I work on Docuscribe (not MQ) and have also worked on Chartscript in the past. My line counts went
Posted By: houndlady on 2009-07-28
In Reply to: DocQScribe questions - mto
down significantly when I went to the DQS platform. Don't know if it is being manipulated or not, just simply stating the facts as I have seen them.
Complete Discussion Below:  marks the location of current message within thread
- DocQScribe questions - mto
- I work on Docuscribe (not MQ) and have also worked on Chartscript in the past. My line counts went - houndlady
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
it's been posted in the past that line counts are
pretty much set differently from one MTSO to another.
Problem is, clients cannot prove their counting systems no more than we can.
Regulation is in the future, unfortunately, that might hurt us.
I worked for a different company using Vianeta and could never access line counts. Was also told it
:+
When I worked inhouse, we used Chartscript, now that I work from home for a different company, we
use Docuscribe. In my experience, my line counts were much higher with Chartscript, but I think any program can be told to count lines a certain way, such as weighted lines with Chartscript for difficult dictators, which made your line count higher.
I work for TT, low line counts on ExText for me. nm
nm
Line counts doing hospital work
Does anyone truly get more than 250-300 lph doing hospital work? If so, where do you work?
You needed a Cphone & 2nd line to work there in the past. nm
s
I work for MDI-MD and have worked part-time for Cobb in the past. sm
It has been about 3 years or so since I worked for Cobb Transcription in Georgia (very nice woman, by the way), so my info may be old, but I'll try to help.
Good dictation quality?
Yes for both MDI-MD and Cobb
Steady work?
MDI: For the most part, yes. There have been a few times, but you usually have enough secondary and tertiary accounts to make it through the dry times.
Cobb: I was doing clinic work -- do not recall any times without work.
What are the work types?
MDI-MD has a few radiology and clinic accounts (I think), but probably the majority of the accounts are acute care.
Cobb may have hospital accounts, but all I did with them was clinic work.
Good platform?
MDI uses Bayscribe -- very easy to use.
Cobb used Word.
Pay rate?
MDI pays better than any other company I have encountered.
Cobb's pay rate is kinda low, as I recall, and it was based on being paid by the character.
Paid for 65 cpl with spaces?
Yes for MDI ... as I mentioned above, Cobb paid by the character.
Do you have a flexible schedule?
Yes to both. MDI gives you a 24-hour turnaround time to do your work, and I think the same was true with Cobb.
Weekend work mandatory?
MDI: You are asked to work 2 weekends a month, I think. I pretty much work every weekend, so not sure about the official rules.
Cobb: No.
Employee or IC?
MDI: Statutory employee (they take out FICA, nothing else, so you do not have to pay self-employment tax)
Cobb: Was IC only
Benefits?
No for both
Low or high volume ESLs?
Probably vaies with the account -- probably average with MDI.
I don't recall any ESLs at Cobb.
Dedicated accounts with the same doctors?
MDI: You have a primary account and usually a secondary account -- pretty much the same docs.
Cobb: Yes.
Dialup accepted?
Yes to both, as far as I know. I have had cable so long, I do not recall.
Good luck with your job search. Hope this helps. If you have an offer from MDI, I'd take it -- it is a great place to work! 
Maybe so, her work was bad & she didn't meet line counts
.
I work on that account, NO problems with line counts or the requirements! sm
I have heard of putting the entire team on QA, I have had it happen before. I got released back after 24 hrs because I was fine.
There are issues with a couple of things on that account. It will likely come down to some of the MTs not being allowed to work on that account any longer, which leaves more work for the rest of us. The communication about the issues they are now addressing with 100% QA for all of us have been thorough and when I have not understood something I have asked for clarification. I have one concern that I feel certain they will call me on and that is fine because I can alter my ways and make sure it is right.
I don't know what is wrong with some of you. I suppose there are MTs who don't believe in doing the job 110%. If you are productive AND accurate, you can make very good money at TT, I certainly do. If you think the pay is low, move on...if you are good enough to find another job. TT is a CHOICE for me because when I was looking last fall, I had no fewer than 10 offers and entertained them all, but went to work for TT because I felt I would be happy there. No surprise to me, I am extremely happy.
The 100% QA is not something I am taking personally because it would seem to me that the only way to address the issues at hand is to do this very thing.
Venting- how can you make money or get line counts when all the work is given to someone else!
Nothing seems fair anymore. Does anyone else ever have this happen?
Low line counts; paying long distance; getting crap work skipped by others.
xx
C-phone accounts aren't any better, not enough work to make line counts there either. Sigh
nm
Good & bad posts in the past. Must work 1 Sat. a month. Supposed to be gross line pay. Some days
s
I worked for a temp agency for 3 years..LOVED it. Just worked. No counts, no hassels, GREAT pay..
