Curious, do most IC's usually charge by the gross line or 65 character line?
Posted By: MT'ing on 2007-04-11
In Reply to:
Thank you~
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
$.06 gross line / .70 = approximately $.0857 cents per 65 character line.
A gross line is anything on a line versus 65 gross characters per net line the other way. You make more money working for the gross line than for the 65 gross character line, as long as the line rate's OK.
Yes if gross line or 65 character line with spaces....Good Deal!!! nm
x
Gross line versus character line....Sm please
I am thinking of taking a job that pays by the gross line and not a 65-character line. I have never worked this way. Does this literally mean if there is one little word on a line you get paid for it? I have not pinned her down on a line rate but I am just thinking I am going to be comparing apples to oranges and am wondering how to accomplish that.
Thanks for any help!
But that's a GROSS line, not a 65 character line.
So a newbie would have no problem at all hitting 150 lines per hour. A gross line is any line with a printed character on it.
Which is better? Gross line or 65 character line? It's
nm
gross line and character line
I am an IC currently doing one doctor who pays me by the hour but I will be starting another doctor soon and he will be dictating differently so I was going to charge him per line. What is the difference of charging gross lines or per 65 character line?
A gross line IS a gross line regardless if it's 90 characters long or 1 character long... SM
I'm very sorry that your lines are 90 characters line and you get paid by gross lines. You are cheating yourself - that's not my fault. You cannot change the definition of a gross line. So I gues I'm not understanding what you are trying to say. Now if you are trying to say that your line equals 90 characters and that's how you figure your lines, than you are not using gross lines. You have defined a line to be 90 characters, whereas most MTSOs define a line as 65 characters. If that is the case, then I must say again, you are cheating yourself.
So which is it, do you get paid by gross lines or by a 90 character line?
65-gross line vs.65-gross character line
Can someone explain the difference between these two? I am assuming that the gross line is better than the gross character line. How much better is being paid by the gross character line than just by the standard 65-character line? Does anyone know how much difference it would make in dollars and cents?
Thanks.
65 gross character line
Could someone please explain to me how this works. I have been an MT for 7 years with the same company and have been paid by # of total bytes divided by 72 x 11 cents per line. I am now moving on to a new job which pays by the 65 gross character line and I'm not sure how to figure this out. Would appreciate any help. Thanks so much.
I charge by 65-character line (sm)
My clinics have wanted 0.5-inch margins on the side. One of them wanted 10-point Times font. I think 65-character lines are fair for both parties.
I was referring to gross 65 character per line with spaces, sm
but again, it was very grueling, but possible. Granted, I had no life besides the keyboard.
Line rates gross versus 65-character
I recently had a call for family practice dictation and I offered 12 cents per line. Have always charged by the gross line and was charging 14 cents, which I thought was too high, so lowered it to 12 cents. However, the more I am reading I see that 65 character seems to be the way everything is getting billed. I also realize at 12 cents per line I lose a lot going to 65 character lines.
I also realize with family practice that they might have a lot of times where there is one or two words on a line and probably wouldn't be too happy about paying for gross lines.
I guess I'm looking for advice on charging. Is charging for gross lines unheard of anymore? I have already quoted the 12 cents, so that will have to be my charge. But as far as gross or 65 character, I haven't been asked that yet but would need to have that absolutely straight with them before starting. Any opinions would be greatly appreciated. I know I'm a little behind the times and am trying to catch up and stay competitive also.
Thanks!
what is the .065 cents per gross line equivalent to in 65 character lines?
Would it be about 8 cpl 65 characters or higher?
There is no such thing as a gross 65 character line! OMG! No wonder MTs are making peanuts SM
Some MTs can't even define a line.
A gross line is a any line with typewritten characters on it no matter how long or how short.
A 65 character line is just that - a line with 65 characters on it.
WOW!
I agree with Tinks....no such thing as a 65 character GROSS line....unless
you just so happen to type 65 characters during on that particular line. LOL
A gross line can be a full typed line or it can be one word on a line to complete a sentence that began on the prevous line. But it gets counted as an entire line.
Why don't we (MTs) charge by the gross line?
-
I, too, charge by the gross line (sm)
I used to charge 14 cents a gross line and delivered and picked up every day, printed reports, provided a list of each report transcribed, and reprinted lost reports, all at no extra charge. Only one of my clients has ever been a real stickler for 24-hour TAT, so I'm lucky in that regard. When things get too busy, I do the best I can. Then I went to 12 cents a gross line as I could no longer pick up and deliver every day. This was 10 years ago that I switched from 14 to 12 cents. I haven't raised my rates in a long time but am pretty comfortable where I'm at now with my rates as I no longer print, have gone digital, have good dictators and report types, and also there's India to consider. I'm in central California which is not nearly as expensive a place to live as southern California. I would *think* your area could support 16 cents a line but I really don't know if India would be a concern for you? We have quite a few docs around here using India but a lot wouldn't consider it an option. You can always ask for more and see what they say, but you also want to be given the chance to dazzle them with your skills so they think they can't do without you. With the cost of living increasing, if you aren't making enough due to the type of reports/dictators you already have, I would definitely approach them with the idea of an increase.
I charge .10 a gross line.
.
65-char line to client and charge for gross? sm
That's a bit underhanded. If they ever get suspicious, your line counts are going to exceed what they count at 65 char. a line. You said yourself that 65-char/line and gross line are two different things, so why do you contract with the client saying you bill for one and actually bill for another ?? That's shady, IMO, and I would never quote my client a 65-char line and then charge them for gross line.
