Double check your line counts.
Posted By: nm on 2007-04-18
In Reply to: I guess no news is good news! :-) - Thanks
p
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
I routinely double check line counts
I have audited my line counts often using Sylcount and the line counts are always pretty much right on compared to BayScribe. I have no reason to believe they fudge on line counts, but I would never take someone's word for it, so I always run audits periodically myself. It has never been a problem.
run as fast as you can. decent line counts are had by double dippng supervisors.
REAL JUNK!
How can we check our line counts
I have asked for a way to determine what my line count is for every chart, and I still don't know how they're determined. I have a much lower line count than with my last company. How do you know the lines are being skimmed? How can we tell?
I check the line counts constantly.-sm
Believe it or not, they're accurate. I have a program that counts these. I wouldn't work for anybody any other way.
Well, you should have no reason to check if you're one of the MTs who gets good line counts.
x
We could check our line counts up-to-the-minute with CTRL I inhouse n/m
b
Always double check your
And then check it again.
You might double check this...
In the 3 states I have lived in, they did not charge to change your phone number if you were changing it due to harassment. And this certainly sounds like harassment!! I can't imagine being called that much by a company I don't work for, telemarketers are bad enough, but at least they have to stop at a certain time of night. Caller ID was the greatest invention ever, I don't answer unless I know who it is and that I want to talk to them. Good luck to you.
Somebody needs to double check
The laws that apply to someone who is an EMPLOYEE may not apply to someone who is a STATUTORY EMPLOYEE, which are two distinctly different classifications. I'll contact TPTB and see what I can find out.
FYI - If you go there, better double check your lines!!!!!! nm
@
Double check - are you sure they didn't say
x
If and when you find one, be sure do double check yourself that you are being paid for what they
:P
Maybe they want to make sure people double check their spelling.
If you are not sure of how they are spelled, you really should look them up.
They are well known brands and easy to look up.
Gosh..does this company start with an F. In any event, you need to double check with your insurance
provider to see the exact date the policy was cancelled. Sometimes, companies have to pay preminums ahead of time. I would just make sure and if they are still taking the money out, you need to send a certified letter telling them to return your money at the point you were paid up and the policy cancelled or reinstate the insurance. Why pay for something your not getting.
Yes to old reports! Their ExText has all the regular functions except line counts are done on line
s
Line counts - the lower the line count requirements
the harder the account and problems with trying to get production off the platform the company uses.
I get double line pay on holidays
usually not much work, cuz we focus on clinic work, but we do get double line rate on the major holidays.
The people who can double their line count
on editing are the ones who have a low line count to begin with because they don't utilize shortcuts and self-made templates, etc. I too can do 2000+ lines a day and have tried editing and my line count went wayyyyy DOWN.
0.0425 on eScription, lot more than double line production.
x
I check my counts against Instant Text sm
I've only been at TT for a short time but I use Instant Text to check my counts after every report based on inclusion of spaces on a 65 character line and when iChart is done updating, the counts agree. In fact, iChart always has more lines than IT does, probably because I don't include the cc or signature line in the count. So, I don't feel cheated.
Getting line counts up
I recently was hired for a national company, after having worked in-house for about 5 years in a physical therapy clinic. I'm still in the training status. Every day when I check my line count, I cannot believe it! It's in the 200-250 area. I know I'm slow, having to look up almost all drugs, many procedures, etc., and I'm adding to the expander program every day, but I don't see how I can get a lot faster. We don't get credit for header information and oftentimes this takes several minutes to look up, add to, correct.
Any suggestions/comments are welcome!
Line counts
Does anyone out there or has anyone out there worked for Transtech Medical Solutions and if so could you provide some input on their line counts and why there are 3 different platforms to figure your lines that give you 3 different figures and final line count is lower than those 3 platforms. Any info would be appreciated.
Thanks
LINE COUNTS
Be that as it may but have you have problems with your line count W?
line counts
I was given $10 guaranteed hourly for the first pay period, unless I did more than the 12,000 lines. That was a joke because I, like you, was, and still am, getting awful dictators. I did not make the 12,000 line requirement until 5 pay periods later. You will get there.....eventually. I can only dream what my line count would be if I had some decent dictators!