No benefits at the time. I even learned pathology while temping (8 months on that assigment). I loved the variety, the ability to say I'm not available such and such time. I'd do it again in a heartbeat if I didn't need benefits.
Yes to old reports! Their ExText has all the regular functions except line counts are done on line
s
Line counts - the lower the line count requirements
the harder the account and problems with trying to get production off the platform the company uses.
When I worked for them, it was Chartscript, sm
Word (I think), and WP5.1. Since I had a huge DOS Expander file, I stuck with WP5.1. They use FTP (forgot the brand name) to send files. It was simple and easy to learn--MT friendly.
I was quoted a 65-ch line using Chartscript. nm
xx
Does Keystrokes use Docuscribe? How are they to work for?
I am tired of geting burned by some of the companies that advertise here. I want a job that has a lot of work, does not outsource and have good accounts.
My resume is looking worse and worse because I appear to be job hopping. I want to find a good company where I settle in, work hard and retire in 7 or 8 years.
I worked for MQ for 11 years and loved DocQscribe. I just saw an ad from Keystrokes that they use it and want to know if they are as good as they seem to work for.
This is so confusing. Most of the companies either run out of work, send work to India or conveniently forget to pay for work done. Help! I need a good company!
Does Smart Type work with Docuscribe? sm
entertaining an offer and need to know about this. Thank you.
ChartScript easy to learn/use/good line count?
Please post any experiences you have had with this platform. Also,does Diskriter provide good insurance and have plenty of work?
Is it easy to get required line counts?
who have you worked for in the past - sm
Sometimes it's just getting into the right place at the right time, but if you have already worked for a few places, I don't want to mention their names.
Worked there in the past.
But frequently ran out of work. Finally had to leave.
Well, I worked for them in the past (sm)
and had trouble being paid. There has been info here over the past 3 years showing that it's still going on.
No ad, just though maybe someone worked for them in the past...
I got the same info you did, a few companies by the name of PRN Transcription but I could not find any in MA. One in Illinois, one in Ohio.....?
I worked for Medware in the past, and
at first it was great! They were advertising for ER which was what I wanted, but when I applied they said no ER so I was given Acute Care. The first few months were great. I was in hog heaven. Then overnight things changed and I had nothing but the worst ESLs and my pay went downhill big time!! I tried to get things resolved, so no luck. Otherwise it was great. Easy platform, good communication, etc. If you are lucky enough to get and KEEP good accounts, then it is great!
They must have stopped doing so. I worked there as an IC for a while in the past.
xx
I worked for them in the past. I would not recommend
them to anyone. It was my worst experience ever in my long career in the MT field. Yes, they've relocated to TN.
Anyone who has worked for Milner in the past, SM
would you please email me? I am sending in my resume but would like some information beforehand. Thanks.
I worked for a company in the past that was having
financial problems. They wanted MTs to quit so they didn't have to pay unemployment and they would give me the worst of the worst. I refused to quit, they would have to fire me, but when it became clear that my check might not be good for much longer I quit and they were out of business about a month later.
I don't know if they can manipulate TAT times, but I am getting work that is only minutes old. I know they don't get a lot of work at one time so I don't really think they are hand-picking stuff. I work my schedule, when there was OT I worked extra every week, my QA scores have never been below 99.8 and I feel like they want to keep me. I'm not paranoid, but I am frustrated. On my accounts I know what the situation is, but I wish they would keep us regularly informed about what is going on. I don't want lies, but a little reassurance sure would help.
Getting line counts up
I recently was hired for a national company, after having worked in-house for about 5 years in a physical therapy clinic. I'm still in the training status. Every day when I check my line count, I cannot believe it! It's in the 200-250 area. I know I'm slow, having to look up almost all drugs, many procedures, etc., and I'm adding to the expander program every day, but I don't see how I can get a lot faster. We don't get credit for header information and oftentimes this takes several minutes to look up, add to, correct.
Any suggestions/comments are welcome!
Line counts
Does anyone out there or has anyone out there worked for Transtech Medical Solutions and if so could you provide some input on their line counts and why there are 3 different platforms to figure your lines that give you 3 different figures and final line count is lower than those 3 platforms. Any info would be appreciated.
Thanks
LINE COUNTS
Be that as it may but have you have problems with your line count W?
line counts
I was given $10 guaranteed hourly for the first pay period, unless I did more than the 12,000 lines. That was a joke because I, like you, was, and still am, getting awful dictators. I did not make the 12,000 line requirement until 5 pay periods later. You will get there.....eventually. I can only dream what my line count would be if I had some decent dictators!
