How did you get Shorthand to work with Medrite?
Posted By: We've been told it can't. Thanks! nm on 2005-09-20
In Reply to: Expanders - MT on Meditech
nm
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Shorthand and Medrite-XL
Does anyone know if Shorthand will work with MedRite-XL?
Thanks
Shorthand and MedRite XL?
Hi!
Would anyone know if ShortHand can be used with MedRite XL? Thanks for any info!
I just work with ShortHand minimized. Smarttype doesn't work the same way? nm
s
I used Shorthand in CS.net - it should work
XX
Does PC Shorthand work in Radnet?../nm
xx
Shorthand will work with Cerner, but... SM
your hospital IT department will probably tell you it won't work and you will probably also be told you cannot load personal software on hospital-owned equipment. There is a way around this, however. If you have a jump/flash drive you can download the SH program for their website when asked where to save the download file, choose your jump drive (it is drive F: on my PC, maybe different on yours).
Once the file is downloaded, open up your jump drive and double click on the install icon. When you get to the step of the installation that asks where you want to install the program (usually defaults to C:programs) change that to your jump drive. Then install the program. Now, the program is installed on your jump drive. You can take your jump drive and plug it in to any PC, open up your drive, double click on the SH icon to run the program, and the SH program will run in the background on whatever PC you are using (you will see the SH icon in your right lower corner with your clock). It is not installed on the PC, so you are not breaking any "rules" that the hospital may have. Once you are done for the day, double click the SH icon and shut down the program and unplug your dive. No one will ever know. It'll be your little secret.
I did this for years. I worked on Cerner RadNet and got the same run around about Expander programs. I just did it myself and nobody ever knew.
Good Luck!
Does Shorthand work with Chartnet?
Does ShortHand for windows work with plantform Charnet? Thanks.
Shorthand does not work well with Emdat.
Need to find an Expander that will expand properly in any platform being that the right working situation for me is so hard to find.
Any suggestions?
TIA
I work for transcend and use shorthand. nm
x
Tryign to use ShortHand with Bayscribe and cannot get it to work - has anyone done this and how did
nm
Does Shorthand work with Medical Spellcheckers?
Just getting to know the Expander program "Shorthand", and saw that it says to shut off all spell-checkers. Does that mean that I cannot run Spellex or another Medical Spell Check program with it? Has anyone any suggestions as to what they use? Or any "work-arounds"
I am just getting started and trying to decide if I like "As-U-Type" or "Shorthand" better as my word expander. It seems that "Shorthand" does not act like a spell-checker like "As-u-Type" does, so need to add one.....preferrably a medical one.
PC Shorthand...Does it work in Emdat and Chartscript??
If so how do I go about setting up to work?
Yes, it is called ESP. Instant Text and Shorthand work
x
Shorthand 10 and Instant Text V both work on Vista sm
Don't know what you consider "not too much money," but this is a piece of your arsenal you don't want to skimp on. You should get the absolute best you can afford -- if you put the time and energy into making the software work for you, it will for itself in no time.
Does PC ShortHand work on Emdat or Word Client?
And if so how do I get it to work when using these platforms?
How do you get the shorthand word expander to work in 'word client'?
nt
I totally agree, the company I work for is switching from IT to Shorthand :( yuck!
xxx
Medrite
I LOVED Medrite-- easy to use, could check back on reports that you typed if you needed to make corrections, and made LOTS of line on it.
Medrite
I use Medrite and have for years. What do you need to know exactly? It takes a little getting used to but once you do, it's simple. It's a little archaic compared to EXText for example but I guess I'm just so used to it that I don't mind it.
Medrite
Are you using MedRite XL? When in TES you can view Masterview by clicking on the Transcribe tab on the tool bar near the top of the screen. Choose Masterview. Under "Search For" enter the patient's last name. Next is a drop down box for "Field"....chose to search by the patient's last name or by patient number. When you see the info you want, click on the DOS you want to view. And, yes, you can cut and paste....I do this quite often.
In the main screen the Masterview is at the bottom and you can do essentially the same things as above....check doctor's reports, patient's reports. You can also view all of the jobs you've done. Where I work we go by Transcription ID.
In the old Medrite...I believe you use F9 or F3 to view the repots. And, yes, I did cut and paste. I think I highlighted the area I wanted then right clicked on the top of the Medrite screen to bring up the cut and paste feature. It's been a long time since I used the old Medrite.
Sorry if this is confusing....trying to view eamils at lunch time.
Medrite
Anyone familiar with the Medrite platform? I am a fairly new MT and a prospective employer uses Medrite.
When I used to use Medrite I loved it.
I'm not sure what that person does not like about it. It was extremely easy to use.
Isn't that the pre-MedRite program
That Medquist tried to change people to and it was so awful?? There are much better programs than that one! I do see jobs now and then that use MedRite. Much less old-fashioned maintenance, and a decent spellchecker.
Medrite questions -sm
I used this program once before a long time ago. I will be starting soon using Medrite. Refresh my memory please. Is it MT friendly? How can I brush up on it while I am waiting to start with my new company? Or is that even possible? thank you.
