Control-settings....
Posted By: dd on 2008-01-23
In Reply to: Have You Tried the Settings? - Amanda
Thanks so much - still having problems. Got the wizard to work on a couple of ports, but only to the push rewind pedal - then will do nothing - locks up and goes crazy with buttons on Express Scribe flashing continuously...any ideas?
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Settings, control and then where?
Settings, control and then where - can you help me?
Thanks so much!
Did you go to your settings and do the control set up wizard? nm
@
go to settings...control tab...follow instructions there....
nm
Play with the settings under Playback & Control and
s
Uncheck the box for Quick tap under Settings, Control.
I had the same problem and had to uncheck the box "Quick tap on play pedal locks play on" and the problem was solved.
settings, control panel, keyboard sm
hardware. make sure your keyboard is plugged in and you should be able to select it.
Same thing happened to me.....go to settings, control panel, (SM)
then go into something called Intel Extreme Graphics, and then rotation. Set it back to normal. This should work.
Foot pedal control/knee control? (sm)
My sewing machine has a knee control built into the side of the cabinet and I find this very comfortable. I would like to somehow do the same with foot pedal I use for transcription. Can figure out how to mount it, but having trouble adjusting it so the 3 pedals are not an issue. ANyone done this or have any input?
Foot pedal control/knee control
Though I have not had experience with this type of modification, I have repaired numerous footpedals and have some information that may be helpful. Generally, the footpedal is comprised of the primary circuit board, the wiring to the computer, and the three switches for play, rewind, and fast forward. These switches are easily removed from the pedal with a screwdriver. With basic soldering, you can lengthen the wiring to each switch, or even replace them with different switches you can get at a local electronics store. With a little bit of creative engineering, you could mount some knee -controllable switches that could control the footpedal.
Settings, Playback settings.
Increase or decrease the steps in Rewind.
I use Control N to end a job - Control T is for when viewing an old report
Don't know what you are talking about
yep, control, control, control... that's the main
nm
Start>Control Panel>User Accounts>Turn User Account Control OFF
x
Yes . . . it is under settings
Playback tab, then Auto-backstep on stop
settings
I am using Express Scribe, and I tried the settings and that didn't help. Thank you!
settings
Yes, I am afraid I did all of that. It keeps coming back and saying that it is not a supported file. Thank you very much for helping!
Under settings. sm
Click Playback tab. For Rewind, I have set mine to 500 and Speed at 150.
Try the Settings.
Under playback tab you can change the rewind. Mine is set at Step (ms) 500 and Speed (%) 150.
Go into Settings.
On the Control tab use the footpedal setup wizard to set what part of the pedal does what. On the Playback tab, you can change the backspace. On the
Have You Tried the Settings?
I haven't used Express Scribe since school, but have you changed the settings? I had to change it to change the settings for what food petal I was using. The one I chose was V-something (VEC? VRC?) 3-pedal, I can't remember.
It may have to do with your settings sm
under File, preferences. Make sure you don't have verify target window checked. Also, may be the pause....after so many keytstrokes. Play around with that one. Every body is different but what works for me is pause 5 msec after 1000 keystrokes.
Also, try waiting for the expansion to appear before you type the word after it.
And below, make sure you have simulate Keystrokes checked.
Settings....
On Exp Scribe, click on settings,file type, and if you don't what type of file, just check them all. Then give it a try and see what happens.
Did you try the settings on the
monitor itself. Mine has buttons to push to change the screen size and my old one had a dial. That's about as much as help as I can give.
Did you check all your settings and especially....
your password in OE? If so, is the Spamgard on in Yahoo so that it is keeping from going to your OE?
Settings on my computer??? sm
Do you know how to check those? Thanks for your help!
see message for my settings. sm
variable speed 50 to 150
tone low frequency 1500
back step 1500
mode: constant
rewind: 500 and 150
forward: 500 and 150
I DID go into the settings and *told* it what to --sm
count. It was still very inconsistent and would not count headers, even though I *told* it to. I would count lines with it and then recount with Sylcount and Abacus was always fewer lines. This was just MY experience with it and I don't need to be made to sound like I am not familiar enough with these programs to not do the *settings* correctly. thank you.
it depends on the settings
I worked before for gross lines, but it depends on the margins and the font setup. I had one account that was Ariel 12 and the other was only a font of 10. With the 12 font I got more lines credited as opposed to the 10 font. Working at 9 cpl without spaces actually evens out to about the same as the lesser amount with spaces. You can download Abacus and then take a document you have typed and have it count it without spaces and with gross lines and then see the difference, it's really not that much.
click settings then...sm
under Playback tab, adjust the Auto Backstep on Stop (0-5000ms). 1000ms = 1 second.
