1385 by 65 char line.
Posted By: nm on 2005-12-09
In Reply to: how many lines does 90K characters equal out to roughly? - it's Friday, ok
nm
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
What is a 55 char gross line compared to a 65-char line including spaces?
t
What's the diff between a gross line and a 65-char line?
Mebbe just got my first OWN ACCOUNT YAY! He said to charge him the "going rate" since I pay him that. This could be the start, baby! (I hope)
10 cpl per 65 char line
I include all spaces, headers, footers, etc with a 24 hour TAT.
65 char line
while you are in a Word document, click on Tools from the bar at the top. Then click on word count. You will see characters (no spaces) and characters (with spaces). If you are paid by 65 characters with spaces, take that number and divide it by 65. Then take the result and multiply the result by .08 or .09 if you are paid 8 or 9 cents per line. That is the amount of money you made for that one letter.
7.5/gross line or 10/65 char line?
Anyone have any idea which would come out to more? TIA
65 char per line is not the same as gross?? sm
You said "Anyway go with gross line, I still quote it as 65 characters per line which it is but I count by gross and 12 font."
65 char per line is NOT the same as gross. How in the world do you come to the conclusion that it is? If it was the same, then the 65-char line would not even exist. Gross line count means that even a line containing only one word is counted as a whole line. 65-char. line means that a line must contain at least 65 characters (i.e., letters, numbers, or symbols) to be counted as a whole line.
Gross line does not equal 65-char. line and you are doing a huge disservice to your clients and to the other MTs asking for advice here by saying it is. Clients do sometimes check the line counts to see if they match (obviously yours don't so you have been lucky so far) and if you bill them at gross lines and they are counting at 65 chars per line, your line count will be quite a bit higher and it will look like you have been padding your line counts.
Please, do clarify how it is you feel a gorss line is the same as 65 char. per line. Also, font does make a difference when using gross lines but does not make a difference when using 65-char lines so again, your theory that you are switching fonts tells me you are, indeed, charging gross lines and yet are quoting clients at 65 chars a line.
Does anyone else think this is just a tad on the shady side ???
.11 cpl/60 char. line for hospital
account that I do from home and am also considered an employee. They pay my insurance and also offer family insurance for 110.00 a month. I also have another account for a brain and spine trauma center that pay me .13 cpl/65 char. line.
Here's the thing. We were paid on a 50-char line SM
because we were on new software and it was hard (before EDiX). Then we went to 60 char and you have never heard the screeching and griping (LOL. We just didn't know).
I have told this story before, but for five years I was the supervisor in the MT dept. All I did was evaluate MTs, line counts, average lines per hour, just endless figuring. I could tell you off the top of my head what any particular dictation should count out to.
In fact, after I decided to go back to transcribing, I knew the very day that my former employees started cheating - our line counts were posted by ssn on a computer-generated list. I knew that work like the back of my hand.
When EDiX did their spiel, I was eager to start with them because I knew how they supposedly counted their lines and I knew how many lines a day I could type. Man, I was gonna be RICH.
Not one line count EVER matched what it used to. Bad thing about that is, I just got blank silence on the telephone when I asked what was the deal. When I asked my immediate supervisors how they were counting these lines, I got "I don't know. I'll get back to you." Nobody ever answered my question. I gave them a year full time, and then I had to start working other jobs to make ends meet so I quit.
They asked me to come back, and I said I would, part time. They said they really needed me on that account. All told, I was employed there three times in three years. I never made enough money to even cover my basic expenses. I cannot live like that.
My biggest problem with nationals, and the reason I refuse to work for them, is that the money goes to the suits first, the MTs next. People who do what we do simply do not need that much supervision. If they hire newbies who do need extensive supervision (and they do, we all did), we all pay for it in that situation -- I'm not against hiring newbies, by the way, but the $ it takes to hold their hands the way the need their hands held should not come out of the pocket of the veteran MT who sits down and chugs out her work day in, day out.