MEDRITE question
Can someone explain the master view function to me. How can I bring up old dictations and can I cut and paste into shortcuts from there? TIA
MedRite-XL question
Hit a wrong button and now I have a split screen. I can get a full screen by hitting view, normal. Can anyone help me? TIA
My experience with Medrite
Medrite is real easy to learn and to use. Where I work we can look at all old reports, not just the ones we transcribed. Entering the demographics is real easy especially if you have a patient list you can copy and paste from. My company also supplies templates, which are easy to pull up and insert. The built-in Expander is easy to use, and you can also use Auto Correct. I believe you can use other expander software with Medrite, but that depends on whether your company lets you or not. I believe Medrite is a great platform to work on, especially for a newbie, because you will learn it real fast and can spend your time concentrating on transcribing rather than having to remember how to use Medrite. At any time you can check your production, too. There is nothing complicated about Medrite that I know of. I really like it.
Medrite XL question
For those who use Medrite XL ... I have noticed that the work/break hours are often not accurate on the counter, so I am wondering if the line count is likely off then as well.
Does anyone out there have any information on this? - Thank you. 
The Medrite system I used
had the best shortcut system built into it that I've ever used. Of course, it was also the first one I ever used, and you know how you tend to fall in love with one that you're used to.
Is that Medrite windows based or DOS? nm
nm
Transolutions has Medrite-they are hiring.
Lots of new openings.
CANCEL THAT-- It was MedRite that was not very good. SM
I worked on MedRite by Crescendo. Not Meditech. I don't have experience on Meditech. Sorry, I had the name wrong.
Medrite .... whats wrong with it?
A new account uses Medrite; was going to learn it possibly. Please tell me what's wrong with it. Thanks guys !
'Splain to me Lucy...what do you want to do to MedRite? sm
The other question well...too much information.
MedRite XL versus Bayscribe
Has anybody used both platforms? I have two job offers and I have the impression that I will make more lines using Bayscribe. Also do either of these support Shorthand? Any info would be much appreciated. Thanks!
MedRite XL versus Bayscribe
Has anybody used both platforms? I have two job offers and I have the impression that I will make more lines using Bayscribe. Also do either of these support Shorthand? Any info would be much appreciated. Thanks!
Don't care about Medrite, but loved your photo! LOL!!!!
z
SpeedType and Shorthand are the exact same program. Shorthand is lots cheaper and also has a trial.
.
{@KEY BkSp}-pack-per-year is for Shorthand. Using the semicolon works with both Shorthand and
;yo = -year-old
;py= -pack-year
etc...
Shorthand and SpeedType are exact same program. Shorthand will cost you lots less.
you can import your autocorrect into Shorthand.
I took shorthand too. But it sure comes in helpful for my expanders. I view words in shorthand for
i did use shorthand once in a job but i was so nervous the "boss" took pity and dictated the report on dictaphone.
If it is Shorthand, save the SPF file to a disk, then if you buy Shorthand yourself....
you can just drop the SPF file into it. That is not dishonest since you are the one who put the macros in. I am sure is it is another Expander there is a way to save the macro file and then drop it in the expander you buy on your own.
HELP with Shorthand. Suddenly today when I tried to start work today.sm
my ShortHand would type only the first letter of an expansion and then take all the letters away! I checked and the Type It button is grayed out! I have restarted the computer and looked on the Shorthand Help menu but can find nothing that applies. Can anyone please help me ASAP? I am lost without it! TIA
I have never found a program shorthand does not work with, it works outside the program (I think tha
nm
I get my work from an FTP site that they load the work to, however I don't have pool work so to
speak, but I tell them how many minutes a day I want. The work is generally put in my box by 5 pm every day, then I have until 10 am the following day for some priority work, or 3:30 pm for the rest, so TAT is not too bad. I would like to work less at night though, but I working on that. My downside is I do not get the same dictators day to day, there are a few I do on a semi-regular basis though, some generate great lines but take longer to do that other doc's and are not "money-makers", I also do not get paid for spaces so that hurts a bit too. This is WP5.1 too.....so very antiquated but that is what the hospital uses, so not much choice there. But I understand what you mean about the C-phone. I was just doing another job with C-phone recently...they incidentally did not tell me how to get off of the system, which was very simple. I'd finish a job, then hit stop and hangup if I wanted to get off or quit working. That is what you need to do if you want to sleep, eat, etc. Don't feel guilty, do what you signed up for, believe me they watch the pools and will get others to do the work you don't finish. If they get on your case remind them that you are only PT and only want 500 lines a day, etc. It's not worth killing yourself over. Good Luck. 
Shorthand ? sm
Is Shorthand compatible with and is it much different than the standard autocorrect in Word?
I use Shorthand with DQS
It is very compatible. You can set it up so that you can see a hint window while you type. I tried using the built in Expander in DQS, and you have to have a great memory, because there is no hint window or suggestion window, like Smartype. I also know that Instant Text is compatible with DQS, also; but I prefer Shorthand. I hear so many great things about Smartype and wish I could learn it, but it won't work with DQS; however, there is a way you can get around that. You can use Smartype and transcribe in Word, set your font size to 14 and save your file in Rich Text Format, then copy and paste into the DQS platform. Then select all and hit Ctrl 5 to get the spacing right. It sounds like a lot of steps and you will also lose your place as far as leaving any QA markers, so I personally don't care for the hassle, but I know of some MTs that do it that way, so you can try it.
Hope this helps.
shorthand
cool, i'll look into that thanks
Shorthand SM
Shorthand should work with ChartScript, since ChartScript uses Microsoft Word, but you would want to disable ChartScript's built in expander. If you are referring to ChartScript.net, Shorthand should work in that too.
shorthand
Wow! Thanks! I had asked that question a little while ago on the production board.
shorthand sm
Where did you find a free program? Did it load right into Word for Windows?
|