Line Counts
Line counts are pretty easy to get. I don't have any problem, but of course, the longer you are with any company/account, the easier line counts get. They require 150 lph, but they aren't sticklers about it, if you don't. (It took me a few months to get to 150, but then after that, 175-180 is about the norm). They let you pick your schedule. They are pretty flexible with that. I work a split shift and it works out great. They have excellent shift differentials. They use Shorthand as their Expander and if you're already using it, you can transfer it in. They have quality equipment. You don't spend a lot of time waiting. As far as demographics go, for the most part, it all pre-fills. Occasionally, you will get a patient you have to look up the name for, but it's easy and doesn't take long. It's an easy system to get used to, as well. You don't have to have 6 different windows open to do one thing. They have normals and examples easily available for different dictators, etc. Overall, it's definitely worth applying and taking the test. (The tests have caused problems for some folks - there's a written one and then 3 or 4 dictation samples).
Line counts
I sure did not have trouble getting between 250-350 lines per hour when I was with MDI at 11 cpl. I quit to take a radiology position that pays gross. The Bayscribe platform is very user friendly and I never had trouble with any of my accounts (2).
Line Counts
I average 250-300+ lph on my acute care account at MDI.
line counts
I most certainly did read it. I was stating that when I paste report into Word it does agree with the DQS line count, not that it does not agree.
Line counts
It really depends on how many characters you do in a day. For instance, if your total chars are 50,000 - then divide that by 65 csl and you get 769 lines total. And the same for a 72 csl - divided by 72 would be 694 lines total.
So the more chars you type the more lines it turns out to be. Figure 85,000 chars would get you 1,307 lines!
csmr-mt
Line counts
Again, I want to ask what can be done bout something... The way are lines are calculated by the MTs is to take 24 x the number of reports we have done in a day and that is just a guesstimate I am told. The owner has a line-counting program called Docu-Count and we do not have have access to that program. Again, when we get our paychecks.. it just shows the line count but we have no way of knowing exactly what our line count is compared to the what the owner comes up with. I have asked a person there at the office who helps with payroll and explained that my line counting program comes up a lot more than the one they use at the office and the response to me was I have to go. Does anyone besides me find this odd and know what I can do about it.. Im afraid to ask him for fear that I will lose my job and I need this job right now. TIA.
line counts
Well, that's good to know. Do you know if we are paid for the headings in the report? I think that might make the difference. I literally go from one IC job in the morning, making right at 300 lph, to struggling for 200 to 225 at Precyse. If we are paid for the headings (which we should be, because they don't appear out of thin air and they all take at least 3 keystrokes), then maybe I'm just too tired to pull off 300 lph at a second job. 
TT Line counts
Since the Ichart line counting program for TT has been having problems, I have noticed that my line counts have gone down. Has anyone else experienced this problem? I am starting to get worried about it.
TIA
line counts
anyone working for TTS having trouble with their line counts?
TTS line counts
An email was sent out to all about that earlier. It appears to be an ongoing issue with Dictaphone, and probably something they have no control over. I am sure they will get it straightened out soon, they can't afford not to.
Line counts
Let me ask you this then, to whose benefit is this equipment geared to - not to increase an MTs productivity, give me a break!!!!!!!!!!!!!!!
ichart service, Dictaphone can help you assess the true cost of your current transcription infrastructure.
Past audits have revealed some of the following billing discrepancies:
Inadequate Billing Detail.
No true MT line counting standards for billing.
Challenging Audit Trail and Process.
Special Characters Can Inflate Line Counts By 15%.
Invisible Characters Can Inflate Line Counts Up To 20-40%!
Poorly Designed Templates can lead to Excessive Line Counts.
Multi-page Reports can Drive Excessive Characters and/or hidden words.
Line Counts
Not too long ago there were numerous posts regarding Transtech and the line count situation. I was just wondering if any TransTech employees are still experiencing discrepancies with their line counts.
Thanks
Line Counts
Nope...no problems now or ever. The Dictaphone system might lag from time to time, but it's not TransTech's fault. It's no big deal at all. All we have to do is just wait a couple of hours and the lines count program calculates out. There's just a short lag. I've never lost so much as a character.
line counts
Do you use your own line counter and if so what kind do you use?
line counts are off
If you dont use you own counter to compare then of course you would not notice a discrepancy but if you use your own line counter and your counts are close to what I-Chart then what line counter are you using.
line counts
Yes I have talked with management repeatedly to no avail which is why I posted the question here. It just might be that I am not using the right kind of line counter or have not set my variables correctly. The reason I asked the question is that if others are using their own line counters and their counts are relatively close to I-Chart then I wanted to find out what they were using so that I too could try that and see what happens from there. So, if you are using your own counter if you could tell me what you use that would be very much appreciated.
line counts
True and true,and if it was that I would forget about it but if something is wrong now and it goes on who is to say it won't escalate. But, like I said I just wanted basically to find out what, if any, line counters other transcribers might be using so that I could at least try that.