So no more nationals for me. I make three times what I made at EDiX now, working for a company that could be considered a national because we're scattered out, but it's still run by the owner, and her aim in life is for us to make as much $$$ as possible because then SHE does. That's the way it should be.
National companies treat MT as a cost center and that is not right. That's for the facilities to do. The MTSO should treat us as an income-generating entity instead of a hole to divert money away from their executives. They've got it all wrong!
Gross versus 65 char line
Can someone tell me how a gross line is calculated. Thanks.
I charge by 65-char line with spaces...sm
The two accounts I've worked on wanted 0.5 inch margins on both sides. One of the accounts wants 10-point Times. The other wants 12-point Times. They want the margins so big because they are trying to save on their paper costs, because the sticky back paper (I think that's what they use) is apparently quite expensive. I send the documents via e-mail for them to print on their own. Anyway, charging for a 65-character line with spaces nets me more than a gross line because of the margins, font, and typeface. Try it with your line counter. I have one built into my Instant Text (which I don't use for invoices) and SylCount. Both of them show that the gross line is quite a bit less when the margins are this big.
Why not charge for spaces? You type 'em like you type a letter or number! 
10 cents/line 65 char. w/spaces,
Small company (about 7 of us, I'm the only part-timer) Acute care, mix of dictators, 1 year part-time experience.
Only if that is coupled with a line definition of greater than 55 char.
.
65-char line to client and charge for gross? sm
That's a bit underhanded. If they ever get suspicious, your line counts are going to exceed what they count at 65 char. a line. You said yourself that 65-char/line and gross line are two different things, so why do you contract with the client saying you bill for one and actually bill for another ?? That's shady, IMO, and I would never quote my client a 65-char line and then charge them for gross line.
At 40 hours a week? Is that gross line or 65 char?
You'll never get an accurate comparison unless you have every single detail lining up, i.e., same rate per line, same amount of hours, same type of work, same doctors dictating, same amount of Expander entries, same typing speed, same method of payment, etc., etc.
It just doesn't matter what anyone here posts -- it's going to be different for each individual. There is no real true way to predict what you will make at this profession!
then they'll offer you 8 cents/ 65 char line. very sad nm
dfd
127 if based on 65-char line (8243 divided by 65 is the formula) nm
c
I quote a price per gross 65 char line, say 12 cpl, but then convert
I have one client who doesn't want bulk and is Franklin condensed 10; another is on Garamond 12 with a 1 inch margin R and L. I take a large block of type, put in a format that gives me 65 char per line and do a line count that way and get a price for the whole block, for example, 58 gross lines at 12 cpl = $6.96. Then I take the same type and format it as the client wishes, get a line count and divide the dollar amount by the lines. If their formatted version came to 28 lines, then 6.96 divided by 28, would come to 24 cpl for their format. I always include a line on the invoice to indicate their 65 char line rate. Something like
2586 extended lines at 0.24 cpl = $620.64
(your line rate converts to 0.12 cpl for standard 65 char line)
I always educate the client as to the industry standard of the 65 char line which allows clients to compare apples to apples...
I just re-read his email and he said he paid 9 cpl per 55-char line! Must be offshore. sm
I'm going to bring up the offshore issue with him and HIPPA issue as well. My OB/GYN just switched over to that practice to do just GYN and specialize in urological gyn, so they have my records too and I sure don't want them overseas. Even if they don't want to hire me, that's fine and I'm not going to sales pitch him at all, but I don't want my records outsourced.
Two companies, both 65 char lines including spaces, one pays 0.10/l and the other 8.5/gross line. n
x
It's 1385 lines per day
It's a little higher than most companies usually ask for full time, but not by a whole lot. It averages out to 173 lph. That's doable.
Here's how I got there: 15k lines per semi monthly pay period = 30k lines per month. Divide that by 4.33. NOT 4. There are not exactly 4 weeks in a month - the only month that has that is February. That gives you your weekly commitment and then from there you go down to your daily or hourly commitment.
Like I said, though, it's doable.
Own accounts; 12 cpl 65 char and 17 cpl 65 char.
Accounts are on the West Coast.