Go to settings, then file and
it gives you a spot to put the number of days to delete files.
Will do both, but how do I get those settings back?
TIA
Mine won't let me do that. Wonder if it could have to do with the settings? nm
x
Changing settings
You can change the settings. With your mouse on the main desk top screen, right click and go downto properties. Go over to the settings tab and this will give you options for changing the font size. You can change it in that setting by changing the pixel settings, or you can click on the Advanced button and change your DPI setting (or both).
Hope that helps.
I believe if you go into your settings while booting up. SM
On my PC if you push F2 or F8 during the boot up process it will take to your configuration settings. There will be an option that will be able to clear the password so that you will not be asked for a password anymore.
Yes, I had looked at settings, but I don't see how
to do that. My screen is stretched now, and maybe I'm looking at the wrong place. I dunno....I'm seriously challenged when it comes to this stuff....thanks for replying
Playback Settings for ES
Hello. You can go to the Playback Settings in ES and find the Auto Backstep on Stop heading. Mine is set to 1780 that allows for a reasonable auto backstep. You can adjust to your liking. Once you do that, go to "Control" and run the Footpedal Setup Wizard. That should do it! Best of luck.
Daytime 70, nighttime 65 for my AC settings. nm
..
In the settings, click the Incoming tab...
and then you can select file(s) for Express Scribe to scan. Then it will scan those and will load files automatically.
Did you try the Settings in Express Scribe?
The pedal controls won't work until you open Express Scribe, go to Settings/Settings.../Control, and select VEC Pedals USB or something like that; 3-pedals. Then, you click on "Foot Pedal Control Setup Wizard" and it will have you to press rewind, fast forward, and play. After that, the pedal *should* work.
I received ByteScribe with my USB foot pedal but I didn't like it so I uninstalled it and downloaded Express Scribe with no additional software.
If that doesn't work, I really don't know what to tell you. Sorry  .
Amanda
I could see much better but the settings slowed down my computer..sm..
I didn't have any trouble getting it back though. Hope you find something that works.
I didn't like what settings I chose (sm)
using Tonks directions so I tried changing back to the original settings and had a bit of trouble regaining them. Just a heads up for anyone wanting to try changing your settings using the wizard. You might create a system restore point before you make any changes so you can easily restore your old settings if need be.
Click on Settings and it is under the Playback tab.
x
You would have to change the margin settings.
Under Styles, find the List Number and change the hanging indent setting. This will then apply to all documents based on that template.
click settings then files nm
nm
EMDAT pedal settings
*silent screaming* Is there any way to change how far back the voice file goes back when you take your foot off the pedal? I disabled the pause/play option because I went it to rewide a second or two but not the 10 it is currently doing. This system is a pain. I'm hoping it grows on me! 
emdat pedal settings
Go to options - date/time and is there. 
Express Scribe settings
Try going under settings, files, and select .dss I have been using ES for 4 years and there are always quirks... not sure how I get the solution each time. Hope this works.
Yes - DSS files are checked in settings
Thanks
Sort of. The software usually has a settings
where you just click on it and press the pedals as it requests. You can also change the function of the pedals - for example make the left one rewind and the right one FF, etc.
Some software will only work with certain pedals. Generally a USB-1 pedal will work with the majority of the software, but not always. Some software requires a special foot pedal.
Anyway the programming is very easy, takes 2 minutes tops.
If you change MS Word settings to
... do you have to switch it back to white background/black type when you send in your work?
I send my work FTP and wondering if I send it blue background/white type, will the MTSO get it that way or will it appear normally with the white bkg/black type?
I hear that using the blue bkg/white type eases eye strain, which will help me, and wondering if I need to change it back before sending it via FTP.
MS Word grammar settings?
I would like to set up my MS Word to catch as many grammar errors as possible. Should I just check every box?
Thanks
|