TT and line counts
How can they expect you to meet their requirements when they consistently run out of work?
Line Counts
Does anyone else work for a company where you can't check your line counts? Its driving me NUTS! I've worked for them for 3 weeks and my keeping track through the Lanier is always way more than they say I have done. I really like the account but might leave if it keeps up. Any advice appreciated!
Line counts
For the life of me, I cannot find my offer letter with the required lines. Why don't you just go through their website and e mail them, or call. I am sure they will respond. Besides, the requirement may have changed in a year. Good luck!
MDI line counts
Does anyone else have a difficult time making lines with MDI-MD. Doing multispeciality clinic and some discharge. It just seems like an awful lot of typing for little lines. Major struggle. Also it seems as if you are not getting credit for demographics, addresses for letters etc. Do they not pay for headers, footers. What about headings? Something definitely seems odd. There is no real way to get exact lines on Bayscribe. They give you an estimate of line and amount you made but the paystub doesn't even tell you the total lines you did a pay period. Just seems odd
Line counts are low
My line count is down by at least 200 lines per day even though I produce the same amount of documents as I did on the old platform. So, things do not add up.
line counts
I worked for MQ for almost 10 years before going to TT. I make a lot more money with TT than I did with MQ. I was actually being paid 1.5 cpl more at MQ than I am at TT. I work my 40 hours with a heck of a lot less stress and aggravation, and actually feel appreciated. That may not be important to some people, but for some reason it is to me. However, the bottom line is my paycheck. I had dropped about 250.00 a pay period by the time I left MQ with all the changes they had made with work pools and ASR. I now make more money for the same 40 hours, so do I think I am being ripped off, heck no! I have no doubt I am being paid for what I type.
QA and line counts
As has been stated in many of the posts on this board, quality is the top priority at Axolotl. We type what is dictated unless account specifics say otherwise or there is a gross medical error. We do not get docked for sending a report to QA with blanks unless the blanks are excessive on an ongoing period of time. We do not get docked for punctuation. If you type a wrong word, then you get docked. If you do not follow account specifics, then you get docked. If you add or miss a word, you get docked. I have not fallen below 99.2% in 2 years on my monthly audits. The system also allows you to see every edited report. The MTs are also allowed to challenge an error that has been assessed. I have had errors overturned, as well as some that were not overturned.
As far as reaching my line count, I haven't had any problems. I think their platform is the easiest I have ever worked on. MTs are given every tool possible by the company so that they are productive.
I think if an MT has a problem maintaining the QA score and/or reaching 1200 lines, it is that particular person's bad habits.
Line counts
Mine usually post immediately, but I think some accounts are slower than others to post for some reason.
Line counts
I'm disheartened lately by the inability to make my line counts. I'm not a beginner. I have 15 years' experience but have changed companies recently. I didn't want to make another change, but I would like to know if there is a company where you can actually say you know for a fact that you are being paid for each character and each space. When I highlight the lines I have typed I get one figure in Word. Then when I look at my statistics - this is ExText - I'm 75 to 200 lines below that. I can't get a clear answer from anyone on this, and obviously everyone else is satisfied. I think I would start looking around again, but I don't want to get into the same situation at another company.
I hear good things about some of the companies here. If I were going to make a change to be my absolute last one,  can anyone recommend the company they work for. I have 15 years' experience, excellent quality. I NEVER send to QA and maybe have 4 blanks a day and take pride in having a perfect report. I don't mind a fair amount of ESLs. I think the thing I'm looking for is honesty. I can't stand feeling taken advantage of. I would like a company that appreciates the fact that I work my schedule and do my work in a timely manner and shows this appreciation by giving me credit for what I type.
I guess I just need to rant, but I'm getting ready to apply to work at Hobby Lobby and get some enjoyment from my minimum wage.
line counts
TextTally is a good program and you can get this free. The problem is that some companies tell you that you are getting credit for spaces, etc. and they have set the program to not give that. I agree with the other post - you need to have the supervisor show you and tell you exactly what they are counting or not counting - it may be different than what you were told when they hired you. Get direct answers and proof. If you have been misled - move on to an honest company. Good luck.
|