Line Counts
Line counts are pretty easy to get. I don't have any problem, but of course, the longer you are with any company/account, the easier line counts get. They require 150 lph, but they aren't sticklers about it, if you don't. (It took me a few months to get to 150, but then after that, 175-180 is about the norm). They let you pick your schedule. They are pretty flexible with that. I work a split shift and it works out great. They have excellent shift differentials. They use Shorthand as their Expander and if you're already using it, you can transfer it in. They have quality equipment. You don't spend a lot of time waiting. As far as demographics go, for the most part, it all pre-fills. Occasionally, you will get a patient you have to look up the name for, but it's easy and doesn't take long. It's an easy system to get used to, as well. You don't have to have 6 different windows open to do one thing. They have normals and examples easily available for different dictators, etc. Overall, it's definitely worth applying and taking the test. (The tests have caused problems for some folks - there's a written one and then 3 or 4 dictation samples).
Line counts
I sure did not have trouble getting between 250-350 lines per hour when I was with MDI at 11 cpl. I quit to take a radiology position that pays gross. The Bayscribe platform is very user friendly and I never had trouble with any of my accounts (2).
Line Counts
I average 250-300+ lph on my acute care account at MDI.
line counts
I most certainly did read it. I was stating that when I paste report into Word it does agree with the DQS line count, not that it does not agree.
Line counts
It really depends on how many characters you do in a day. For instance, if your total chars are 50,000 - then divide that by 65 csl and you get 769 lines total. And the same for a 72 csl - divided by 72 would be 694 lines total.
So the more chars you type the more lines it turns out to be. Figure 85,000 chars would get you 1,307 lines!
csmr-mt
Line counts
Again, I want to ask what can be done bout something... The way are lines are calculated by the MTs is to take 24 x the number of reports we have done in a day and that is just a guesstimate I am told. The owner has a line-counting program called Docu-Count and we do not have have access to that program. Again, when we get our paychecks.. it just shows the line count but we have no way of knowing exactly what our line count is compared to the what the owner comes up with. I have asked a person there at the office who helps with payroll and explained that my line counting program comes up a lot more than the one they use at the office and the response to me was I have to go. Does anyone besides me find this odd and know what I can do about it.. Im afraid to ask him for fear that I will lose my job and I need this job right now. TIA.
line counts
Well, that's good to know. Do you know if we are paid for the headings in the report? I think that might make the difference. I literally go from one IC job in the morning, making right at 300 lph, to struggling for 200 to 225 at Precyse. If we are paid for the headings (which we should be, because they don't appear out of thin air and they all take at least 3 keystrokes), then maybe I'm just too tired to pull off 300 lph at a second job.
TT Line counts
Since the Ichart line counting program for TT has been having problems, I have noticed that my line counts have gone down. Has anyone else experienced this problem? I am starting to get worried about it.
TIA
line counts
anyone working for TTS having trouble with their line counts?
TTS line counts
An email was sent out to all about that earlier. It appears to be an ongoing issue with Dictaphone, and probably something they have no control over. I am sure they will get it straightened out soon, they can't afford not to.
Line counts
Let me ask you this then, to whose benefit is this equipment geared to - not to increase an MTs productivity, give me a break!!!!!!!!!!!!!!!
ichart service, Dictaphone can help you assess the true cost of your current transcription infrastructure.
Past audits have revealed some of the following billing discrepancies:
Inadequate Billing Detail.
No true MT line counting standards for billing.
Challenging Audit Trail and Process.
Special Characters Can Inflate Line Counts By 15%.
Invisible Characters Can Inflate Line Counts Up To 20-40%!
Poorly Designed Templates can lead to Excessive Line Counts.
Multi-page Reports can Drive Excessive Characters and/or hidden words.
Line Counts
Not too long ago there were numerous posts regarding Transtech and the line count situation. I was just wondering if any TransTech employees are still experiencing discrepancies with their line counts.
Thanks
Line Counts
Nope...no problems now or ever. The Dictaphone system might lag from time to time, but it's not TransTech's fault. It's no big deal at all. All we have to do is just wait a couple of hours and the lines count program calculates out. There's just a short lag. I've never lost so much as a character.
line counts
Do you use your own line counter and if so what kind do you use?
line counts are off
If you dont use you own counter to compare then of course you would not notice a discrepancy but if you use your own line counter and your counts are close to what I-Chart then what line counter are you using.
line counts
Yes I have talked with management repeatedly to no avail which is why I posted the question here. It just might be that I am not using the right kind of line counter or have not set my variables correctly. The reason I asked the question is that if others are using their own line counters and their counts are relatively close to I-Chart then I wanted to find out what they were using so that I too could try that and see what happens from there. So, if you are using your own counter if you could tell me what you use that would be very much appreciated.
line counts
True and true,and if it was that I would forget about it but if something is wrong now and it goes on who is to say it won't escalate. But, like I said I just wanted basically to find out what, if any, line counters other transcribers might be using so that I could at least try that.
|
