HEADSET PROGRAMMING
Posted By: DEANNE on 2007-10-21
In Reply to: Is it *11# or the other way around?? Something like that. Been - awhile here. NM
Hit the program key at the top then keys, then pick the key you want then the code is #*11 then hit the select key and then stop key....good luck, I had this problem as well and do every now and then when I unplug my equipment.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
c-phone headset programming
I got this on 06/01/07 from MT Stars - here it is for you to program
Make sure the Dictaphone is plugged in and also into the wall phone jack.
Notice the display screen at the top of the Dictaphone, 3 gray buttons under the display.
Press the left gray button under the word PRGM.
The display will now read
PROGRAM
KEYS ID/TIME TEL
Press the gray button below the word KEYS.
The display will now read SELECT PROGRAM KEY. At this point push one of the 16 black keys below the display on the telephone keypad. If you are programming your headset for example, select any one of the 16 black keys that you want. Press that black key.
The display will now say ENTER NUMBER. For headsets programming #*11 (that is, the POUND key, the STAR key and then the number 11)
Now press the MULTIPLY KEY to the right of the telephone keypad. This key says SELECT on top of it and has an X multiply function on it.
Press the STOP key to exit programming function. The STOP key is located second from the right on the top row of the keys on the bottom of the C-phone.
Hope this helps. I printed this out and this has been so useful, especially when unplugging the C-phone during electrical storms for a period of time and you lose the programming.
HAPPY HOLIDAYS TO ALL 
t
Programming a dictaphone
I have a dictaphone, model 0421, which my company would like me to program to work with their Lanier system. I have no idea on how to do this. I tried e-mailing dictaphone and could not understand the instructions at all. I am able to dial into their system however, my foot pedal works backwards. This would not be a major problem, but my fastforward and rewind do not work at all which is a real problem. Any ideas?
Programming C-phone
Hi everyone,
I purchased a Dictaphone C-phone off of EBay; however, it did not come with a manual. I am totally lost. Are they all the same when it comes to signing a job off, leaving a job open, fasting forwarding a job, etc.? Is this something you have to program into the phone? If so, can someone tell me how to program my phone for these different requests? 
Programming C phone
The service you work for should be able to tell you the keys to push to sign off a job, etc. However, here is a link to the Dictaphone answer desk for more detailed instructions.
http://support.dictaphone.com/scripts/rightnow.cfg/doc/sales/opmanual/Connexions/0420qr.pdf
good HBO programming may not be...sm
to everybody's liking.......
dictaphone programming
 Does anyone know how to program headset into the dictaphone to work?
Thanks so much.
Lanier programming help sm
When I dial into the hospital on my Lanier LX-219, I get the doctor's dictating system, which has a 4 digit code, instead of transcription. The unit is set to slave mode. Is there anything else I can do to fix this? I haven't used it for awhile, but did use it before for transcription. Any help appreciated! Thanks!
Lanier has propietary programming...sm
and therefore their equipment can only be used with Lanier equipment.
HELP ASAP; C-phone programming
I am supposed to take a test using C-phone using following keys: play 4; pause 2; rewind 7 and fast-forward 4.
Anyone know how I can get the dictator to slow down? It would surely help me. TIA!!
Need Help!! programming DVI for Dictaphone System
Can anyone tell me how to program a DVI transcriber for Dictaphone System. The documentation I have for my DVI says it is compatible with Dictaphone but when I try signing onto a Dictaphone system, nothing works - keys or foot pedal. Any suggestions?
Lanier Voicewriter programming
I've searched through the archives and found some good programming info on the Lanier voicewriter. However, I couldn't find what I need. My loving 17 MO son hit some keys and now I can't see the lower screen. Anyone know how to fix this? Thanks
If you are talking about programming a c-phone
someone posted the directions a while back. I have the directions, I cannot find them at the momment but if you will look and the 3 gray buttons below the screen push the one that says progm. I believe from there it is self explanatory. HTH a little.
Instructions for programming Dictaphone
http://support.vianeta.com/Documentation/Implementation/DictaphoneProgrammingInstructions.doc
Hope this helps.
Ludi
Programming C phone in general
C-PHONE PROGRAMMING INSTRUCTIONS
Note: The C phone mapping system may be different for each facility. Ask the supervisor/owner for the programming keys needed for each function. Sometimes you may find them on the face of the phone, under the plastic cover. There are 16 buttons available to program (1-8 down the left side and 9-16 down the right side)
You will use the function keys under the display window and the Select button (X) next to the number key pad.
On the C phone screen, there are 3 buttons below the display window. The messages in the columns above the 3 buttons are:
Time Date
Progm Msg Directory
Select the Progm button and the follow screen appears:
Progrm
Keys ID/Time Tel
Note: Put some thought into the Keys that are convenient or work quickly. For example, button 9 (top right side) may be the button to dial into the system; button 10 may be the ID number you key in to access work, etc.