8 CPL, 65-char w/ sp.
RTI, Inc./California (but I am in AZ as IC. Think I could do better.
0.775 (?? how they figure it) and 0.8 (65-char w/ sp)
/
A 5-char word would be better....
I just counted an entire report that I had done earlier. It's typical of clinic reports that I type every day. No long medical terms, just the basics.
It probably isn't the most reliable way, but using MS Word Count, the report has 394 actual words, 2387 chars with spaces.
So, if you want to say a word is 5 chars:
Divide all the characters in the report (2387) by 5 (the number of chars per word).
Then divide by 8 (for the number of words per line).
This comes out to 59.67 5-char, 8-word lines.
Again, using MS Word Count:
To calculate a 65-char line:
There are 2387 actual chars in the report. Divide 65 into 2387.
*There are 36.72 65-char lines.
To calculate an 8-word line:
There are 394 actual words. Divide 394 by 8 (words per line).
*There are 49.25 8-word lines.
That's an easy way for her to do her line count for this company, as all she has to do is let MS count the actual words in her report, then divide by 8 to get her line count.
Pay for this report:
36.72 (65-char lines) at 0.08/line -- $2.88.
49.25 (8-word lines) at 0.08/line -- $3.94.
With the pay being 0.08/line, comparatively speaking, that still comes out to about one extra 8-word line (for every three 8-word lines she types) when comparing it line for line to the standard 65-char line.
At 0.08/line, a 5-char, 8-word line would be $4.77 for the same report. If the OP wants to go to the trouble of counting this way, she would do well.
She could probably also find a line counting program she could program to generate her bill and simplify everything.
To SandyGirl: MDI pays 10-11 cpl 65 char., sm
Spheris pays 10 cpl + incentive.
FC pays 10 cpl and 11 cpl on weekends - IC status.
QT pays 9 cpl - gross line, IC status.
JLG pays 10 to 12 cpl 65 char.
As you can see, there are companies out there who will pay 10 to 12 cpl, albeit IC status mostly, but they are out there.
I hope this helps you find the right company that pays the "big bucks"!
Merry Christmas!
I'd count it too via 65-char just as you are doing the rest - sm
especially since you print it out, ink costs money, as does paper.
Gross lines vs. 65-char
A gross line is anything on a line IS a line - usually the standard is Courier 12, 1 inch margins - that way, if a doc wants Arial or Times New Roman or any other font, he will know that it will always be counted in Courier 12 regardless of the font he uses.
65-char means based on a 65-char per line basis, lines are counted, so it is not a "line" unless there are 65 characters on it - the counting programs that count this convert the document to one big long document without returns, etc., linking all the characters in one long line and counting them that way. Clearly you can see how many fewer lines you would get by this method. When this was brought into the business it was touted as a "fairer" way of counting - but the only one it is "fairer" to is the doctor - it cuts the lines vs gross lines an average of over 30% - for example, if you are making 7 cpl for a 65-char line, you are in reality making 4.8 cpl gross lines - quite a difference.
Gross lines versus 65-char, etc.
I think the above poster misunderstood me. I was trying to simplify the difference between counting a gross line and counting a line via character - which IS basically blowing out the document to full 65 character lines (with or without spaces)and counting them, versus counting anything on the line as a line.
That is true, though - the best way to compare documents is to look at the gross line count (after changing margins and font to 1" and Courier 12 respectively), then taking the character count and dividing by 65. Many who have never been paid by gross lines or have not really compared the difference would be amazed to see how many less lines you get on a 65-char count.
Can someone please tell me what $5.00/1000 words converts to in cpl when 5.5 char=1 word? nm Thanks!
Industry standard used to be 65 char and font didn't matter...
but that's all up in the air now - sometimes lines are gross lines, sometimes it's character count divided by 65. If you are on a line count that just takes characters and divided by 65, then font doesn't matter. It might SEEM it takes you longer to make your line count but not really relevant.
A gross line is anything on a line is a line. A line set at 65 characters means it sm
has 1-inch margins on each side. The maximum number of characters on that line would be 65 and that includes spaces. If there is 1 character on that line it is a line.