Quick question! Is 10 cpl with benefits at 74 character line better than 9 cpl at 65 character line?
Thanks
A gross line is anything on a line is a line. A line set at 65 characters means it sm
has 1-inch margins on each side. The maximum number of characters on that line would be 65 and that includes spaces. If there is 1 character on that line it is a line.
A standard 65-character line usually consists of 65 characters with spaces unless, of course, the employer does not pay for spaces and then it would be 65-characters without spaces.
Gross line = each line on page counts as a line, even if it's only 1 word. nm
x
Gross line means anything on a line is counted as a line.
You can get an idea in the difference using documents you have already created, assuming you're working in Word. Simply open a document and check the properties. Click on the statistics tab and you will see the number of lines as well as characters with and without spaces. If you're currently getting paid by the line and a line is 65-characters with spaces, do the math and see how that number of lines compares with the number of lines in your stats.
One thing to keep in mind: if you have a blank line between paragraphs, instead of hitting the enter key twice, format your document to give the appearance of blank lines between paragraphs.
65 character line versus gross lines versus pay by word
I am checking into other options for transcription. Can anyone tell me how to compare all of these types of lines & also payment per word? I know companies use different scales, so I wondered how they compare. I have been paid on a 65 character line with spaces, but I may be making a change in the future - don't want to get burned.
Thank you in advance!
What is the average line/hour for a 65 character line with spaces? NM
.
Gross line, also including blank lines because my line rate is so low. It all works out in the wash.
x
A gross line is any line with typewritten characters on it - no matter how long or SM
how short. So your gross lines may be longer than 65 characters, but you get credit even for a line as short as "Sincerely,". If your gross lines are not being counted that way, then you are not being counted on gross lines and are probably getting screwed. I'd look into that if I were you.
What's the diff between a gross line and a 65-char line?
Mebbe just got my first OWN ACCOUNT YAY! He said to charge him the "going rate" since I pay him that. This could be the start, baby! (I hope)
A gross line is any amount of characters on a line
for instance...
MEDICATIONS:
Effexor
Prevasid
A 65 character line without spaces is black marks on the page only and 65 w/spaces is everything... tabs, spaces, numbers, letters, bold, etc.
gross-anything on line counts as line,even one word
xx
IC, by line, 68-72 character spaces/line
@
gross line is anything on a line, even just your initials. sm
spaces really don't matter in a gross line count.
7.5/gross line or 10/65 char line?
Anyone have any idea which would come out to more? TIA
A gross line may be close to 65 ch.pl but she said line
z
What is a 55 char gross line compared to a 65-char line including spaces?
t
Gross line is anything on a line is a line
so if there is just one character, it is a line. Font definitely makes a difference though particularly if there are true type fonts involved. That's one you have to be careful on and insist on fixed fonts.
Just do a gross line - anything on a line is a line. sm
I use Abacus - free line counting software.
65-character line
Some of you have asked about what her lines consist of. Her lines are the same as mine--65-character line including spaces. I know she has some templates, but I just really think that she's exaggerating somewhat. Maybe she can hit 500-600, but I just don't see how anything higher than that is possible.
I do like a good challenge, though, so I'm going to get started with my Instant Text and see where my counts are a month or so from now.
Thanks for all of your replies!!
Is this a 65-character line?
Are you getting paid extra for bold, underlying, etc? Don't see how they figure 6 cpl with spaces equals 9 cpl unless they use a different character count for their lines.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
I don't think so. If it's a 65 character line, they probably
But regardless of how they do it, 9 cpl to the client has just GOT to equal poorly-transcribed, offshored medical records. I sure hope my record isn't one of them.
70 character line
Is there anybody out there in the entire universe who uses a 70-character line? I work at a hospital and we have to type 1100 lines a day on a 70-character line. Just curious.
I think it was based on 65-character line
All these formulas are confusing to me. I guess I need to ask some more questions. But, it's also an IC position, so that makes a difference doesn't it? Low pay for that? But, you are right, might be good experience.
What is "compensation 65-character line B/W"? nm
xx
Has anyone ever heard of B & W 65 character line?
What exactly is it? I know 65 characters, but is that without spaces or what??
.08 cpl/65 character line for me right out of school.
/
___cents/65 character line
many transcriptionists get paid by the 65-character line
It is based on a 65-character line. sm
Headers/footers not included, spaces are.
My ES accounts always match that of Word when you take total characters including spaces and divide by 65.
EditScript software does not "control" spaces after a sentence. If you put 2, it will count 2, and if you put 1 it will count 1.
If a comes up ready for editing and you have to transcribe part of the report, you are paid at the editing line rate....unless you contact your account/supervisor and tell them you had to transcribe it. Depending on the company or hospital, they may or may not give you the transcription rate. That is probably a case-by-case basis or account-by-account basis.
The software can not determine you transcribe part of a report that was initially q'd for editing. If that dictator is voice recognized and he dictates one sentence, it becomes a document "Ready for Editing."
I hope this answers your questions.
I have been working with ES for about 7 years now. Absolutely enjoy working with this software program.
65 character line with spaces
TIA
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines, then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50. This is if it is a 65 character line including spaces.
A 65 character line is 65 characters
on a line. If have 650 characters in a document, that is equal to 10 lines (650 divided by 65), then multiply that by whatever your cpl rate ie. If 0.10 cpl then that would be 650 x 0.10 which would equal $0.65, if 6500 characters, then that would be 650 lines x 0.10 which would equal $6.50.
|