To program the keypad, press PROGM—KEYS
The screen asks you to select a program key. Chose one of the 16 buttons.
The screen will ask you if you want to Revise the information there, press one of the 3 buttons in the message screen. We will select YES. Then enter your ID number or dial-in number etc followed by the #.
We now need to SELECT this choice as the final step for programming this button. The SELECT is on the right side of the phone number pad, the “X” key. Each time you program a key, the last step will be to press the SELECT key to end that function.
If you make a mistake during the programming process, just press the STOP key on the C phone pad and start over.
For each subsequent function you want to program, follow the instructions again from
PROGM- KEYS
C phone programming instructions
C-PHONE PROGRAMMING INSTRUCTIONS
Note: The C phone mapping system may be different for each facility. Ask the supervisor/owner for the programming keys needed for each function. Sometimes you may find them on the face of the phone, under the plastic cover. There are 16 buttons available to program (1-8 down the left side and 9-16 down the right side)
You will use the function keys under the display window and the Select button (X) next to the number key pad.
On the C phone screen, there are 3 buttons below the display window. The messages in the columns above the 3 buttons are:
Time Date
Progm Msg Directory
Select the Progm button and the follow screen appears:
Progrm
Keys ID/Time Tel
Note: Put some thought into the Keys that are convenient or work quickly. For example, button 9 (top right side) may be the button to dial into the system; button 10 may be the ID number you key in to access work, etc.
To program the keypad, press PROGM—KEYS
The screen asks you to select a program key. Chose one of the 16 buttons.
The screen will ask you if you want to Revise the information there, press one of the 3 buttons in the message screen. We will select YES. Then enter your ID number or dial-in number etc followed by the #.
We now need to SELECT this choice as the final step for programming this button. The SELECT is on the right side of the phone number pad, the “X” key. Each time you program a key, the last step will be to press the SELECT key to end that function.
If you make a mistake during the programming process, just press the STOP key on the C phone pad and start over.
For each subsequent function you want to program, follow the instructions again from
PROGM- KEYS
Anybody working tonight who knows Lanier programming?
x
Need some help with Dictaphone C-phone programming the foot pedal..... sm
I have a coworker that needs to program her Dictaphone foot pedal. The foot pedal does not stop or start the dictation from what I understand. It is a used unit with no manual. I had a C-phone years ago but do not ever remember having to program my pedal. Thanks in advance!
Need help with headset
My headphones are louder on one side than the other. I have tried different headphones, so I know it has to be the computer. Any ideas on how to change that? TIA!
actually it could be the headset as I have had this
happen before. If the wiring in the headset gets messed up for some reason it can cause this. Have you tried more than 1 headset?
Headset
Hello, For excellent sound quality I would suggest the SPUSB headset which can be found on our website at www.tvps.com.
also....about the headset
I quit playing CDs on my computer because it was such a hassle to swap out the headset for the computer speakers. I had to pull the computer away from the wall and bend and stretch as far as I could and then use a flashlight to find the hole to change change them. Plus, I had very little slack in the headset because my hard drive sits on the floor. I solved 2 problems at once: I went to Radio Shack and bought an 6-foot extender for 7 bucks. One end fits into the back of the computer, and the headset attaches to the other end. Now I can even leave my headset on when I stand up at my desk to reach the very top shelf to reach some of my more obselete references. In addition, I just swap the headset cord for the speaker cord to play CDs. Makes me a happy camper for sure!
Headset
Please help... need to know where to buy a new headset as I lost the paperwork for this pair.. my ears are killing me!!!! Help!!!
Headset
I have tried so many, and I think the absolute best headset is made by Lanier Healthcare. They have been purchased by Medquist, and you can either go online or call 1-866-542-7253 to order one. The clarity is wonderful and they are very comfortable.
Headset for MT
I have tried a few different brands, but out of all of them my Koss DC/10 is the best. Good quality sound, light and easy on my ears for comfort.
OM headset
Thanks for the help. I had tried transcriptiongear.com but couldn't find exactly what I was looking for. If I can't get that particular one from OM I'll call customer support at transcriptiongear and talk to them. Thanks again!
headset....
Do you use an 'adapter' to connect your footpedal to the modem port? Sometimes this minimizes the volume.
You might try to install to install a soundblaster
headset
Did you try transcriptiongear.com
or Google lanier headsets
Headset adapter
I have a stethoscope style Dictaphone headset with a dual-prong plug in. I no longer need to use my C-phone, but love my headset, so I am looking for an adapter to make the dual-prong a standard single-prong plug in. Dictaphone of course does not sell such a thing. Does anyone have one and if so, where did you get it from? Thanks!! :)
Looking to replace my headset.
I'd like to hear what everyone prefers for these. I've tried all kinds but am not sure what I think are the "best." I want good sound quality whether it's from my computer or C-phone and will be using them for both (unless I should have 2 different kinds). At any rate, I'm curious what you all use or what you think are the absolute best. Thanks.