A standard 65-character line usually consists of 65 characters with spaces unless, of course, the employer does not pay for spaces and then it would be 65-characters without spaces.
Anything on the line makes up a line even if just one letter or number. Every line of print is a
s
Gross line = each line on page counts as a line, even if it's only 1 word. nm
x
Gross line means anything on a line is counted as a line.
You can get an idea in the difference using documents you have already created, assuming you're working in Word. Simply open a document and check the properties. Click on the statistics tab and you will see the number of lines as well as characters with and without spaces. If you're currently getting paid by the line and a line is 65-characters with spaces, do the math and see how that number of lines compares with the number of lines in your stats.
One thing to keep in mind: if you have a blank line between paragraphs, instead of hitting the enter key twice, format your document to give the appearance of blank lines between paragraphs.
Gross line, also including blank lines because my line rate is so low. It all works out in the wash.
x
$.06 gross line / .70 = approximately $.0857 cents per 65 character line.
A gross line is anything on a line versus 65 gross characters per net line the other way. You make more money working for the gross line than for the 65 gross character line, as long as the line rate's OK.
A gross line is any line with typewritten characters on it - no matter how long or SM
how short. So your gross lines may be longer than 65 characters, but you get credit even for a line as short as "Sincerely,". If your gross lines are not being counted that way, then you are not being counted on gross lines and are probably getting screwed. I'd look into that if I were you.
Yes if gross line or 65 character line with spaces....Good Deal!!! nm
x
1) do you have a contract stating line counting and line rate,sm
if you look at the IRS website it's pretty clear what constitutes IC versus SE versus employee. You might want to photocopy that along with a copy of your contract with your next invoice and also put on the invoice any monies due from past invoices they "changed"...maybe catch more flies with honey than vinegar. Good luck!
New England, 16.50/hr, 8 cents a line after minimum line count..
full benefits available with general contribution by the hospital before you start paying for them, retirement, 403b, all benefits, and working at home as an employee, BUT, you have to live local to the hospital.
I changed my line to a business line, talked to a supervisor sm
at SBC, told him what I was using the service for, and got the okay to use it -- $49/month unlimited.
I have also used The Neighborhood, and their unlimited is truly unlimited. I also explained to them when I signed up what I was using it for and their comment was "unlimited means just that -- unlimited, no matter what." I cannot remember how much they were, but it might be worth checking into for you. (www.theneighborhood.com)
Good luck!
What is the average line/hour for a 65 character line with spaces? NM
.
Curious, do most IC's usually charge by the gross line or 65 character line?
Thank you~
it certainly is not pay worthy at 4.5 line or 3 line. I know the companies cram it down our throats
nm
That still is not a paid line rate. If your base is $0.10 per line, it will be $0.08 cpl.
Considering other companies pay 4 or 5 cents per line for VR - you are still making out.
Question about what is PAID for a line and what is BILLED for a line
Does the MTSO actually bill for headers, footers, and other things the transcriptionists are not paid for? I worked for a company a while back and their copy of what each Transcriptionist typed the day before and our copy was a lot different, about 30% different. Their copy was the billing copy. So, double their enhanced amount and subtract our 9 cents a line, it comes to a bigger profit than what I thought.
A gross line is any amount of characters on a line
for instance...
MEDICATIONS:
Effexor
Prevasid
A 65 character line without spaces is black marks on the page only and 65 w/spaces is everything... tabs, spaces, numbers, letters, bold, etc.
that should be "up .02/line" NOT up "to" .02/line. geez. nm
x
Gross line versus character line....Sm please
I am thinking of taking a job that pays by the gross line and not a 65-character line. I have never worked this way. Does this literally mean if there is one little word on a line you get paid for it? I have not pinned her down on a line rate but I am just thinking I am going to be comparing apples to oranges and am wondering how to accomplish that.
Thanks for any help!
gross-anything on line counts as line,even one word
xx
gross line is anything on a line, even just your initials. sm
spaces really don't matter in a gross line count.
|
