed.
That being said, my own speed without using any text expansions isn't nearly as great as some mention here. I tested using expansions recently and hit well over 200 wpm. Thankfully, I am able to use a text Expander while working . . . otherwise I might starve to death.
how to test for speed ?
is there an online test we can take? I'd love to take one nowadays ... it's been a while since I have !
JoJo
How long does it take to get up to speed at a new job?
Also, which is better, acute or clinic? I can't seem to get my production up to where it used to be. The reports are super short, about a minute or less. The header info is a tedious process of checking this, checking that, verifying everything. I don't know if this is going to work out, but I can't afford to be changing jobs again this close to Christmas. The work itself is super easy.
Had a speed-demon doc whose
nurse, whom I could hear in the background, asked him, "Geez, how can they understand you when you talk so fast?", and he replied, "Oh that's they way they like it!" Wonder where he got that idea? At least he talked to her so she could understand him...LOL.
speed typing
Okay, ladies. I have been working for 8 months now as an MT and my typing accuracy still is lacking quite a bit. I have the typer shark program that I use sometimes. I type about 50 WPM. Not good enough for me. I was hoping that somebody could give me suggestions or hope that it will come with time. I seem to be a little bit better lately, but I keep hearing about MTs who type 300+ lines per hour. It takes me a couple hours or more to do that. Depending on the dictator, of course. One woman said she used to type the news and that seemed to help her. I just need some encouragement that I will get better, or maybe some people don't.
speed typing
I also use IT, as it is through the company I work for. I am still getting to know the program. I tried Mavis. I found her to be cute, but annoying. I think am just being impatient. I really like the typer shark program. It's actually fun. I think I will take the time to work on understanding IT, so I can get it to work for me.
Thanks your input. It did make me feel hopeful!
speed typing
Will do! Thank you for the encouragement.
Speed was an issue for me....
Hi, Sandi - If you've been working with a dial-up at home and haven't had a problem, I'll bet you won't have one with the PC card. My problem is that I am spoiled - in my home office I have the fastest DSL we can get in our area - 7 mbps. So, when I use my laptop remotely, the Verizon service almost seems like dial-up to me. Just to give you an idea, the last time I used it remotely, I downloaded 20 discharge summary dictations, most of them around 5 minutes long, and it took about 45 minutes for all of the audio to download. Of course, I was camping in an area where the cell phone signal wasn't that great, so that might have been a factor.
If I were you, I'd try out your card for a few days before you dump your other service, just to compare.... It's all what you are used to, I guess....
playback speed
Thank you, I will check on this. You all have been so helpful. Thank you very much!
Can you get high speed?
That's VERY expensive for dial up. Most high speed services cost about that.
VR - speed and training
Honestly, how fast will VR type the dictation. I read somewhere about 160? Is that all? I don't understand how a Transcriptionist can train the program when it is the doctor that is dictating. Can someone explain. I am trying to figure out if this is something I want - whether it be to save my wrists for the future/ or if it will type the work faster than I do. I am generally about 200 now, depending on the work, sometimes better, sometimes worse. TIA.
My speed is really high but this job is not what
it was years ago. With being an engineer, it would seem that the money should really be good there. I have done this now for over 30 years and if I had to do now and raise a family, I would have to work more than 1 job, possibly 3-4. It is really not the money maker it was once, not at all. The work is not easy, not just a typist job, in fact after all these years I still am always trying to make sure my QA is not lacking, otherwise your job is lacking as in gone. My speed is around 140 wpm but the speed is not what is really important. I found it extremely difficult starting out and trained for over a year inhouse before I ever earned production. This would not be a job I would recommend now unless you just want to stay at home with a child, do part time, retired, in other words where you want to put in time and really don't need to make a living doing it.
Speed Type
Has a utility available that will convert your present files to ST for a $15 fee .. well worth it from my little chair!! Also, Betsy works with people to make sure they are on the right track with ST and has a toll free number and she is the help desk and not overseas, which should indicate that she does not have heavy volume of technical calls. It is a great program.
I did downgrade from 5.0 speed sm
to 1.5 speed and I notice no difference. I have done both VR and straight typing on Extext and notice really no difference. Saved me a bundle of money. Sprint DSL.
With your experience and speed.....
I don't know why others are telling you to try production-based before going home. With a typing speed of what you say you can do, you would well exceed 18.00 an hour. I don't think my typing speed is much over 100-110, but I average 25.00-28.00 an hour. Good luck in whatever you decide.
Exactly what I was talking about, if not for speed
and I mean my typing, nothing else, I would not be able to make what I want to make. I have to absolutely without any doubt keep all my attention on my work for the straight full 8 hours, no breaks, no lunch, dinner, hardly bathroom breaks until I finish. I could have break and/or food but then would just have to work later on in the evening. If not for the fast speed and having my dictation set as fast as it will go and my keeping up with most times, I could not stay in this business. Like I said, in 80s almost 60thous, in the 90s 40thous and now in the 20thous. Next 10 years I will be paying to work for them, I guess!!!
I speed them up every chance I get!
What is your typing speed? - sm
Though most of being a great MT involves excellent listening skills, to make the most of production, IMHO, you have type like the wind and use macros, including macro sentences rather than words only. Just a thought - when was the last time you took a typing test? I think there is a free Web based typing test...
Doubling Speed
I am pretty new at transcription and only typing approximately 100 lph. Any good tips on ways to help me double this? - I do use word Expanders (constantly making new and revamping as see fit).
I suppose practice, practice, practice is the main way; but I am guessing many of you who are experienced have discovered some helpful things along the way.
Really need to pay my bills, so I am willing to give any ideas a shot!
Thanks,
Kristy
doubling speed
One neat trick a fellow MT said was to push the dictator speed up just as fast as you can to still understand them. It really makes you perk up and pay attention, and keeps it going. Slowing down to understand them clearly seems to d-r-a-g you down. Hope it helps. :^)
I wish you could control the speed with
a keystroke. That would make it much more efficient IMO, instead of having to use the mouse.
Be sure you go into the spell-check settings and allow it to spell check capitals, especially if your account has you put allergies in caps (but even headings benefit from spell-checking).
Unfortunately it will then spell check patient names. Wish they could tell it not to spell-check the demographics.
Other than these quirks I think ExText works pretty well.
Maybe just me, but your speed is slow
at 70 wpm. I have been tested at 130-140 and getting the lines just not an effort- I think it has everything to do with the 70 wpm. You really need to build your Expanders and abbreviation list- that would help you tremendously.
|