Lanier Headset
Does anyone know where I can get a good price on a Lanier Stethoscope style headset (metal) - LX-10-35??? I have found these for $70, but maybe you might know of a better deal. THANKS....
Usually when you plug in the headset
that automatically send the sound to the headphones instead of the speaker. This could be a DAC with a problem unless someone else knows a secret that I don't. Try a different headset and see if the results are the same.
Best place to buy headset
dictaphone headset
First hit top row keys, left(program), left again (keys), then select the key you wish to use from whatever is available.
Hit keys in this order: pound key (#); star key (*); 1; and 1.
Then hit the multiplication key (x) on the right, then the stop key at the bottom. I hope these instructions are clear enough.
I have never replaced my headset -
When I worked in someone else's office, rarely but occasionally a headset would/might break. However, since being at home doing same work 10 years, I have never had to replace my headset (the one that came with a transcriber years ago); however, I have had to replace several transcribers over the MANY, MANY years and think I'm on my 3rd one now......finally got a Lanier (they are the best in my opinion for transcriber machines).
You would use the code *11 for the headset
nm
Koss DC-10 Headset
 Do any of you use the Koss DC-10 headset? How is it? I need to replace my headset and I want to invest in a good new one. Can you tell me . . . are the ear inserts foam or a plastic-type material? It is difficult to tell by the picture on the web-site I have looked at. I perfer the plastic insert to foam. :-) I think they last much longer and seem to block out the outside noise. Your opinions please! Thanks!!!!!!!!!
New to WAV files. How do I use a headset..sm
and still be able to use my speakers? I can hook a headset up to the back of my computer but it means disconnecting the speaker wire that goes to my speakers. Is there some kind of splitter or connector or certain type headset or something I can use?
speakers/headset
I have an extension i bought at radio shack and plug/unplug speakers/headset - makes it easier than getting to the rear of the computer. I've never seen a splitter - it would make sense!
Headset - what do you wear?
I just can't seem to find anything that I really like. I want good sound quality (of course), not bulky, comfortable. What do you like?
headset question
I hope this does not sound dumb, but does anyone know if there are headsets now that block out the background noise coming from the recording of the dictator? I know there is BOS that takes care of surrounding noise of our environment but was wondering about the other. Thank you.
C-Phone Headset
Try re-programming it using one of the black buttons above the number pad. I do not use the speaker/mute button for my headset but programmed it using the first black button at the top of the row on the left-hand side. Try that and it should work without disconnecting you every time. Hope that makes sense
Tracy
stethoscope headset
I've purchased them on ebay from Universal Audio Visual, Inc., out of East Orleans, MA, and have been very happy with the price, quality and speedy service.
dictaphone headset help
i usually work online with everything. i'm filling in using a c-phone for a friend. i can't get the headset to work. it's just speaker phone and nothing else. seems like i remember having to program my old one. anyone know?
I need headset sound help....SM
The older I get the worse my hearing. I think it's all the years with headset jammed into my ears. I am working on an account with very low volume and techs cannot do anything about it.
Does anyone use headset with in-line volume control and does it work? I found a set on ebay - $30.00 plus shipping. But hate to order unless it works. Help!!
Spectra Headset
Anyone use the Spectra Headset with the USB connection. Ratings?
Good headset
Need to invest in a headset that blocks out noise in the room around me. Am using one of the "Lanier" type headsets, which has always served me well, but find that I can't seem to hear well enough on the the account I am on (particularly with some docs). There isn't that much noise around me, but I had seen some posts somewhere about a better quality, heavy-duty one. Can anybody point me in a direction?
Headset volume
I don't know what version you have, but with mine I do this with my "mumblers"...
In Express Scribe:
Go to File, then Special Audio Processes, and then Extra Volume Boost.
It will load and only takes a few seconds. I think you may have to do that for each file or you may have to do it again if you close out Express Scribe; haven't figured that out yet.
Hope this helps....
headset question
I guess we're all going through the same thing. I also asked the same question with a couple of responses. Is there really a good headset out there that will sound somewhat decent with my speakers ? This is just nuts, it sounds like my docs are dictating in the bottom of a tin can.
Thanx
Best headset is a USB. No noise but the
Bose Headset
I remember someone talking about getting these headsets. Did you get them? Did you like them for transcription? I'm hoping to get them for Christmas, but would like to know if they are worth it.
Lanier headset
I used to use a headset by Lanier that was white and had tiny white round things that fit very nicely in my ears. They recently broke and I cannot find them for sale anywhere. I have tried all the others available and they all hurt my ears. There are black ones out there that look just like these and they hurt because the black circular knobs that go in your ears are just a tad bit larger than these white Lanier. Any suggestions as to where I can find these, or are they no longer available. Strangely enough, I had the original box laying around for years until just prior to them breaking..... I threw it out. ROTFLMAO....... Go figure...
|
